Crosshurd via Debian GNU/Linux-Sid
1^st boot yields;
Start /hurd/ext2fs.static: Hurd server bootstrap: ext2fs.static
[device:hd1s1]
exec init proc auth/libexec/console-run: /dev/console: No such file or
directory
/libexec/console-run: /tmp/console: Read-only filesystem
/libexec/console-run: /hurd/term: Read-only filesystem
/libexec/console-run: Using temporary console /tmp
/libexec/runsystem: Running on fallback console /tmp
sh-3.1#export TERM=mach
sh-3.1#./native-install
sh: Start-pipeline: pgrp pipe: Protocol family not supported
Killed
sh-3.1#
sh-3.1#reboot
sh: Start-pipeline: pgrp pipe: Protocol family not supported
Killed
sh-3.1#exit
/hurd/init: /libexec/runsystem: exited with status 137
/libexec/console-run: /tmp/console: Read-only filesystem
/libexec/console-run: /hurd/term: Read-only filesystem
/libexec/console-run: Using temporary console /tmp
/libexec/runsystem: Running on fallback console /tmp
/libexec/console-run: /tmp: Device or resource busy
/libexec/console-run: /tmp/console: Read-only filesystem
/libexec/console-run: Using temporary console /tmp
/libexec/runsystem: Running on fallback console /tmp
Freezes, have to Hard Boot. Can never get further then this.
Teague MacRoot wrote:
Fair enough, took a bit of time to re try the three methods. I had
thought that I had reached the same ending point, but I couldna
reproduce said results. So I shall post three follow-up replyes with
what each method yielded, Crosshurd-via Debian GNU/Linux-Sid, Debian
GNU/Hurd CD's & GNU-Hurd.tar-ball.
Thanks for responding.
Cheers
Michael Banck wrote:
On Sun, Jun 24, 2007 at 06:00:40PM -0400, Teague MacRoot wrote:
All three methods seem to crap out when trying to run
"./native-install" for the second time.
If you want more help than `your hardware might not be supported' I
suggest to report the error messages/screen output you see when
native-install `craps out'.
Michael
