Sounds like this is a great opportunity for you to dig into the scsi driver code! ;-)
But, you'd said that you're using 5 disks; have you tried the scsi disk with <5 disks total? That is, have you checked to ensure that the scsi problem is not related to the fact that you're using 5 disks? (I do know you had no problems with 5 IDE disks.) later, ali [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote -- > >> From: Marcus Brinkmann <[EMAIL PROTECTED]> > >> The scsi and all other block device drivers in gnumach are taken > straight > >> from linux, with very little changes in some cases. > >> > >> In most cases you can just plug the linux source file in the appropriate > >> directory and do some changes to the source and expect it to work. > > Well, in that case, I expect I need a source package so I can do some > playing around meself ! > > Latest, is my own chicken scratches of the sequence of error... > > Sometime after probing parallel ports, and such, after the failed WD-7000, > I get... > > scsi: AdvanSys SCSI 3.1E PCI Ultra 16 CDB: IO FCC0/F, IRQ 9 > scsi: 1 host > scsi: aborting command due to timeout: pid 0, scsi 0, channel 0, id 0, LUN > 0, 0x 00 00 00 00 00 00 > Also having some problems accessing partitions on other drives while
