Am Dienstag, 24. Januar 2012, 14:43:54 schrieb Frank Weißer:> Am 24.01.2012 14:27, schrieb Mike Gabriel:> > Hi Petter,> >> > On Di 24 Jan 2012 13:16:43 CET Petter Reinholdtsen wrote:> >> I've discovered a problem with our new backbone network setup. Trying> >> to configure a Linksys Wireless-G broadband router to use 10.0.0.8/8> >> is impossible. Its default firmware can not handle less than /24. It> >> provide /24, /25, /27, etc. but not /8. I suspect this is the case> >> with other consumer broadband routers too.> >>> >> Should we care? This make it harder to test the full Skolelinux setup> >> with common hardware. :(> >> > Sounds like a crap firmware to me... Is Gosa "a crap software" because it doesn't support a /23 network mask? > > I would no care. I have never encountered that with other devices. But I> > > > am no hardware specialist...> I had the same issue some years ago with a > > D-Link printserver.> D-Link-hotline told something like "Our printserver is > > designed for> home-networks. So other masks then 24-bit are not needed".>> > > For linksys -routers i guess there should be the possibility to flash> > > something like[...] I'd prefer to have a possibility to change the ip address range (we have 10.1.1/8, 10.1.2/8 ... networks in our school).just my 2¢ Georg
--- Nutzen Sie freenet Mail optimal angepasst für Ihr iPhone, Android oder Nokia Handy auch von unterwegs. Alle Infos und Download unter http://mail.freenet.de/mobile-email/index.html -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
