Hello Lee,
J. L. Lee wrote:
Hi,
If you are interested, followiong are some test results I carried out
while trying to bring up an ATI 3D Rage II+ video card on my B2000 which
runs on Linux kernel 2.6.12-rc6-pa1.
The video card outputs from 'lspci -v' are:
0000:01:01.0 VGA compatible controller: ATI Technologies Inc 3D Rage II+
215GTB [Mach64 GTB] (rev 9a) (prog-if 00 [VGA])
Flags: bus master, stepping, medium devsel, latency 255
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at 12000 [size=256]
Memory at f4800000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f4820000 [disabled] [size=128K]
Iirc for such ATI 3D Rage on a non-i386 platform you would have to select:
CONFIG_FB_ATY_XL_INIT: (sic "to support booting a Rage XL without BIOS
support.")
i.e. something like in your make menuconfig:
<M> ATI Mach64 display support
[*] Mach64 CT/VT/GT/LT (incl. 3D RAGE) support
[ ] Mach64 generic LCD support (EXPERIMENTAL) (NEW)
[*] Rage XL No-BIOS Init support
Hth,
Joel
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
