Control: tags -1 - moreinfo
On 2014-10-17 17:23, Guillem Jover wrote:
> If the package cannot be configured due to unsatisfied dependencies,
> then it will bail out before the 'Setting up' message is printed out.
> That's always been this way. If you mean somethine else then…
Of course. But the package will be configured along the apt-get -f install
> … yes, please explain how to reproduce. :)
Sorry for my brevity in the initial report, was in a hurry ...
and had first noticed this with my non-free packages.
This is in a pbuilder sid amd64 chroot (that nicely builds all my packages)
There are many many "Setting up" lines missing, last example further down
does not need "local" packages.
(pbuild21783)root@zam904:/# dpkg -i /tmp/libpapi5.3_5.3.0-2_amd64.deb
Selecting previously unselected package libpapi5.3:amd64.
(Reading database ... 13776 files and directories currently installed.)
Preparing to unpack .../libpapi5.3_5.3.0-2_amd64.deb ...
Unpacking libpapi5.3:amd64 (5.3.0-2) ...
dpkg: dependency problems prevent configuration of libpapi5.3:amd64:
libpapi5.3:amd64 depends on libpfm4 (>= 4.4.0+git43-gac7e1ce-1); however:
Package libpfm4 is not installed.
dpkg: error processing package libpapi5.3:amd64 (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
libpapi5.3:amd64
# no Setting up, OK
(pbuild21783)root@zam904:/# dpkg -s libpapi5.3:amd64 | head -n 2
Package: libpapi5.3
Status: install ok unpacked
(pbuild21783)root@zam904:/# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following extra packages will be installed:
libpfm4
The following NEW packages will be installed:
libpfm4
0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
Need to get 0 B/165 kB of archives.
After this operation, 1369 kB of additional disk space will be used.
Do you want to continue? [Y/n]
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based
frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line
76, <> line 1.)
debconf: falling back to frontend: Readline
Selecting previously unselected package libpfm4:amd64.
(Reading database ... 13803 files and directories currently installed.)
Preparing to unpack .../libpfm4_4.5.0+git38-g1ca1338-2_amd64.deb ...
Unpacking libpfm4:amd64 (4.5.0+git38-g1ca1338-2) ...
# where is the Setting up?
(pbuild21783)root@zam904:/# dpkg -s libpapi5.3:amd64 | head -n 2
Package: libpapi5.3
Status: install ok installed
(pbuild21783)root@zam904:/# apt-get install libpfm4-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
libpfm4-dev
0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
Need to get 0 B/244 kB of archives.
After this operation, 1814 kB of additional disk space will be used.
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based
frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line
76, <> line 1.)
debconf: falling back to frontend: Readline
Selecting previously unselected package libpfm4-dev:amd64.
(Reading database ... 13809 files and directories currently installed.)
Preparing to unpack .../libpfm4-dev_4.5.0+git38-g1ca1338-2_amd64.deb ...
Unpacking libpfm4-dev:amd64 (4.5.0+git38-g1ca1338-2) ...
# also no Setting up ...
(pbuild21783)root@zam904:/# dpkg -s libpfm4-dev | head -n 2
Package: libpfm4-dev
Status: install ok installed
# OK, lets install something bigger in a new chroot
(pbuild22618)root@zam904:/# apt-get install texlive-base
[...]
Setting up libpixman-1-0:amd64 (0.32.6-3) ...
Setting up libopenjpeg5:amd64 (1:1.5.2-3) ...
Setting up libpoppler46:amd64 (0.26.5-1+b1) ...
Setting up libsm6:amd64 (2:1.2.2-1) ...
Setting up libxau6:amd64 (1:1.0.8-1) ...
Setting up libxdmcp6:amd64 (1:1.1.1-1) ...
Setting up libxcb1:amd64 (1.10-3) ...
Setting up libx11-data (2:1.6.2-3) ...
Setting up libx11-6:amd64 (2:1.6.2-3) ...
Setting up libxext6:amd64 (2:1.3.3-1) ...
Setting up libxt6:amd64 (1:1.1.4-1) ...
Setting up libxmu6:amd64 (2:1.1.2-1) ...
Setting up libxpm4:amd64 (1:3.5.11-1) ...
Setting up libxaw7:amd64 (2:1.0.12-2) ...
Setting up libxi6:amd64 (2:1.7.4-1) ...
Setting up libzzip-0-13:amd64 (0.13.62-3) ...
Setting up poppler-data (0.4.7-1) ...
Setting up libjbig2dec0 (0.11+20120125-1) ...
Setting up libgs9-common (9.06~dfsg-1) ...
Setting up libkpathsea6 (2014.20140926.35254-2) ...
Setting up libpaper-utils (1.1.24+nmu3) ...
Setting up libpotrace0 (1.11-2) ...
Setting up libptexenc1 (2014.20140926.35254-2) ...
Setting up libsynctex1 (2014.20140926.35254-2) ...
Setting up tex-common (5.02) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based
frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line
76.)
debconf: falling back to frontend: Readline
Setting up xdg-utils (1.1.0~rc1+git20111210-7.1) ...
Setting up libcupsimage2:amd64 (1.7.5-4+b1) ...
Setting up libcupsfilters1:amd64 (1.0.61-2) ...
Setting up libgs9 (9.06~dfsg-1+b1) ...
Setting up texlive-binaries (2014.20140926.35254-2) ...
update-alternatives: using /usr/bin/xdvi-xaw to provide /usr/bin/xdvi.bin
(xdvi.bin) in auto mode
update-alternatives: using /usr/bin/bibtex.original to provide /usr/bin/bibtex
(bibtex) in auto mode
mktexlsr: Updating /var/lib/texmf/ls-R-TEXLIVEDIST...
mktexlsr: Updating /var/lib/texmf/ls-R-TEXMFMAIN...
mktexlsr: Updating /var/lib/texmf/ls-R...
mktexlsr: Done.
Building format(s) --refresh.
This may take some time... done.
Setting up texlive-base (2014.20140927-1) ...
mktexlsr: Updating /var/lib/texmf/ls-R-TEXLIVEDIST...
mktexlsr: Updating /var/lib/texmf/ls-R-TEXMFMAIN...
mktexlsr: Updating /var/lib/texmf/ls-R...
mktexlsr: Done.
/usr/bin/tl-paper: setting paper size for dvips to a4.
/usr/bin/tl-paper: setting paper size for dvipdfmx to a4.
/usr/bin/tl-paper: setting paper size for xdvi to a4.
/usr/bin/tl-paper: setting paper size for pdftex to a4.
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based
frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line
76.)
debconf: falling back to frontend: Readline
Running mktexlsr. This may take some time... done.
Building format(s) --all.
This may take some time... done.
Processing triggers for libc-bin (2.19-11) ...
Processing triggers for tex-common (5.02) ...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based
frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line
76.)
debconf: falling back to frontend: Readline
Running updmap-sys. This may take some time... done.
Running mktexlsr /var/lib/texmf ... done.
# that looked OK
(pbuild22618)root@zam904:/# apt-get install libpfm4-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libpfm4
The following NEW packages will be installed:
libpfm4 libpfm4-dev
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/409 kB of archives.
After this operation, 3183 kB of additional disk space will be used.
Do you want to continue? [Y/n]
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based
frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line
76, <> line 2.)
debconf: falling back to frontend: Readline
Selecting previously unselected package libpfm4:amd64.
(Reading database ... 20075 files and directories currently installed.)
Preparing to unpack .../libpfm4_4.5.0+git38-g1ca1338-2_amd64.deb ...
Unpacking libpfm4:amd64 (4.5.0+git38-g1ca1338-2) ...
Selecting previously unselected package libpfm4-dev:amd64.
Preparing to unpack .../libpfm4-dev_4.5.0+git38-g1ca1338-2_amd64.deb ...
Unpacking libpfm4-dev:amd64 (4.5.0+git38-g1ca1338-2) ...
# and again nothing ...
Andreas
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
