Hello all, I just get an old d380 2-way 256Mb ram (from with I removed a broken remote management card and duno if supported)
It's a good oportunity to test sarge d-i (netinstall cd) :-) unfortunately it failled to boot on a well known ramdisk pb:"attempt to access beyond end of device" ... LED display at ffd0c000 registered Wax at 0xffe00000 found. Wax EISA Adapter found at 0xfc000000 EISA EEPROM: cannot register misc device. Enumerating EISA bus EISA: Probing bus 0 at parisc8:20:5 EISA: Mainboard HWPC051 detected. EISA: Detected 0 cards. SCSI subsystem initialized TC classifier action (bugs to [email protected] cc [EMAIL PROTECTED]) STI GSC/PCI core graphics driver Version 0.9a unwind_init: start = 0x10325720, end = 0x103468a0, entries = 8472 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 Initializing Cryptographic API Soft power switch enabled, polling @ 0xf0140000. Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 25 ports, IRQ sharing enabled ttyS0 at MMIO 0xffd05800 (irq = 90) is a 16550A ttyS1 at MMIO 0xffe02800 (irq = 121) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize mice: PS/2 mouse device common for all mice serio: GSC PS2 keyboard port at 0xffd08000 irq 69 @ parisc8:16:7 serio: GSC PS2 mouse port at 0xffd08100 irq 69 @ parisc8:16:8 HP SDC: No SDC found. HP SDC MLC: Registering the System Domain Controller's HIL MLC. HP SDC MLC: Request for raw HIL ISR hook denied NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) RAMDISK: Compressed image found at block 0 RAMDISK: incomplete write (-28 != 32768) 16777216 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 316k freed Setting up filesystem, please wait ... attempt to access beyond end of device ram0: rw=0, want=40650, limit=32768 attempt to access beyond end of device ram0: rw=0, want=40650, limit=32768 attempt to access beyond end of device ram0: rw=0, want=32772, limit=32768 attempt to access beyond end of device ram0: rw=0, want=32772, limit=32768 cp: Read error: Inpuattempt to access beyond end of device [EMAIL PROTECTED]:/tmp$ [EMAIL PROTECTED]:/tmp$ cp screen-exchange /home/jso/d380-sarge-cdFailure.doc [EMAIL PROTECTED]:/tmp$ more /home/jso/d380-sarge-cdFailure.doc LED display at ffd0c000 registered Wax at 0xffe00000 found. Wax EISA Adapter found at 0xfc000000 EISA EEPROM: cannot register misc device. Enumerating EISA bus EISA: Probing bus 0 at parisc8:20:5 EISA: Mainboard HWPC051 detected. EISA: Detected 0 cards. SCSI subsystem initialized TC classifier action (bugs to [email protected] cc [EMAIL PROTECTED]) STI GSC/PCI core graphics driver Version 0.9a unwind_init: start = 0x10325720, end = 0x103468a0, entries = 8472 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 Initializing Cryptographic API Soft power switch enabled, polling @ 0xf0140000. Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 25 ports, IRQ sharing enabled ttyS0 at MMIO 0xffd05800 (irq = 90) is a 16550A ttyS1 at MMIO 0xffe02800 (irq = 121) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize mice: PS/2 mouse device common for all mice serio: GSC PS2 keyboard port at 0xffd08000 irq 69 @ parisc8:16:7 serio: GSC PS2 mouse port at 0xffd08100 irq 69 @ parisc8:16:8 HP SDC: No SDC found. HP SDC MLC: Registering the System Domain Controller's HIL MLC. HP SDC MLC: Request for raw HIL ISR hook denied NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) RAMDISK: Compressed image found at block 0 RAMDISK: incomplete write (-28 != 32768) 16777216 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 316k freed Setting up filesystem, please wait ... attempt to access beyond end of device ram0: rw=0, want=40650, limit=32768 attempt to access beyond end of device ram0: rw=0, want=40650, limit=32768 attempt to access beyond end of device ram0: rw=0, want=32772, limit=32768 attempt to access beyond end of device ram0: rw=0, want=32772, limit=32768 cp: Read error: Inpuattempt to access beyond end of device t/output error ram0: rw=0, want=33388, limit=32768 cp: Read error: Inpuattempt to access beyond end of device t/output error ram0: rw=0, want=33420, limit=32768 cp: Read error: Inpuattempt to access beyond end of device t/output error ram0: rw=0, want=33704, limit=32768 cp: Read error: Inpuattempt to access beyond end of device t/output error ram0: rw=0, want=33756, limit=32768 cp: attempt to access beyond end of device Read error: Inpuram0: rw=0, want=33790, limit=32768 t/output error attempt to access beyond end of device cp: Read error: ram0: rw=0, want=33798, limit=32768 Input/output errattempt to access beyond end of device or cp: Read errram0: rw=0, want=33846, limit=32768 or: Input/outputattempt to access beyond end of device error cp: Readram0: rw=0, want=33864, limit=32768 error: Input/ouattempt to access beyond end of device tput error cp: ram0: rw=0, want=33930, limit=32768 Read error: Inpuattempt to access beyond end of device t/output error ram0: rw=0, want=33954, limit=32768 cp: Read error: attempt to access beyond end of device Input/output errram0: rw=0, want=33986, limit=32768 or cp: Read errattempt to access beyond end of device or: Input/outputram0: rw=0, want=34066, limit=32768 error cp: Readattempt to access beyond end of device error: Input/ouram0: rw=0, want=34084, limit=32768 tput error cp: attempt to access beyond end of device Read error: Inpuram0: rw=0, want=34518, limit=32768 t/output error attempt to access beyond end of device cp: Read error: ram0: rw=0, want=34542, limit=32768 Input/output errattempt to access beyond end of device or cp: Read errram0: rw=0, want=34676, limit=32768 or: Input/outputattempt to access beyond end of device error cp: Readram0: rw=0, want=34696, limit=32768 error: Input/ouattempt to access beyond end of device tput error cp: ram0: rw=0, want=34738, limit=32768 Read error: Inpuattempt to access beyond end of device t/output error ram0: rw=0, want=34944, limit=32768 cp: Read error: attempt to access beyond end of device Input/output errram0: rw=0, want=34944, limit=32768 or cp: Read errattempt to access beyond end of device or: Input/outputram0: rw=0, want=34946, limit=32768 error attempt to access beyond end of device ram0: rw=0, want=34946, limit=32768 attempt to access beyond end of device ram0: rw=0, want=34954, limit=32768 cp: Read error: Inpuattempt to access beyond end of device t/output error ram0: rw=0, want=35108, limit=32768 cp: Read error: Inpuattempt to access beyond end of device t/output error ram0: rw=0, want=35344, limit=32768 attempt to access beyond end of device ram0: rw=0, want=35344, limit=32768 attempt to access beyond end of device ram0: rw=0, want=35346, limit=32768 attempt to access beyond end of device ram0: rw=0, want=35346, limit=32768 attempt to access beyond end of device ram0: rw=0, want=35590, limit=32768 attempt to access beyond end of device ram0: rw=0, want=35590, limit=32768 attempt to access beyond end of device ram0: rw=0, want=35592, limit=32768 attempt to access beyond end of device ram0: rw=0, want=35592, limit=32768 attempt to access beyond end of device ram0: rw=0, want=35596, limit=32768 attempt to access beyond end of device ram0: rw=0, want=35596, limit=32768 attempt to access beyond end of device ram0: rw=0, want=40300, limit=32768 cp: Read error: Inpuattempt to access beyond end of device t/output error ram0: rw=0, want=40302, limit=32768 attempt to access beyond end of device ram0: rw=0, want=40302, limit=32768 attempt to access beyond end of device ram0: rw=0, want=40316, limit=32768 cp: attempt to access beyond end of device Read error: Inpuram0: rw=0, want=40408, limit=32768 t/output error attempt to access beyond end of device cp: Read error: ram0: rw=0, want=40410, limit=32768 Input/output errattempt to access beyond end of device or ram0: rw=0, want=40410, limit=32768 attempt to access beyond end of device ram0: rw=0, want=40418, limit=32768 cp: Read error: Input/output error attempt to access beyond end of device ram0: rw=0, want=40426, limit=32768 cp: Read error: Input/output error request_module: runaway loop modprobe net-pf-1 modprobe: FATAL: Could not open '/lib/modules/2.6.8-2-32/kernel/net/unix/unix.ky modprobe: FATAL: Could not open '/lib/modules/2.6.8-2-32/kernel/net/unix/unix.ky modprobe: FATAL: Could not open '/lib/modules/2.6.8-2-32/kernel/net/unix/unix.ky ... Any suggestion how to change lifimage, initrd.img, ... to test more this install cd. Thanks, Joel Oth I used a external bootable (unstable debian install) disk and boot with a recent kernel 2.6.12-rc2-pa0 :-)
