wqinian rao 提到: >好不容易把nvidia裝上，結果安裝x的時候（以前什麼X都沒有裝）現在才開始裝X包，比如task-x-window-system-core >等， >但是安裝task-x-window-system卻要把xfree86等刪了才能裝那兩個rstart >and rstartd，但是裝了後再裝task-x-window-system >的時候又要xfree86等，又要把rstart and >rstartd刪了。如此反復 >不知道如何裝了。我就沒有裝task-x-window-system,用 >dpkg-reconfigure > I never like the virtual package like task-x-window-system. To much dependence problem. If you are using sid, I know the x-window-system package work.
>xserver-xfree86，應該配置沒有錯吧，選那個什麼的時候我選nvidia沒有錯吧？安裝完，我運行startx的時候卻說Failed >to initialize the Nvdriver kernel module，和 >XIO:fatal 20 error 104(Connection reset by peer) on >Xserver ":0:0"after 0 request (0 know processed) with 0 events remainiy >如果運行XFree86就出現Failed to initialize the Nvdriver >kernel module和Fatal server error no screens found >請問是哪裡出錯了？？我在dpkg-reconfigure的時候，好象問了個顯卡的bus吧，我沒有寫，因為lspci沒有顯示那格式啊，比如 >pic:xx:xx:xx只有最開始顯示01:00.0，我這樣輸進去，結果卻 > after you install the module for nvdriver did you load it? run $>lsmod see you loaded it, if not $>modconf and load that. if you have kernel-module loaded and X wouldn't start the X driver may not work with the kernel-module. run $>XFree86 -configure as root, that will give you a config file in root home, match and see the different with your /etc/X11/XF86Config-4 file. Usually it will get the pci scan done for you also. Good luck Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
