-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
> <zitiere wer="Jonas Smedegaard"> > > > Ok, all commands include full path so that's not it. > > oops! In the original posting the script-entry > RCFILE_01 = nbd > has got no path! > I remember Steffen posted it on [EMAIL PROTECTED] > too and mentioned, he manually called the script _with_full_path_ ! in this case nbd is a full path, there is a script called nbd in /opt/ ltsp/i386/etc/rc.d/nbd, which then starts the nbd-server-script, enclosed i send it to you. I also did a strace for debugging, but the result tells me only that the trace gives the same output as when i do it manually from the prompt. The only difference is that there's a -------> unfinished at the end. The nbd-server is stopped then, but i don't know why. Enclosed i send you the scripts again and my lts.conf. nbd (/opt/ltsp/i386/etc/rc.d/) nbd-server-script (opt/ltsp/i386/bin/) lts.conf (opt/ltsp/i386/etc/) nbd-server (/opt/ltsp/i386/bin/) (it is the binary from the deb-package) BTW during the booting the script will be executed and it creates the device fd0, but the nbd-server will be terminated later, but that was all which i can see during the strace. Thx for help or advices Greetings Steffen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFB9mba62zWxYk/rQcRAqakAJwL3kjK59vdHHtGl+1QVw6XAEGf0QCeJwdT PWNtX5KutnUdIPDPOuHJiKs= =AwFm -----END PGP SIGNATURE-----
nbd-server
Description: application/executable
nbd-server-script
Description: application/shellscript
#
# Config file for the Linux Terminal Server Project (www.ltsp.org)
#
[Default]
SERVER = 192.168.0.254
XSERVER = auto
X_MOUSE_PROTOCOL = "Auto"
X_MOUSE_DEVICE = "/dev/ttyS1"
X_MOUSE_BUTTONS = 3
USE_XFS = Y
XkbLayout = de
SEARCH_DOMAIN = intern
USE_NFS_SWAP = Y
SWAPFILE_SIZE = 32m
LOCAL_APPS = N
RUNLEVEL = 3
RCFILE_01 = nbd
#------------------------------------------------------------------------------
#
# Example of specifying X settings for a workstation
#
[ws001]
XSERVER = auto
LOCAL_APPS = N
USE_NFS_SWAP = N
SWAPFILE_SIZE = 48m
RUNLEVEL = 5
[ws002]
XSERVER = XF86_SVGA
LOCAL_APPS = N
USE_NFS_SWAP = N
SWAPFILE_SIZE = 64m
RUNLEVEL = 3
#
# ws004 is my virtual workstation running in a VMware session
#
[ws004]
DNS_SERVER = 192.168.0.254
XSERVER = auto
X4_BUSID = "PCI:0:15:0"
X_MODE_0 = 800x600
LOCAL_APPS = N
USE_NFS_SWAP = N
SWAPFILE_SIZE = 64m
RUNLEVEL = 5
#------------------------------------------------------------------------------
#
# Example of a workstation configured to load some modules
#
#[ws001]
# MODULE_01 = agpgart.o # This is for i810 video
# MODULE_02 = uart401.o
# MODULE_03 = sb.o io=0x220 irq=5 dma=1
# MODULE_04 = opl3.o
#------------------------------------------------------------------------------
#
# Example of ws001 configured for local apps
#
#[ws001]
# LOCAL_APPS = Y
# LOCAL_WM = Y
# NIS_DOMAIN = ltsp
# NIS_SERVER = 192.168.0.254
#------------------------------------------------------------------------------
#
# Example of a serial printer attached to /dev/ttyS1 on workstation ws001
#
#[ws001]
# PRINTER_0_DEVICE = /dev/ttyS1
# PRINTER_0_TYPE = S # P-Parallel, S-Serial
# PRINTER_0_PORT = 9100 # tcp/ip port: defaults to 9100
# PRINTER_0_SPEED = 9600 # baud rate: defaults to 9600
# PRINTER_0_FLOWCTRL = S # Flow control: S-Software (XON/XOFF),
# # H-Hardware (CTS/RTS)
# PRINTER_0_PARITY = N # Parity: N-None, E-Even, O-Odd
# # (defaults to 'N')
# PRINTER_0_DATABITS = 8 # Databits: 5,6,7,8 (defaults to 8)
nbd
Description: application/shellscript
