Hi > Setting up debian-archive-keyring (2009.01.31em1) ... > gpg: symbol lookup error: /lib/libreadline.so.5: undefined symbol: PC > gpg: symbol lookup error: /lib/libreadline.so.5: undefined symbol: PC > gpg: symbol lookup error: /lib/libreadline.so.5: undefined symbol: PC > dpkg: error processing debian-archive-keyring (--configure): > subprocess post-installation script returned error exit status 127
> Does libreadline exist at that path in the rootfs? What version? Yes, libreadline.so.5 exists under /lib. Will it affect the working. Another question, My arm board booted into emdebian filesystem, but /sbin appears as a file. I cant use the commands like ifconfig. Any suggestions? Thanks. Aman. On Thu, Apr 23, 2009 at 5:12 PM, Neil Williams <[email protected]> wrote: > On Thu, 23 Apr 2009 11:13:17 -0300 > Amandeep Bhullar <[email protected]> wrote: > > > My ARM board AT91SAM9263-EK is running linux that I came with the > > board as linux demo. It is running from NAND flash and has a jffs2 > > filesystem (not NFS). It is probably running an Angstrom based > > filesystem. You are right, the NAND flash is partitioned in different > > partitions for kernel, rootfs etc. So what I have done is (I dont > > know if I did the right thing), copied the emdebian-arm.tgz on a USB > > stick, mounted it on the board running linux and gave command tar > > -xzpf emdebian-arm.tgz and ./emsecondstage in the folder Emdebian I > > created. Here is what happened: > > That sounds OK so far. > > > Setting up libc6 (2.7-18em1) ... > > Alignment trap: iconvconfig (2310) PC=0x00009960 Instr=0xe5952000 > > Address=0x0005 > > 875e FSR 0x013 > > Alignment trap: iconvconfig (2310) PC=0x00009960 Instr=0xe5952000 > > Address=0x0005 > > 876a FSR 0x013 > > Alignment trap: iconvconfig (2310) PC=0x00009960 Instr=0xe5952000 > > Address=0x0005 > > 8786 FSR 0x001 > > That's a possible problem. > > > Setting up base-passwd (3.5.20em1) ... > > > > update-passwd has found some differences between your system accounts > > and the current Debian defaults. It is advisable to allow > > Hmm, thought I'd fixed that. > > > Setting up debian-archive-keyring (2009.01.31em1) ... > > gpg: symbol lookup error: /lib/libreadline.so.5: undefined symbol: PC > > gpg: symbol lookup error: /lib/libreadline.so.5: undefined symbol: PC > > gpg: symbol lookup error: /lib/libreadline.so.5: undefined symbol: PC > > dpkg: error processing debian-archive-keyring (--configure): > > subprocess post-installation script returned error exit status 127 > > Does libreadline exist at that path in the rootfs? What version? > > > My question is - di dI do the right thing? What is the error about > > debian-archive-keyring : > > Not sure, not seen it before. > > > If I was not to run it from within linux, then how should I? > > What do you mean? > > Does the board now boot and can gpg work after boot? > > > Please > > help.Thanks. > > > > Aman. > > Emdebian Crush isn't problem-free, various niggles like this come and > go. Not all actually cause significant breakage. It depends if gpg can > work after initial setup or whether it is a continuing error. > > -- > > > Neil Williams > ============= > http://www.data-freedom.org/ > http://www.linux.codehelp.co.uk/ > http://e-mail.is-not-s.ms/ > >
