>>>>> "DI" == Damyan Ivanov <[email protected]> writes:
DI> -=| Trent W. Buck, Fri, Apr 16, 2010 at 12:35:33PM +1000 |=- >> [email protected] writes: >> >> > The first few seconds of >> > $ beep -l 11111 In fact 5, corresponding to the parameter below. Single instances of plain $ beep mostly don't beep at all. I.e., bye bye mail notification, etc. >> > are normal, the remainder very low volume. The number of seconds vary. >> > How does one toggle auto-suspending, if indeed that is the problem? >> >> sudo tee <<<0 /sys/module/snd_hda_intel/parameters/power_save # turn it off OK, in /etc/rc.local I now do echo 0 >| /sys/module/snd_hda_intel/parameters/power_save Now all the beeps get through (except the very first one after boot, but maybe I will put a short low volume beep there in /etc/rc.local to cover that too.) DI> I seem to have the following in /etc/modprobe.d/eeepc.conf: DI> options snd_hda_intel power_save=5 model=eeepc-901 I found options snd_hda_intel power_save=5 there. But why? Taking it out and rebooting shows the same 5 value in /sys/module/snd_hda_intel/parameters/power_save . And shouldn't the default be 0 to reduce aforementioned broken behavior too? EEEPC 702. _______________________________________________ Debian-eeepc-devel mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/debian-eeepc-devel
