Have you looked at the Xilinx Virtex-II Pro?
Memec has some very nice V2P boards. They start at $200. You can get 3.125 Mbs Rocket I/O or ethernet or both.
Try this link.
http://legacy.memec.com/devkits/americas.shtml
Here's the details on one kit that cost $1695. Its overkill for what you want, and I'm sure you can find the right features for a cheaper price, but I just don't have time to do the research for you. Good luck!
-mike wellington [EMAIL PROTECTED] [EMAIL PROTECTED]
Virtex-II Pro FF1152 Development Kit Includes:
* Virtex-II Pro FF1152 System Board
o Virtex-II Pro FPGA device (2VP20, 2VP30, or 2VP50 in the FF1152)
o Six RocketIO transceivers (3.125 Gbps)
o Two iSFP interfaces (3.125 Gbps)
o 16-Bit Tx/Rx LVDS interface
o 10/100 Ethernet PHY
o Two SDRAM Memory Blocks
(32 MB each, x32 memory configuration)
o P160 Expansion slot
o System ACE interface
o IDE interface and two serial ports
o Three programmable LVDS clocks
o User switches and LEDs
o Two standard clock sources
o 2 x 16 Character LCD
o JTAG, CPU debug, CPU JTAG ports
* MGT and serial port cables
* Xilinx Embedded Development Kit (EDK) software
* AC/DC power supply adapter
* Complete reference designs with source code
(VHDL and/or Verilog HDL)
* Optional SFP optical modules
* Bundled software options
Or
Sadegh Aliakbary wrote:
Hi all
I want an embedded system with these features:
- At least two 100Mbps Ethernet
- High performance for processing the Ethernets traffic (about 30 Mbps bandwidth)
- An embedded OS (Linux is preferred)
What do you recommend me?
Best Regards
_Sadegh Aliakbary_
------------------------------------------------------------------------
Do you Yahoo!?
Yahoo! Photos: High-quality 4x6 digital prints for 25� <http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=23765/*http://photos.yahoo.c om/ph/print_splash>
