Try starting with the source for glide3-alpha. It is the 64-bit branch of the glide sources. I tweaked them to compile ok on Alpha and they shouldn't be hard to fix up for hppa as well.
C On Sat, 24 Aug 2002, Carlos O'Donell wrote: > > > cc -O6 -m486 -fomit-frame-pointer -funroll-loops \ > > > -fexpensive-optimizations -ffast-math -DBIG_OPT -I. \ > > > -I/usr/src/glide-2001.01.26/build-tree/glide2x/swlibs/include \ > > > -I/usr/src/glide-2001.01.26/build-tree/glide2x/cvg/include \ > > > -DENDB -DX11 -Wall -fPIC -DPIC -c -o fx64.o fx64.c > > > > > > cc1: Invalid option `486' > > > > > > > > > My question is, what incantation should I use on hppa to > > > replace the '-O6 -m486 -f...' CFLAGS? > > > > i would suggest just using "-O2" for now.... > > > > randolph > > > > The issues revolves around the fact that the source tree and > assembly for some of pieces you want to build are meant for x86 boxes. > Though from a cusory glance it looks like the .c files are present for > these bits (so you can revert to those). > > Right off the top: > tvg/makefile.linux:CFLAGS = -O -m486 -fomit-frame-pointer $(LCDEFS) $(LCOPTS) > $(LCINC) > glide2x/sst1/init/initvg/makefile.unix:CFLAGS = -O -m486 -fomit-frame-pointer > $(LCDEFS) $(LCOPTS) $(LCINC) > glide2x/swlibs/include/make/3dfx.linux.mak:CNODEBUG = -O6 -m486 > -fomit-frame-pointer -funroll-loops \ > glide2x/swlibs/include/make/3dfx.mak:CNODEBUG = -O6 -m486 > -fomit-frame-pointer -funroll-loops \ > glide2x/swlibs/include/make/3dfx.mak:CNODEBUG = -O6 -m486 > -fomit-frame-pointer -funroll-loops \ > glide2x/swlibs/include/make/makefile.autoconf.bottom:GLIDE_DEBUG_GCFLAGS = > -O6 -m486 > glide3x/swlibs/include/make/3dfx.linux.mak:CNODEBUG = -O6 -m486 > -fomit-frame-pointer -funroll-loops \ > glide3x/swlibs/include/make/3dfx.mak:CNODEBUG = -O6 -m486 > -fomit-frame-pointer -funroll-loops \ > glide3x/swlibs/include/make/3dfx.mak:CNODEBUG = -O6 -m486 > -fomit-frame-pointer -funroll-loops \ > glide3x/swlibs/include/make/makefile.autoconf.bottom:GLIDE_DEBUG_GCFLAGS = > -O6 -m486 > swlibs/include/make/3dfx.linux.mak:CNODEBUG = -O6 -m486 > -fomit-frame-pointer -funroll-loops \ > swlibs/include/make/3dfx.mak:CNODEBUG = -O6 -m486 -fomit-frame-pointer > -funroll-loops \ > swlibs/include/make/3dfx.mak:CNODEBUG = -O6 -m486 -fomit-frame-pointer > -funroll-loops \ > swlibs/include/make/makefile.autoconf.bottom:GLIDE_DEBUG_GCFLAGS = -O6 -m486 > > These files will give you some grief and need to be changed; remove the -m486 > bit. > You either need to produce .dpatch's for the deb to use or stop building > the deb and do it by hand with the upstream source. > > You've got me all excited about seeing this work :) I have a Vodoo1 > (Monster3D) > PCI card that I might be tempted to ressurect. > > Hope this helps. Sorry about there not being a _magic_ switch :) > > c. > > _______________________________________________ > parisc-linux mailing list > [EMAIL PROTECTED] > http://lists.parisc-linux.org/mailman/listinfo/parisc-linux > >
