Package: dpkg
Version: 1.15.4
Severity: grave
Justification: causes non-serious data loss
Hello.
I had next packages installed on my system: perl-base, perl,
perl-modules, perl-doc (all from current unstable, 5.10.1-7).
-8<-
sudo dpkg -i --force-depends --force-conflicts perl_5.10.1-8_amd64.deb
perl-doc_5.10.1-8_all.deb perl-modules_5.10.1-8_all.deb
perl-base_5.10.1-8_amd64.deb
[sudo] password for jackyf:
dpkg: considering removing perl-modules in favour of perl ...
dpkg: warning: ignoring dependency problem with removal of perl-modules:
perl depends on perl-modules (>= 5.10.1-7)
perl-modules is to be removed.
dpkg: warning: ignoring dependency problem with removal of perl-modules:
pristine-tar depends on perl-modules
perl-modules is to be removed.
dpkg: warning: ignoring dependency problem with removal of perl-modules:
libmodule-scandeps-perl depends on perl-modules (>= 5.10.0) |
libmodule-build-perl (>= 0.28)
perl-modules is to be removed.
dpkg: warning: ignoring dependency problem with removal of perl-modules:
libmodule-scandeps-perl depends on perl-modules (>= 5.9.4)
perl-modules is to be removed.
dpkg: warning: ignoring dependency problem with removal of perl-modules:
libtree-avl-perl depends on perl-modules
perl-modules is to be removed.
dpkg: warning: ignoring dependency problem with removal of perl-modules:
libmime-tools-perl depends on perl-modules (>= 5.10)
perl-modules is to be removed.
dpkg: warning: ignoring dependency problem with removal of perl-modules:
po4a depends on perl-modules
perl-modules is to be removed.
dpkg: warning: ignoring dependency problem with removal of perl-modules:
git-core depends on perl-modules
perl-modules is to be removed.
dpkg: warning: ignoring dependency problem with removal of perl-modules:
dpkg-dev depends on perl-modules
perl-modules is to be removed.
dpkg: may have trouble removing perl-modules, as it provides
libmodule-build-perl ...
dpkg: warning: ignoring dependency problem with removal of perl-modules:
libmodule-scandeps-perl depends on perl-modules (>= 5.10.0) |
libmodule-build-perl (>= 0.28)
perl-modules is to be removed.
dpkg: yes, will remove perl-modules in favour of perl.
(Reading database ... 140092 files and directories currently installed.)
Preparing to replace perl 5.10.1-7 (using perl_5.10.1-8_amd64.deb) ...
Unpacking replacement perl ...
Preparing to replace perl-doc 5.10.1-7 (using perl-doc_5.10.1-8_all.deb) ...
Leaving `diversion of /usr/bin/perldoc to /usr/bin/perldoc.stub by perl-doc'
Unpacking replacement perl-doc ...
Unpacking perl-modules (from perl-modules_5.10.1-8_all.deb) ...
Preparing to replace perl-base 5.10.1-7 (using perl-base_5.10.1-8_amd64.deb) ...
Unpacking replacement perl-base ...
Setting up perl-base (5.10.1-8) ...
Processing triggers for man-db ...
Setting up perl (5.10.1-8) ...
Setting up perl-doc (5.10.1-8) ...
->8-
The result: the package 'perl-modules' is not installed (e.g. removed), despite
the direct query to install new version, ignoring any dependency conflicts.
Here is control info for the new packages that had to be installed:
-8<-
$ echo perl_5.10.1-8_amd64.deb perl-doc_5.10.1-8_all.deb
perl-modules_5.10.1-8_all.deb perl-base_5.10.1-8_amd64.deb | xargs -n1 dpkg-deb
-I
new debian package, version 2.0.
size 7807518 bytes: control archive= 32934 bytes.
4668 bytes, 22 lines control
81112 bytes, 1100 lines md5sums
560 bytes, 21 lines * postinst #!/bin/sh
274 bytes, 10 lines * postrm #!/bin/sh
1105 bytes, 31 lines * preinst #!/bin/sh
110 bytes, 8 lines * prerm #!/bin/sh
Package: perl
Version: 5.10.1-8
Architecture: amd64
Maintainer: Niko Tyni <[email protected]>
Installed-Size: 33052
Depends: perl-base (= 5.10.1-8), libbz2-1.0, libc6 (>= 2.4), libdb4.7,
libgdbm3 (>= 1.8.3), zlib1g (>= 1:1.2.3.3.dfsg)
Recommends: netbase, make
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl
Conflicts: libansicolor-perl (<< 1.10-1), libarchive-tar-perl (<< 1.52),
libattribute-handlers-perl (<< 0.85), libautodie-perl (<< 2.06.01),
libcgi-pm-perl (<< 3.43), libcompress-raw-bzip2-perl (<< 2.020),
libcompress-raw-zlib-perl (<< 2.020), libcompress-zlib-perl (<< 2.020),
libcpanplus-perl (<< 0.88), libdigest-md5-perl (<< 2.39), libdigest-sha-perl
(<< 5.47), libextutils-cbuilder-perl (<< 0.2602), libextutils-parsexs-perl (<<
2.2002), libfile-temp-perl (<< 0.22), libi18n-langtags-perl (<< 0.35-1),
libio-compress-base-perl (<< 2.020), libio-compress-bzip2-perl (<< 2.020),
libio-compress-perl (<< 2.020), libio-compress-zlib-perl (<< 2.020),
libio-zlib-perl (<< 1.09), liblocale-codes-perl (<< 2.07),
liblocale-maketext-perl (<< 1.13), liblocale-maketext-simple-perl (<< 0.18-1),
libmath-bigint-perl (<< 1.89), libmime-base64-perl (<< 3.08),
libmodule-build-perl (<< 0.340201), libmodule-corelist-perl (<< 2.18),
libmodule-load-conditional-perl (<< 0.30), libmodule-load-perl (<<
0.16), libmodule-pluggable-perl (<< 3.9), libnet-perl (<= 1:1.19-3),
libnet-ping-perl (<< 2.36), libparams-check-perl (<< 0.26-1), libparent-perl
(<< 0.221), libparse-cpan-meta-perl (<< 1.39), libpod-escapes-perl (<< 1.04),
libpod-parser-perl (<< 1.37), libpod-simple-perl (<< 3.07), libstorable-perl
(<< 2.20), libsys-syslog-perl (<< 0.27), libtest-harness-perl (<< 3.17),
libtest-simple-perl (<< 0.92), libthreads-perl (<< 1.72),
libthreads-shared-perl (<< 1.29), libtime-hires-perl (<< 1.9719),
libtime-piece-perl (<< 1.15), libversion-perl (<< 1:0.7700), perl-doc (<<
5.10.1-1), perl-modules (<< 5.10.1-8~), podlators-perl (<= 2.2.2-1)
Replaces: libansicolor-perl, libarchive-tar-perl (<= 1.38-2),
libattribute-handlers-perl, libautodie-perl, libcgi-pm-perl,
libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl,
libcpanplus-perl, libdigest-md5-perl, libdigest-sha-perl,
libextutils-cbuilder-perl, libextutils-parsexs-perl, libfile-temp-perl,
libi18n-langtags-perl, libio-compress-base-perl, libio-compress-bzip2-perl,
libio-compress-perl, libio-compress-zlib-perl, libio-zlib-perl,
liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl,
libmath-bigint-perl, libmime-base64-perl, libmodule-build-perl,
libmodule-corelist-perl (<< 2.14-2), libmodule-load-conditional-perl,
libmodule-load-perl, libmodule-pluggable-perl, libnet-perl, libnet-ping-perl,
libparams-check-perl, libparent-perl, libparse-cpan-meta-perl,
libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libstorable-perl,
libsys-syslog-perl, libtest-harness-perl, libtest-simple-perl, libthreads-perl,
libth
reads-shared-perl, libtime-hires-perl, libtime-piece-perl, libversion-perl,
perl-base (<< 5.8.8-1), perl-doc (<< 5.8.0-1), perl-modules (<< 5.10.1-8~),
podlators-perl
Provides: data-dumper, libansicolor-perl, libarchive-tar-perl,
libattribute-handlers-perl, libautodie-perl, libcgi-pm-perl,
libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl,
libcpanplus-perl, libdigest-md5-perl, libdigest-sha-perl,
libextutils-cbuilder-perl, libextutils-parsexs-perl, libfile-temp-perl,
libi18n-langtags-perl, libio-compress-base-perl, libio-compress-bzip2-perl,
libio-compress-perl, libio-compress-zlib-perl, libio-zlib-perl,
liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl,
libmath-bigint-perl, libmime-base64-perl, libmodule-build-perl,
libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl,
libmodule-pluggable-perl, libnet-perl, libnet-ping-perl, libparams-check-perl,
libparent-perl, libparse-cpan-meta-perl, libpod-escapes-perl,
libpod-parser-perl, libpod-simple-perl, libstorable-perl, libsys-syslog-perl,
libtest-harness-perl, libtest-simple-perl, libthreads-perl, libthreads-share
d-perl, libtime-hires-perl, libtime-piece-perl, libversion-perl, perl5,
podlators-perl
Section: perl
Priority: standard
Description: Larry Wall's Practical Extraction and Report Language
An interpreted scripting language, known among some as "Unix's Swiss
Army Chainsaw".
.
Perl is optimised for scanning arbitrary text files and system
administration. It has built-in extended regular expression matching
and replacement, a data-flow mechanism to improve security with
setuid scripts and is extensible via modules that can interface to C
libraries.
new debian package, version 2.0.
size 7155472 bytes: control archive= 26095 bytes.
384 bytes, 13 lines control
70224 bytes, 931 lines md5sums
155 bytes, 9 lines * postrm #!/bin/sh
294 bytes, 14 lines * preinst #!/bin/sh
Package: perl-doc
Source: perl
Version: 5.10.1-8
Architecture: all
Maintainer: Niko Tyni <[email protected]>
Installed-Size: 12952
Depends: perl (>= 5.10.1-1)
Suggests: man-browser, groff
Section: doc
Priority: optional
Description: Perl documentation
Perl manual pages, POD documentation and the `perldoc' program. If you are
writing Perl programs, you almost certainly need this.
new debian package, version 2.0.
size 42896 bytes: control archive= 463 bytes.
349 bytes, 12 lines control
152 bytes, 2 lines md5sums
Package: perl-modules
Source: perl
Version: 5.10.1-8
Architecture: all
Maintainer: Niko Tyni <[email protected]>
Installed-Size: 56
Depends: perl (>= 5.10.1-8)
Section: perl
Priority: standard
Description: dummy transitional package
This is the dummy transitional package. The contents of the 'perl-modules'
package is moved to the 'perl' package.
new debian package, version 2.0.
size 1062336 bytes: control archive= 16576 bytes.
877 bytes, 20 lines control
47686 bytes, 591 lines md5sums
37 bytes, 1 lines shlibs
Package: perl-base
Source: perl
Version: 5.10.1-8
Architecture: amd64
Essential: yes
Maintainer: Niko Tyni <[email protected]>
Installed-Size: 4736
Pre-Depends: libc6 (>= 2.4), dpkg (>= 1.14.20)
Suggests: perl
Conflicts: autoconf2.13 (<< 2.13-45), libscalar-list-utils-perl (<< 1:1.18-1),
libxsloader-perl (<< 0.08-1)
Replaces: libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl,
libxsloader-perl, perl (<= 5.10.0-9), perl-modules (<< 5.10.1-1)
Provides: libscalar-list-utils-perl, libxsloader-perl, perl5-base,
perlapi-5.10.0, perlapi-5.10.1
Section: perl
Priority: required
Description: minimal Perl system
Perl is a scripting language used in many system scripts and utilities.
.
This package provides a Perl interpreter and the small subset of the
standard run-time library required to perform basic tasks. For a full
Perl installation, install "perl" and "perl-doc".
->8-
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages dpkg depends on:
ii coreutils 7.5-6 GNU core utilities
ii libc6 2.10.1-2 GNU C Library: Shared libraries
ii lzma 4.43-14 Compression method of 7z format in
dpkg recommends no packages.
Versions of packages dpkg suggests:
ii apt 0.7.24 Advanced front-end for dpkg
-- no debconf information
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
