Hi, I'm wondering if this issue may be related to the remark Dann Frazier made on December 9th:
"klibc is buggy on ia64, so avoid initramfs-tools for now. Use yaird instead." (cf. http://lists.debian.org/debian-ia64/2005/12/msg00011.html) Is klibc still buggy on ia64? Should we use initrd images built with yaird at present time? I'm asking this because Debian Installer still creates initramfs images and a fresh install of Debian Etch is thus unbootable. Émeric Le lundi 06 mars 2006 à 20:30 +0100, Émeric Maschino a écrit : > Hi, > > Is there currently a problem with initramfs image? The generated initramfs > image > (by the debian-installer or during kernel image update) triggers a > segmentation > fault on my hp workstation zx6000 at startup and I'm left in a BusyBox > environment (complete trace recorded on a serial console at the end of this > post). This is with up-to-date Debian Etch. As a workaround, I must create an > initrd image either using mkinitrd from the initrd-tools package or using > mkinitrd.yaird from the yaird package. > > Cheers, > > Émeric > > ELILO boot: Linux > Uncompressing Linux... done > Loading file \EFI\debian\initrd.img...done > Linux version 2.6.15-1-mckinley-smp (Debian 2.6.15-7) ([EMAIL PROTECTED]) > (gcc ve > rsion 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 SMP Wed Feb 22 > 16:20:54 C > ST 2006 > EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 > HCDP > =0x3fb2c000 > booting generic kernel on platform hpzx1 > PCDP: v0 at 0x3fb2c000 > Explicit "console="; ignoring PCDP > Initial ramdisk at: 0xe0000040fe72c000 (8819836 bytes) > SAL 3.1: HP version 2.31 > SAL Platform features: None > SAL: AP wakeup using external interrupt vector 0xff > No logical to physical processor mapping available > ACPI: Local APIC address c0000000fee00000 > GSI 36 (level, low) -> CPU 0 (0x0000) vector 48 > 2 CPUs available, 2 CPUs total > MCA related initialization done > Virtual mem_map starts at 0xa0007fffc7200000 > Built 1 zonelists > Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/vmlinuz root=/dev/sda2 ro > cons > ole=ttyS0,9600n8 > PID hash table entries: 4096 (order: 12, 131072 bytes) > Console: colour VGA+ 80x25 > Memory: 6217472k/6248192k available (4579k code, 46464k reserved, 1943k data, > 33 > 6k init) > McKinley Errata 9 workaround not needed; disabling it > Security Framework v1.0.0 initialized > SELinux: Disabled at boot. > Capability LSM initialized > Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes) > Mount-cache hash table entries: 1024 > Boot processor id 0x0/0x0 > CPU 1: synchronized ITC with CPU 0 (last diff -20 cycles, maxerr 580 cycles) > Brought up 2 CPUs > Total of 2 processors activated (3891.20 BogoMIPS). > checking if image is initramfs... it is > Freeing initrd memory: 8608kB freed > NET: Registered protocol family 16 > ACPI: bus type pci registered > ACPI: Subsystem revision 20050902 > ACPI: Interpreter enabled > ACPI: Using IOSAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > ACPI: PCI Root Bridge [PCI1] (0000:20) > ACPI: PCI Root Bridge [PCI2] (0000:40) > ACPI: PCI Root Bridge [PCI3] (0000:60) > ACPI: PCI Root Bridge [PCI4] (0000:80) > ACPI: PCI Root Bridge [PCI6] (0000:c0) > IOC: reserving 512Mb of IOVA space at 0x60000000 for agpgart > IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000 > perfmon: version 2.0 IRQ 238 > perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits) > PAL Information Facility v0.5 > perfmon: added sampling format default_format > perfmon_default_smpl: default_format v2.0 registered > audit: initializing netlink socket (disabled) > audit(1141673603.032:1): initialized > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered > EFI Time Services Driver v0.4 > i8042.c: No controller found. > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > GSI 34 (edge, high) -> CPU 0 (0x0000) vector 49 > serial8250: ttyS0 at MMIO 0xff5e0000 (irq = 49) is a 16550A > GSI 35 (edge, high) -> CPU 1 (0x0100) vector 50 > serial8250: ttyS1 at MMIO 0xff5e2000 (irq = 50) is a 16550A > RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize > mice: PS/2 mouse device common for all mice > NET: Registered protocol family 2 > IP route cache hash table entries: 262144 (order: 7, 2097152 bytes) > TCP established hash table entries: 1048576 (order: 10, 16777216 bytes) > TCP bind hash table entries: 65536 (order: 6, 1048576 bytes) > TCP: Hash tables configured (established 1048576 bind 65536) > TCP reno registered > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Freeing unused kernel memory: 336kB freed > Loading, please wait... > Begin: Loading essential drivers... ... > Done. > Begin: Running /ACPI: Thermal Zone [THM0] (27 C) > scripts/init-premount ... > eval: 1: array_udev-helper=udev: not found > eval: 1: array_udev-helper=: not found > usbcore: registered new driver usbfs > usbcore: registered new driver hub > tg3.c:v3.47 (Dec 28, 2005) > GSI 29 (level, low) -> CPU 0 (0x0000) vector 51 > ACPI: PCI Interrupt 0000:20:02.0[A] -> GSI 29 (level, low) -> IRQ 51 > eth0: Tigon3 [partno(BCM95700A6) rev 0105 PHY(5701)] (PCI:66MHz:64-bit) > 10/100/1 > 000BaseT Ethernet 00:30:6e:4a:d2:bd > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0] > eth0: dma_rwctrl[76ff2d0f] > SCSI subsystem initialized > GSI 16 (level, low) -> CPU 1 (0x0100) vector 52 > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 52 > ohci_hcd 0000:00:01.0: OHCI Host Controller > ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 1 > ohci_hcd 0000:00:01.0: irq 52, io mem 0x80023000 > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 3 ports detected > Fusion MPT base driver 3.03.04 > Copyright (c) 1999-2005 LSI Logic Corporation > e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI > e100: Copyright(c) 1999-2005 Intel Corporation > Fusion MPT SPI Host driver 3.03.04 > GSI 17 (level, low) -> CPU 0 (0x0000) vector 53 > ACPI: PCI Interrupt 0000:00:01.1[B] -> GSI 17 (level, low) -> IRQ 53 > ohci_hcd 0000:00:01.1: OHCI Host Controller > ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:01.1: irq 53, io mem 0x80022000 > usb 1-1: new low speed USB device using ohci_hcd and address 2 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > GSI 18 (level, low) -> CPU 1 (0x0100) vector 54 > ACPI: PCI Interrupt 0000:00:01.2[C] -> GSI 18 (level, low) -> IRQ 54 > ehci_hcd 0000:00:01.2: EHCI Host Controller > ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 3 > ehci_hcd 0000:00:01.2: irq 54, io mem 0x80021000 > ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 > usbcore: registered new driver hiddev > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 5 ports detected > GSI 20 (level, low) -> CPU 0 (0x0000) vector 55 > ACPI: PCI Interrupt 0000:00:03.0[A] -> <6>CMD649: IDE controller at PCI slot > 000 > 0:00:02.0 > GSI 21 (level, low) -> CPU 1 (0x0100) vector 56 > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 21 (level, low) -> IRQ 56 > CMD649: chipset revision 2 > CMD649: 100% native mode on irq 56 > ide0: BM-DMA at 0x0d40-0x0d47, BIOS settings: hda:pio, hdb:pio > ide1: BM-DMA at 0x0d48-0x0d4f, BIOS settings: hdc:pio, hdd:pio > hda: DV-28E-B, ATAPI CD/DVD-ROM drive > GSI 20 (level, low) -> IRQ 55 > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > e100: eth1: e100_probe: addr 0x80020000, irq 55, MAC addr 00:30:6E:4A:D3:AB > usb 1-1: USB disconnect, address 2 > ide0 at 0xd58-0xd5f,0xd66 on irq 56 > usb 1-1: new low speed USB device using ohci_hcd and address 3 > GSI 27 (level, low) -> CPU 0 (0x0000) vector 57 > ACPI: PCI Interrupt 0000:20:01.0[A] -> GSI 27 (level, low) -> IRQ 57 > mptbase: Initiating ioc0 bringup > input: Microsoft Microsoft Wheel Mouse Optical® as /class/input/input0 > input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on > usb-000 > 0:00:01.0-1 > ioc0: 53C1030: Capabilities={Initiator,Target} > usb 2-1: new low speed USB device using ohci_hcd and address 3 > input: CHICONY HP Basic USB Keyboard as /class/input/input1 > input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on > usb-0000:00:01. > 1-1 > usb 2-2: new full speed USB device using ohci_hcd and address 4 > scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=57 > Vendor: HP 73.4G Model: ST373453LC Rev: HPC7 > Type: Direct-Access ANSI SCSI revision: 03 > Vendor: HP 73.4G Model: ST3<6>hub 2-2:1.0: USB hub found > 7<6>hub 2-2:1.0: 3 ports detected > 3453LC Rev: HPC7 > Type: Direct-Access ANSI SCSI revision: 03 > GSI 28 (level, low) -> CPU 1 (0x0100) vector 58 > ACPI: PCI Interrupt 0000:20:01.1[B] -> GSI 28 (level, low) -> IRQ 58 > mptbase: Initiating ioc1 bringup > ioc1: 53C1030: Capabilities={Initiator,Target} > scsi1 : ioc1: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=58 > SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB) > SCSI device sda: drive cache: write through > SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB) > SCSI device sda: drive cache: write through > sda: sda1 sda2 sda3 > sd 0:0:0:0: Attached scsi disk sda > SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB) > SCSI device sdb: drive cache: write through > SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB) > SCSI device sdb: drive cache: write through > sdb: sdb1 sdb2 > sd 0:0:1:0: Attached scsi disk sdb > hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > Done. > Begin: Mounting root file system... ... > Begin: Running /scripts/local-top ... > Done. > Segmentation fault > Begin: Running /scripts/local-premount ... > Done. > Usage: modprobe [-v] [-V] [-C config-file] [-n] [-i] [-q] [-b] [-o <modname>] > <m > odname> [parameters...] > modprobe -r [-n] [-i] [-v] <modulename> ... > modprobe -l -t <dirname> [ -a <modulename> ...] > mount: > Cannot read /etc/fstab: No such file or directory > Begin: Running /scripts/log-bottom ... > Done. > Done. > Begin: Running /scripts/init-bottom ... > mount: Mounting /root/dev on /dev/.static/dev failed: No such file or > directory > Done. > mount: Mounting /sys on /root/sys failed: No such file or directory > mount: Mounting /proc on /root/proc failed: No such file or directory > Target filesystem doesn't have /sbin/init > > > BusyBox v1.01 (Debian 1:1.01-4) Built-in shell (ash) > Enter 'help' for a list of built-in commands. > > /bin/sh: can't access tty; job control turned off > / # > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
