> On Mon, May 10, 2004 at 12:34:07PM -0400, Edward Chase wrote: > > > # ifconfig -a > > > eth0 Link encap:Ethernet HWaddr 00:60:08:35:05:0C > > > inet addr:10.1.50.27 Bcast:10.1.255.255 > Mask:255.255.0.0 > > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > ... > > > > eth1 Link encap:Ethernet HWaddr 00:20:AF:99:98:2A > > > inet addr:192.168.50.1 Bcast:192.168.50.255 > > > Mask:255.255.255.0 > > > BROADCAST MULTICAST MTU:1500 Metric:1 > ^ > No "UP" here. > > >
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Douglas Maxwell > Sent: Monday, May 10, 2004 12:50 PM > To: [email protected] > Subject: Re: firewall setup - firewall newbie > > > The interface appears to be configured, but not active. Try > "ifconfig eth1 up". Do you have "auto eth1" in your > /etc/network/interfaces? > > Doug I hadn't noticed that... (not being up) I can ping it... (from the local console only) Yes, it is "auto eth1". Here's my /etc/network/interfaces auto eth0 iface eth0 inet static address 10.1.50.27 netmask 255.255.0.0 network 10.1.0.0 broadcast 10.1.255.255 gateway 10.1.1.10 auto eth1 iface eth1 inet static address 192.168.50.1 netmask 255.255.255.0 network 192.168.50.0 broadcast 192.168.50.255 # gateway 10.1.1.10 up route add -net 192.168.50.0 netmask 255.255.255.0 gw 192.168.50.1 # up route add default gw 192.168.1.200 # down route del default gw 192.168.1.200 down route del -net 192.168.50.0 netmask 255.255.255.0 gw 192.168.50.1 Also... # ifconfig eth1 up SIOCSIFFLAGS: Device or resource busy I just noticed... Interrupt 5 in both cases for the nic... That could be an issue, yes?
