Jochen <[EMAIL PROTECTED]> writes: > Hi there, > > I have a VIA Rhine on board LAN chip, that doesn't work. I found, that > the driver for this chip may not work and that the OSkit may help > solving the problem.
No, I think it should work. The hardware is supported on GNUMach 1.3. > While booting the hurd, I get following message: > > eth0: D-Link DE-600 pocket adapter: not at I/O 0x378 > D-Link DE-620 pocket adapter not identified in the printer port > 0 3c515 cards found > > I'm not sure, if it's the problem of the driver or of the BIOS > setting. GNUMach doesn't support shared IRQs, perhaps that is the problem. Can you have a look at this? > So, how can I get the network device work? If it isn't shared IRQs build GNUMach 1.3 yourself (Or GNUMach 1.9, but personally I prefer 1.3 and it is easier to build). Use the configure options: --enable-ide --enable-floppy --enable-viarhine (Unless you don't want floppydrive support, in that case just don't include that option :)) Thanks, Marco
