Check out the Advanced Routing HowTo at
http://www.tldp.org/HOWTO/Adv-Routing-HOWTO/ You can certainly do that with iproute 2. Good luck, adc On Sun, Nov 03, 2002 at 09:40:15PM -0500, Mike Kelland wrote: > Hi Everyone, > > I'm trying to set up my server to masquerade 1 set of computers through > one connection to the internet and another set of computers through > another. The specs are as follows: > > Server is a 600 MHz Celeron running a variety of things (email, Web, SSH, > etc...) and acting as a router for the house. > > Internet connections consist of a cable (set up with dhcp) internet > connection and an ADSL (pppoe) connection. > > The topology consists of 3 network cards in the server, each connected to > a different segment: > eth0 - Cable internet connection > eth1 - Connection to internal hub (all internal computers are set up with > static ips) > eth2/ppp0 - Connection to ADSL > > The current setup consists of my computers being masq'd through eth0 and > eth2/ppp sitting idle. The plan is to have my parents' computer be masq'd > through ppp0 while keeping mine the way they are. Anyone have any > suggestions on how this might be accomplished? > > Thanks! > Mike > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
