Hello Erik,
Do you have the oportunity to test latest Kyle kernel image: <http://lists.parisc-linux.org/pipermail/parisc-linux/2005-March/026182.html>
(having no info on the cd you installed, it could be a bit more recent)
Hth, Joel
Erik Heckers wrote:
Hello!
Just dared to upgrade the firmware of my C3000 from 3.4 to 5.0 The firmware upgrade went fine (using a HP-UX 10.20 patch depot).
But the error is still the same, after installing debian using sarge-hppa-netinst.iso and rebooting I get: ... sym0: <896> rev 0x4 at pci 0000:00:0f.0 irq 65 sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking --- machine freezes --- (e.g. pressing the soft-power-button doesn't reset the machine) Normally the next line is sym0: SCSI BUS has been reset.
Any ideas what to try next, e.g. are there any kernel parameters I can try to set? (on i386 architecture I would try the various acpi=off, apm=off, splash=off 'failsafe' parameters ...)
Erik
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
