-----Original Message----- From: Beeman <[email protected]> To: [email protected] Subject: Re: Using shorewall Date: Thu, 12 Feb 2009 16:12:39 -0800 Mailer: Thunderbird 2.0.0.19 (Windows/20081209)
Try tossing a copy of webmin on your box. I find the shorewall plugin to be helpful. Paolo is right, the interfaces need to be initialized in /etc/network/interfaces. If you dig through the init scripts, you'll find this script is called before the typical firewall script. Now I don't recall if shorewall tries to own that or not. Have to check the docs. -sp Paolo wrote: > On Thu, Feb 12, 2009 at 03:05:14PM -0500, john wrote: > ... > > > I have set up shorewall with eth0 going to my existing d-link router. > > eth1 and eth2 are planned for a dmz and a loc. I have used the setup and > > > > what's your final /etc/network/interfaces ? > what do ifconfig(8) or ip(8) report? > > > > lines from /var/log/shorewall-init.log): > > > > Setting up masquerading/SNAT.... > > ERROR: Unable to determine routes through interface "eth1" > > > > perhaps some more log line would help ? ... > > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Thanks to both of you for the help - you have given me some pointers to try over this weekend. I'll report back with the solution or more questions. John -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
