Ah I see, thank you. But I didn't go that way to switch to diskless ws.
I modified the configuration File where the runlevel is set due to the
IP-Adress. Maybe there Is my Problem.
Bye
Sebastian
Am 07.11.2012 21:30, schrieb Wolfgang Schweer:
On Wed, Nov 07, 2012 at 06:58:55PM +0100, Sebastian Holl wrote:
Am 07.11.2012 17:35, schrieb Wolfgang Schweer:
There are two predefined subnets in LDAP, 192.168.0.0/24 and
192.168.1.0/24 and also two entries for LTSP-Servers (ltspserver00 and
ltspserver01). By default a machine installed as LTSP-Server has
192.168.0.0/24 and 192.168.0.254 as IP for eth1. I'd propose to change
that to 192.168.1.0/24 with 192.168.1.254 as IP for eth1 for the second
LTSP-Server and to configure the Diskless Clients using GOSA² to match
the different networks. Did you consider this already?
No I didn't. How do i configure the Clients via GOSA? I cannot find
a hint in the documentation how to do this.
At the End of Chapter 18.2.3 in the manual; not much text, indeed.
But you must have done similar configuration before when running
machines in the net 192.168.0.0/24 as diskless ws?
Only thing that differs is to use IPs 192.168.1.1 to 192.168.1.19 for
machines behind the second LSTP-Server.
There's a drop down list for the zone field of DNS. Choose
TJENER/subnet00.intern. if entering an IP like 192.168.0.2 and
TJENER/subnet01.intern. if entering an IP like 192.168.1.1
Wolfgang
--
[email protected]
<mailto:[email protected]>
Marion-Dönhoff-Realschule plus
57537 Wissen
Im Kreuztal 108
Tel.: (02742) 2571
Fax.: (02742) 910935
www.realschuleplus-wissen.de <http://www.realschuleplus-wissen.de>
Marion-Dönhoff-Realschule plus
