On Fri, May 26, 2006 at 10:00:15PM +0200, De Leeuw Guy wrote: > Hello Dan, > > Thanks for your help > I build my own kernel and just change : > nova:~# diff /boot/config-2.6.16-1-mckinley-smp /boot/config-2.6.16-guy > 3,4c3,4 > < # Linux kernel version: 2.6.16 > < # Thu May 4 13:04:43 2006 > --- > > # Linux kernel version: 2.6.16-guy > > # Fri May 26 14:14:26 2006 > 1041c1041,1047 > < # CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set > --- > > CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y > > # CONFIG_SCSI_QLA21XX is not set > > CONFIG_SCSI_QLA22XX=m > > CONFIG_SCSI_QLA2300=m > > CONFIG_SCSI_QLA2322=m > > # CONFIG_SCSI_QLA6312 is not set > > # CONFIG_SCSI_QLA24XX is not set > > I download the firmware from qlogic web site > And I can boot, mount my FC disks :-). > The problem now is that the next boot change the driver order (one time > megaraid first, another time qla2300 first) it is possible to force > megaraid first ?
You can try adding megaraid to /etc/mkinitramfs/modules - maybe that will cause it to be loaded first? You could also modify your /etc/fstab and /etc/elilo.conf files to permit this other order. Or, if you want to avoid issues like this altogether, you can try using the udev /dev/disk/by-* names, which should provide a static mapping that's not affected by driver load order. -- dann frazier -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
