Bien ! Merci St�phane, c'est devenu beucoup plus lumineux et �� marche pour http. Me reste plus qu'� le d�clarer routeur Juste une question l'adresse distante reste � 10.0.0.2 : Est-ce un pb? ------------------------------------------------------------- Ci dessous mon ipppd.ippp0
# Options file for ipppd. # ipppd will not read /etc/ppp/options or /etc/ppp/ioptions or any other # config file. Everything has to be in here. # "peer" is the name for our syncppp partner. # STANDARD OPTIONS debug # enable debugging #kdebug X # set kernel debugging level to X #nodetach # (no) fork to the background #callback X # ask for callback (parameter X ?) #lock # create a lock file for device #domain X # add domain X to a given hostname #pidfile X # save pid in file X #call X # take options from privileges file (???) #idle X # idle time limit (seconds) #holdoff X # holdoff time limit (seconds) maxconnect 360 # set maximum connection time (in seconds ?) #+mp # enable multi line ppp #+pwlog # log password (WARNING: possible security hole) #nomagic # magic number negotiation # ppp handshake : tuning #silent # don't even try to initiate the connection #passive # wait for the peer to initiate the connection #lcp-echo-failure X # consecutive echo failures #lcp-echo-interval X # time for lcp echo events lcp-restart 1 # Set timeout for LCP #lcp-max-terminate X # Set max #xmits for term-reqs #lcp-max-configure X # Set max #xmits for conf-reqs #lcp-max-failure X # Set max #conf-naks for LCP # AUTHENTICATION name fti/hhtcy9y # local name for auth XXX_ #user fti/hhtcy9y # set name for auth with peer; default is value for name #usehostname # use hostname for auth #remotename X # set remote name for auth noauth # (dont) require peer (the other) to auth #require-pap # allow only pap authentication (dialin only) #require-chap # allow only chap authentication (dialin only) #login # use system password database for pap #papcrypt # pap passwords are encrypted # AUTHENTICATION TUNING #pap-restart X # Set retransmit timeout for PAP #pap-max-authreq X # Set max #xmits for auth-reqs #pap-timeout X # Set time limit for peer PAP auth. #chap-restart X # Set timeout for CHAP #chap-max-challenge X # Set max #xmits for challenge #chap-interval X # Set interval for rechallenge # COMPRESSION #noaccomp # address compression on/off #nopcomp # protocol field compression on/off #novj # van jacobsen compression on/off #novjccomp # van jacobsen connection-ID compression on/off #vj-max-slots X # tune maximum vj header slots #nobsdcomp # bsd compression on/off #nodeflate # deflate compression on/off #nopredictor1 # predictor1 compression in/off #noccp # compression negotation on/off #nolzs # LZS compression off (not yet supported fully) # IP NETWORKING #noip # en/disable ip transfer #X:Y # set local ip to X, remote ip to Y #noipdefault # don't use name for default ip addr useifip # use ip addresses form interface #usefirstip # use first ip from auth file for remote netmask 255.255.255.255 # set netmask, 255.255.255.255 is for pointopoint defaultroute # (dont) set default route nohostroute # dont set host route #noproxyarp # (dont) set an proxy arp entry #mru X # set maximum size of recive units to X #default-mru # disable mru negotation mtu 1500 # set maximum size of transmit units to X (1500 is OK) #useifmtu # use mtu from interface #ipparam X # set ip parameters in script X #ms-dns X # dns address for the peers use (dialin only) #ms-wins X # wins address for the peers use (dialin only) ms-get-dns # accept peers suggestion of dns address (dialout) #set_userip # define valid ip addresses in /etc/ppp/useriptab #ipcp-restart X # Set timeout for IPCP #ipcp-max-terminate X # Set max #xmits for term-reqs #ipcp-max-configure X # Set max #xmits for conf-reqs #ipcp-max-failure X # Set max #conf-naks for IPCP #ipcp-accept-local # Accept peer's address for us #ipcp-accept-remote # Accept peer's address for it # IPX NETWORKING #noipx # en/disable ipx #ipx-network X # IPX network number #ipxcp-accept-network # Accept peer netowrk #ipx-node X # IPX node number #ipxcp-accept-local # Accept our address #ipxcp-accept-remote # Accept peer's address #ipx-routing X # IPX routing proto number #ipx-router-name X # IPX router name #ipxcp-restart X # Set timeout for IPXCP #ipxcp-max-terminate X # max #xmits for term-reqs #ipxcp-max-configure X # max #xmits for conf-reqs #ipxcp-max-failure X # max #conf-naks for IPXCP
