--- Alex Lau <[EMAIL PROTECTED]> 的正文：> wqinian rao 提到: > >好不容易把nvidia装上，结果安装x的时候（以前什么X都没有装）现在才开始装X包，比如task-x-window-system-core > >等， > >但是安装task-x-window-system却要把xfree86等删了才能装那两个rstart > >and rstartd，但是装了后再装task-x-window-system > >的时候又要xfree86等，又要把rstart and > >rstartd删了。如此反复 > >不知道如何装了。我就没有装task-x-window-system,用 > >dpkg-reconfigure > > > I never like the virtual package like > task-x-window-system. > To much dependence problem. If you are using sid, I > know the > x-window-system package work. > > >xserver-xfree86，应该配置没有错吧，选那个什么的时候我选nvidia没有错吧？安装完，我运行startx的时候却说Failed > >to initialize the Nvdriver kernel module，和 > >XIO:fatal 20 error 104(Connection reset by peer) on > >Xserver ":0:0"after 0 request (0 know processed) > with 0 events remainiy > >如果运行XFree86就出现Failed to initialize the > Nvdriver > >kernel module和Fatal server error no screens found > >请问是哪里出错了？？我在dpkg-reconfigure的时候，好象问了个显卡的bus吧，我没有写，因为lspci没有显示那格式啊，比如 > >pic:xx:xx:xx只有最开始显示01:00.0，我这样输进去，结果却 > > > after you install the module for nvdriver did you > load it? > run $>lsmod see you loaded it, if not $>modconf and > load that. > if you have kernel-module loaded and X wouldn't > start > the X driver may not work with the kernel-module. > run $>XFree86 -configure as root, that will give you > a config file > in root home, match and see the different with your > /etc/X11/XF86Config-4 file. > Usually it will get the pci scan done for you also. > Good luck > Alex
您好： 我也照你这样做了，lsmod的确没有看见nvidia有关的，但是用modconf也没有找到啊，用XFree86 -configure 是给我了配置文件，但是执行这个命令的时候说mouse有问题，又说能找 到mouse，我ln -s /dev/psaux /dev/mouse是对的吧。。 请问到底我哪里出错了呢？？ _________________________________________________________ Do You Yahoo!? 体坛明星啸聚缤纷赛场 精彩时刻尽在雅虎体育 http://cn.sports.yahoo.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
