%%%%%%%%%%%%%% 翻譯 0f特定的啟動參數 - 各種硬件07
您可以在提示符 0fboot:07 後使用以下啟動參數，可同啟動方式(見<09F307>)[EMAIL PROTECTED] 您要使用十六進制數值，您必須使用前綴0x(形如0x300)。 0f硬件 指定的參數07 單色顯示器 0fmono07 顯示器不使用幀緩沖(fb)模式 0fvideo=vc:807 IBM PS/1或者ValuePoint(IDE磁盤) 0fhd=0b柱面數0f,0b磁頭數0f,0b扇區數07 IBM ThinkPad 0ffloppy=thinkpad07 IBM Pentium Microchannel 0fmca-pentium no-hlt07 [EMAIL PROTECTED]/O端口區域 0freserve=0biobase0f,0bextent07[0f,0b...07] 補償有缺限的 FPU (舊型機器) 0fno38707 高級電源管理 0fapm=on07 0f以太網絡設備︰07 [EMAIL PROTECTED] 在安裝過程當中才需要給出參數，啟動的時候不需要。詳情請查閱"安裝手冊"。 請按<09回車鍵07>或者輸入啟動方式，參數，然後按<09回車鍵07>啟動。 請按功能鍵 <09F107> 查閱幫助索引頁面。 %%%%%%%%%%%%%%%%%%%%%%% 0fSPECIAL BOOT ARGUMENTS - VARIOUS HARDWARE07 You can use the following boot arguments at the 0fboot:07 prompt, in combination with the boot method (see <09F307>). If you use hex numbers you have to use the 0x prefix (e.g., 0x300). 0fHARDWARE PARAMETER TO SPECIFY07 Monochrome monitor 0fmono07 Disable framebuffer for monitor 0fvideo=vc:807 IBM PS/1 or ValuePoint (IDE disk) 0fhd=0bcylinders0f,0bheads0f,0bsectors07 IBM ThinkPad 0ffloppy=thinkpad07 IBM Pentium Microchannel 0fmca-pentium no-hlt07 Protect I/O port regions 0freserve=0biobase0f,0bextent07[0f,0b...07] Workaround faulty FPU (old machines) 0fno38707 Advanced Power Management 0fapm=on07 0fEthernet:07 Some ethernet and proprietary CD-ROM drivers are loaded as modules. For such drivers, give parameters for them during the installation process, not at boot. See the Installation Manual for details. Press <09ENTER07> or type boot method, arguments, and <09ENTER07> to boot. Press function key <09F107> for the help index. %%%%%%%%%%%%%%%%%%%% -- Best regard hashao -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- | This message was re-posted from [email protected] | and converted from gb2312 to big5 by an automatic gateway.
