|
Hi there
Here’s the log I got when trying to install Debian Net installation on HP 9000/800 K360
You’ll see there’s a console configured as “Linux” but, I already tested with vt100, vt102 and so on.
No idea about why when the installation cd wants to check the keyboard / mouse settings dumps me the errors you can see.
Any ideas?
Thanks a lot.
-------------------------------------------------------------------------------- |
Firmware Version 39.12 Duplex Console IO Dependent Code (IODC) revision 4
------------------------------------------------------------------------------
(c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State CoProcessor State Cache Size
--------- -------- --------------------- ----------------- ----------
0 180 MHz Active Functional 1 MB
Central Bus Speed (in MHz) : 120
Available Memory : 786432 KB
Good Memory Required : 80360 KB
Primary boot path: 10/0.5 (dec)
Alternate boot path: 10/12/5.2 (dec)
Console path: 10/4/0.0 (dec)
Keyboard path: 10/12/7.0 (dec)
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
Boot terminated.
---- Main Menu ---------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
----
Main Menu: Enter command or menu > BO ALT
Interact with IPL (Y, N, or Cancel)?> y
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
palo ipl 1.0 [EMAIL PROTECTED] Mon Apr 1 10:02:53 MST 2002
Boot image contains:
0/vmlinux32 3985393 bytes @ 0x458800
0/vmlinux64 5279419 bytes @ 0x825800
0/ramdisk 2669522 bytes @ 0xd2e800
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).Current
command line:
0/vmlinux ramdisk_size=8192 root=/dev/ram initrd=0/ramdisk console=ttyS0
TERM=vt102
0: 0/vmlinux
1: ramdisk_size=8192
2: root=/dev/ram
3: initrd=0/ramdisk
4: console=ttyS0
5: TERM=vt102
Edit which field?
(or 'b' to boot with this command line)? 5
TERM=Linux
Current command line:
0/vmlinux ramdisk_size=8192 root=/dev/ram initrd=0/ramdisk console=ttyS0
TERM=Linux
0: 0/vmlinux
1: ramdisk_size=8192
2: root=/dev/ram
3: initrd=0/ramdisk
4: console=ttyS0
5: TERM=Linux
Edit which field?
(or 'b' to boot with this command line)? b
Command line for kernel: 'ramdisk_size=8192 root=/dev/ram console=ttyS0
TERM=Linux palo_kernel=0/vmlinux'
Selected kernel: /vmlinux from partition 0
Selected ramdisk: /ramdisk from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing...
This box can boot either 32 or 64-bit kernels...Both kernels available,
choosing 32-bit kernelELF32 executable
Entry 001000c8 first 00100000 n 6
Segment 0 load 00100000 size 2203644 mediaptr 0x1000
Segment 1 load 0031a000 size 468136 mediaptr 0x21b000
Segment 2 load 00390000 size 257356 mediaptr 0x28e000
Segment 3 load 003d0000 size 8192 mediaptr 0x2cd000
Segment 4 load 003d8000 size 32768 mediaptr 0x2cf000
Segment 5 load 004020e4 size 112288 mediaptr 0x2d70e4
Loading ramdisk 2669522 bytes @ 2fd61000...
Branching to kernel entry point 0x001000c8. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.4.20-32 ([EMAIL PROTECTED]) (gcc version 3.0.4) #1 Sun Feb 23
18:23:10 CET 2003
FP[0] enabled: Rev 0 Model 14
The 32-bit Kernel has started...
Determining PDC firmware type: System Map.
model 00005900 00000491 00000000 00000002 41a9558a 100000f1 00000008 000000b2
000000b2
vers 00000301
CPUID vers 14 rev 11 (0x000001cb)
capabilities 0x3
model 9000/800/K360
Total Memory: 767 Mb
initrd: 3fd61000-3ffecbd2
initrd: reserving 2fd61000-2ffecbd2 (mem_max 2fffe000)
pagetable_init
On node 0 totalpages: 196606
zone(0): 196606 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ramdisk_size=8192 root=/dev/ram console=ttyS0 TERM=Linux
palo_kernel=0/vmlinux
Console: colour dummy device 160x64
Calibrating delay loop... 359.62 BogoMIPS
Memory: 771272k available
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Searching for devices...
Found devices:
1. U2-IOA BC Runway Port (12) at 0xfff88000 [8], versions 0x580, 0xf, 0xb
2. U2-IOA BC GSC+ Port (7) at 0xf103f000 [8/63], versions 0x501, 0x1, 0xc
3. U2-IOA BC Runway Port (12) at 0xfff8a000 [10], versions 0x580, 0xf, 0xb
4. Mohawk Core FW-SCSI (4) at 0xf1800000 [10/0], versions 0x44, 0x0, 0x89
5. Gecko BOA BC GSC+ Port (7) at 0xf1804000 [10/4], versions 0x500, 0x0, 0xc
6. Sahp Baat Kiuh AP/MUX (5) at 0xf1900000 [10/4/0], versions 0x44, 0x0, 0xd
7. Wizard SCSI (4) at 0xf1904000 [10/4/4], versions 0x4, 0x0, 0x3b
8. Wizard SCSI (4) at 0xf190c000 [10/4/12], versions 0x4, 0x0, 0x3b
9. Gecko BOA BC HP-PB Port (7) at 0xf193c000 [10/4/60], versions 0x103, 0x0, 0xc
10. HP HSC-PCI Cards (4) at 0xf1808000 [10/8], versions 0x4, 0x0, 0x9d
11. Mohawk Core BA (11) at 0xffd00000 [10/12], versions 0x44, 0x0, 0x81,
additional addresses: 0xffd0c000 0xffc00000
12. Mohawk Core Centronics (10) at 0xffd02000 [10/12/0], versions 0x44, 0x0,
0x74, additional addresses: 0xffd01000 0xffd03000
13. Mohawk Core SCSI (10) at 0xffd06000 [10/12/5], versions 0x44, 0x0, 0x82
14. Mohawk Core LAN (802.3) (10) at 0xffd07000 [10/12/6], versions 0x44, 0x0,
0x8a
15. Mohawk Core PS/2 Port (10) at 0xffd08000 [10/12/7], versions 0x44, 0x0, 0x84
16. Mohawk Core PS/2 Port (10) at 0xffd08100 [10/12/8], versions 0x44, 0x0, 0x84
17. U2-IOA BC GSC+ Port (7) at 0xf183f000 [10/63], versions 0x501, 0x1, 0xc
18. Mohawk 180 U 1M DC3 (K460) (0) at 0xfffa0000 [32], versions 0x590, 0x0, 0x4
19. Memory (1) at 0xfffb1000 [49], versions 0x32, 0x0, 0x9
CPU(s): 1 x PA8000 (PCX-U) at 180.000000 MHz
Found U2 at 0xfff88000
Found U2 at 0xfff8a000
Lasi version 0 at 0xffd00000 found.
LED display at ffd0c000 registered
Dino version 3.x (card mode) found at 0xf1808000
Dino: Failed to allocate memory region
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Soft power switch support not available.
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
parport_init_chip: initialize bidirectional-mode.
parport0: PC-style at 0xffd02800, irq 88 [PCSPP,TRISTATE]
STI GSC/PCI graphics driver version 0.9
pty: 256 Unix98 ptys configured
PDC Software Console version 0.3 (2001-11-17), [EMAIL PROTECTED]
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
FLT CBFB
Stack Dump:
10c64780: 103e7010 318d70e3 58ce43d7 98c6b871
10c64770: ac6721eb 1011db14 103f165c 0000000f
10c64760: 103e6e60 1032d810 1032db68 0000000f
10c64750: 1032d810 fffff154 00000000 00000006
10c64740: 103f8810 cb39ea5a cd50a969 65a7af84
10c64730: e6930e1d 101cfe88 00000001 0000000f
Kernel addresses on the stack:
[<1011db14>] [<101cfe88>] [<10122e1c>] [<1011e194>]
[<101d5310>] [<1010023c>] [<10108c4c>] [<10108cf4>]
[<1011d990>] [<10162fd4>] [<1011db14>] [<10163590>]
[<1011de84>] [<101637dc>] [<1010022c>] [<1011dd58>]
[<101215a8>]
High Priority Machine Check (HPMC): Code=1 regs=1031d080 (Addr=00000000)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001100000000000001100 Not tainted
r00-03 00000000 1032a010 101109a0 000000ff
r04-07 00000008 103f7010 00000013 00000000
r08-11 10340c84 1032dbac 10000080 1032d810
r12-15 000000f2 000000fa f0140000 00000007
r16-19 f0001790 f0000124 f000011c f180806c
r20-23 0000000e 0000000f 10270730 00000000
r24-27 00000004 00000000 10422160 1031a010
r28-31 00000000 0000002f 10c64780 101109a0
sr0-3 00000000 00000000 00000000 00000000
sr4-7 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 1027075c 10270760
IIR: 00141860 ISR: 9227ffc6 IOR: 02008064
CPU: 0 CR30: 10c64000 CR31: 103d8000
ORIG_R28: 00000000
