Valerio Pachera skrev: > Shortly: a new installation of diabina-edu on a sigle partition of > 15Gb (ext3) with 600Mb of swap was taking very long time to boot > (almost 6 minutes). > The splash screen was shown for short time, just after the message > "loading initial driver" it disappear showing messages. > The message shown is blaiming about nss_ldap "nss_ldap failed to bind > LDAP server...". > .... > --- > At that point I noticed that I didn't plug the PCMCIA ethernet card > (usualy used like eth0 by debian edu). > I pluged it and rebooted. It took 4'08'' and the splashcreen last till > the message "loading essential drivers".
Try setting up an nic dummy0 with ip 10.0.2.2 and netmask 255.255.255.255 And you can try to setup eth0 with allow-hotplug, instead of auto. I guess things will boot faster then. Not sure if bind and dhcp will restart if you plug in eth0 after the machine is started, but I guess you can tell me :) -- Finn-Arne Johansen [EMAIL PROTECTED] http://bzz.no/ EE2A71C6403A3D191FCDC043006F1215062E6642 062E6642 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
