Hi, I have this configuration: 2 servers each one with two NICs, all of them connected to a the same router with 5 switched ports.
1st. server: eth0 = 10.0.0.24/255.255.255.0 eth1 = 192.168.0.24/255.255.255.0 2nd. server: eth0 = 10.0.0.25/255.255.255.0 eth1 = 192.168.0.25/255.255.255.0 Router/Switch: address: 192.168.0.1 I can ping (another PC) 192.168.0.3, from 1st, and 2nd. and the ping goes through the interface that starts with 192.... but ... ... when I try to ping from 1st. server to 10.0.0.25 I don't get any response, and the same happens when I try to ping from 2nd. server to 10.0.0.24 I am pretty sure that I am doing something wrong ... but I'm a newbie and can't tell what it is. route command result in 1st. server: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.0 * 255.255.255.0 U 0 0 0 eth0 localnet * 255.255.255.0 U 0 0 0 eth1 default 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 route command result in 2nd. server: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.0 * 255.255.255.0 U 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 default 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 Thanks,
