hello ! I made a embedded board with the cirrus ep7312 (arm720t) and I have running linux kernel 2.6.7. My base was the toolchain from uclibc project and it works fine with 2.6 and it is easy to use. http://www.uclibc.org/
/Harald --- Harald Krammer Brucknerstrasse 33 A - 4020 Linz AUSTRIA Mobil +43.(0) 664. 130 59 58 Mail: [EMAIL PROTECTED] Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html ----- Originalnachricht ----- Von: Allen Curtis <[EMAIL PROTECTED]> Datum: Donnerstag, 9. September 2004, 15:25 Betreff: Emdebian ready for 2.6 development? > I have been anxiously following this development in hopes of using > it > on our project. I am working on am ARM9, handheld device, based on > the > TI OMAP 5910. We are using virtually every feature of this chip so > we > have decided to use the 2.6 kernel to get active development > support. > Building a cross development toolchain was a relatively minor > problem. > We can compile and run u-boot, 2.4 Linux and 2.6 Linux. Our main > problem now is getting a functional file-system. This should be > easy > with Busybox but we are having various problems and it is > difficult to > determine which component is to blame. > > So, Emdebian to the rescue? The website still has old tools which > will > not work for 2.6 development. Perhaps someone could provide > pointers on > how to get started.... > > TIA! > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] >
