-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
On 11.05.2003 20:16, TotoEtLiTiti wrote: | But I can't connect my zaurus to the PC (my PC doesn't see the zaurus... | arrrrgh...).
There is a good HowTo on http://www.ruault.com/Zaurus/ethernet-over-usb-howto.html.
Basicly you must patch the kernel and add the following lines to your /etc/network/interfaces:
iface usb0 inet static ~ address 192.168.129.1 ~ pointopoint 192.168.129.201 ~ netmask 255.255.255.255
If you don't want to recompile your Kernel: I have a prepackaged 2.4.20 Kernel on http://debian.newswriter.org.
And don't forget to install the hotplug package.
If you want to connect to the Internet from your Zaurus I have an additional tipp for you I found somewhere on the Sharp's developer pages:
Just create a file "50zaurus" in the directory "/etc/network/if-up" with the following content:
case $IFACE in ~ usb0) ~ echo 1 > /proc/sys/net/ipv4/ip_forward
~ iptables -t filter -F FORWARD ~ iptables -t filter -P FORWARD DROP ~ iptables -t filter -A FORWARD -s $IF_POINTOPOINT/$IF_NETMASK -j ACCEPT ~ iptables -t filter -A FORWARD -d $IF_POINTOPOINT/$IF_NETMASK -j ACCEPT
~ iptables -t nat -F PREROUTING ~ iptables -t nat -P PREROUTING ACCEPT
~ iptables -t nat -F POSTROUTING ~ iptables -t nat -P POSTROUTING ACCEPT
~ iptables -t nat -F OUTPUT ~ iptables -t nat -P OUTPUT ACCEPT ~ iptables -t nat -A POSTROUTING -s $IF_POINTOPOINT/$IF_NETMASK -o eth0 -j MASQUERADE ~ ;; esac
Make the file executable. Now IP masquerading will be setup correctly every time you connect your Zaurus. Please note that you will have to change eth0 to whatever device you use to connect to the internet.
- -- Philipp Wolfer <[EMAIL PROTECTED]> - --
Diese E-Mail wurde digital mit GnuPG (http://www.gnupg.org) signiert. Mein zugeh�riger �ffentlicher Schl�ssel zur Verifizierung der Unterschrift ist unter http://www.newswriter.org/private/pubkey-ph.wolfer.html verf�gbar.
This e-mail was digitaly signed with GnuPG (http://www.gnupg.org). My public key for verifying the signature is available on http://www.newswriter.org/private/pubkey-ph.wolfer.html -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQE+vrTrXBTpEMolX1URAnZpAJ9zI26d9UwYBDxaGSGg2diVSstJWQCg7YPG RFsPPNPkdRwbNQxSOApgOik= =4TY/ -----END PGP SIGNATURE-----
