Ole Bendik Kvisberg skrev:
Ragnar Wisloff <[EMAIL PROTECTED]>:
Did you make it run just of the box?
I'm not 100% sure but I remember starting a local console on the client to debug something, and I think devfs fooled me in the beginning.
I was able to access the pen having restarted floppyd with the devfs-device after having changed manually the permissions. But after removing and reinserting the pen no access was possible.
So I wonder if it is correct for floppyd to use the static /dev/sda1 or whatever device, perhaps the correct device is the devfs one. And possibly floppyd does not handle devfs very well.
I ended up using something like /dev/scsi/host0/bus0/target0/lun0/part1 and had to add mtools_skip_check=1 to mtoolsrc. (we needed the floppy drive, so I kinda stopped here, but i worked)
OK, I'll try that, thanks for the tip. That devfs device is what I had in mind.
Have you tried to mount the usb storage using the mount command on the thin client?
Yes. It mounts fine manually in the shell.
-- Med vennlig hilsen Ragnar Wisl�ff ------------- life is a reach. then you gybe.
