Your message dated Sun, 16 Jan 2011 17:57:16 +0100
with message-id <[email protected]>
and subject line Re: Bug#568126: lm-sensors: Resource conflicts policy in
kernel has changed
has caused the Debian Bug report #568126,
regarding lm-sensors: Fails to read my sensors
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
568126: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=568126
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: lm-sensors
Version: 1:3.1.1-4
Severity: normal
Hi,
since the 2010-01-30, "sensors" fails to read my sensors.
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
I haven't changed anything related to my modules or the sensors program
itself, but it fails for a reason I can't find.
sensors-detect points me to i2c-i810 and smsc47m192, which are both loaded:
i2c_i801 7766 0
i2c_core 15584 2 i2c_i801,smsc47m192
I also tried with the Sid version and the same happens.
>From the kernel log, I get things like that, which I don't fully get.
[ 3659.067814] smsc47m1: Found SMSC LPC47M15x/LPC47M192/LPC47M997
[ 3659.067910] ACPI: I/O resource smsc47m1 [0x680-0x6ff] conflicts with ACPI
region RTIO [0x680-0x6ff]
[ 3659.067971] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
Don't hesitate to ask for details. I also noted that it might be a duplicate
of #524038 (same module) or #566184 (It also fails to set the defaults,
obviously).
Best regards,
OdyX
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_CH.UTF-8, LC_CTYPE=fr_CH.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages lm-sensors depends on:
ii libc6 2.10.2-2 GNU C Library: Shared libraries
ii libsensors4 1:3.1.1-4 library to read temperature/voltag
ii lsb-base 3.2-23 Linux Standard Base 3.2 init scrip
ii perl 5.10.1-9 Larry Wall's Practical Extraction
ii sed 4.2.1-6 The GNU sed stream editor
lm-sensors recommends no packages.
Versions of packages lm-sensors suggests:
pn i2c-tools <none> (no description available)
pn read-edid <none> (no description available)
pn sensord <none> (no description available)
-- no debconf information
--- End Message ---
--- Begin Message ---
On Wed, Jan 5, 2011 at 12:44:12 +0100, Didier 'OdyX' Raboud wrote:
> --------->%---------------------
> 5.1.5. Change in kernel policy regarding resource conflicts
>
> The default setting for the acpi_enforce_resources parameter in the new Linux
> kernel version has changed to be "strict" by default. This can lead some
> legacy
> sensor drivers to be denied access the sensors hardware. This can be
> workarounded by setting this parameter to "lax", e.g. by appending
> "acpi_enforce_resources=lax" to the kernel boot line.
> ---------%<---------------------
>
Added in r8136, with the fixes from Steve and Adam. Thanks.
Cheers,
Julien
signature.asc
Description: Digital signature
--- End Message ---
