請校對 %%%%%%%%%%%%%%%%% 翻譯%%% 0f啟動方式07
本救急盤可用于系統恢復，也可用于系統安裝。0flinux07，0framdisk07，和0ffloppy07方式 [EMAIL PROTECTED](root)[EMAIL PROTECTED] 已經存在的根(root)分區。 0f可用的啟動方式︰07 0flinux07 開始安裝 -- 這是默認的方式。 0framdisk007 (或者0framdisk107) [EMAIL PROTECTED](或者第二個)軟驅加載虛擬磁盤(ramdisk)。 0ffloppy007 (或者0ffloppy107) [EMAIL PROTECTED](或者第二個)軟驅內的軟盤。本方式 將佔用更少內存。 [EMAIL PROTECTED] 您可以從其它媒介(如光盤，硬盤等)進行安裝。 0frescue07 啟動並掛載任意根(root)文件系統。根文件系統必須緊隨提示標志後面給出， 比如說，輸入0frescue root=/dev/hda107。 請按<09回車鍵07>或者輸入啟動方式，參數，然後按<09回車鍵07>啟動。 請按功能鍵 <09F107> 查閱幫助索引頁面。 %%%%%%%%%%%%% 0fBOOT METHODS07 The Rescue disk can be used for system recovery as well as for installation. The methods 0flinux07, 0framdisk07, and 0ffloppy07 will boot you into a small standalone root system. The 0frescue07 method will mount an existing root partition. 0fAvailable boot methods:07 0flinux07 Start the installation -- this is the default. 0framdisk007 (or 0framdisk107) Start installation, load the ramdisk from the first (or the second) floppy drive. 0ffloppy007 (or 0ffloppy107) Start installation, mount the floppy in the first (or the second) floppy drive as root. This uses less memory. If you have only one floppy drive, you cannot load base from 0ffloppy007, but you can install from other media (CD, harddisk, etc). 0frescue07 Boot and mount any root filesystem. The root filesystem must be given at the prompt, so e.g., type 0frescue root=/dev/hda107. Press <09ENTER07> or type boot method, arguments, and <09ENTER07> to boot. Press function key <09F107> for the help index. %%%%%%%%%%%%%%%% -- Best regard hashao -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- | This message was re-posted from [email protected] | and converted from gb2312 to big5 by an automatic gateway.
