I had that same kind of thing with my 715/50 except that the scsi.6 disk (with HP-UX installed on it) was read-only and therefore I couldn't partition it with cfdisk. I could re-install HP-UX any time on it, though. I think I remember that I once had a tape somewhere with diagnostic software that allowed you to boot (the tape) and could then turn off read-only on the disk devices, but it's long gone. If that's not it, I don't have a clue.
----- Original Message ----- From: "Philipp Schulte" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, January 19, 2002 6:56 PM Subject: no disks are detected on a 735/99 > Hello, > I am trying to install parisc-linux 0.9.3 on a HP 735/99. I booted > from CD and the installer told me that now disks were detected. > In the boot console I see the CD-ROM mentioned as something like "P0 > scsi" and the disk as "P1 fwscsi". The disks works fine, HP-UX is > installed and boots. > It looks like Linux doesn't support the fwscsi-controller even though > it should. > Does anyone know this problem and how to solve it? > Thanks a lot, > Phil > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
