"matthew.r.pavlovich.1" wrote:
>I am getting a quirky bug with lilo. I have a 4gig Wide SCSI drive that
>is set to scsi id 0. I can partition the disk, write to the disk, read,
>mount it as /, but I cannot boot from it (The boot flag is set on the
>first primary partition). I have an adaptec 2940UW controller w/ 2.0.33.
>Lilo runs correctly, and the light flashes on the drive, but at boot it
>just hangs..not even a 'Li'. I was wondering if anyone has seen a similar
>problem with lilo and large drives, or lilo and adaptec 2940's. Lilo
>works correctly with another hard drive, that is a 2gig and on the narrow
>bus.
>
Is this relevant? (from lilo docs):
([Lilo produces] <nothing>)
No part of LILO has been loaded. LILO either isn't installed
or the partition on which its boot sector is located isn't active.
--
Oliver Elphick [EMAIL PROTECTED]
Isle of Wight http://www.lfix.co.uk/oliver
PGP key from public servers; key ID 32B8FAA1
========================================
Come to me, all you who labour and are heavily laden, and I will
give you rest. Take my yoke upon you, and learn from me; for I am
meek and lowly in heart, and you shall find rest for your souls.
For my yoke is easy and my burden is light. (Matthew 11: 28-30)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
