Hey thanks! Everything seems to be working fine now and i am on my way to setting up shorewall. I feel like a goof for not knowing to leave out the gateway. I did have static in there rather than dhcp, it was an email typo. But thanks for the sharp eye. Just to clarify, in this situation i only need to use the gateway that is given via dhcp and when i tried to assign one to eth1 it was confusing things?
rick on 8/8/03 6:09 PM, Jamin W. Collins at [EMAIL PROTECTED] wrote: > On Fri, Aug 08, 2003 at 05:43:46PM -0500, Rick Perry wrote: >> >> I have a cable modem connected to eth0 using DCHP and eth1 is >> connected to my internal network. Both NICS work and ive tested them >> both using DHCP and the modem. The trouble is when i bring up both of >> them (one configured for dhcp and one for 192.168.0.1). When they are >> both up the network stops working. I am unable to resolve any host >> names or make any connections. >> >> my /etc/network/interfaces looks like this >> >> auto lo >> iface lo inet loopback >> >> auto eth0 [email protected]> >> iface eth0 inet dhcp >> >> auto eth1 >> iface eth1 inet dhcp > ^^^^ > Missed this on the first go round, but the above should be "static" if > you are defining the ip as you are.
