I use radvd 0.6.2 ......
the machine with kernel 2.4.1+usagi:
alh-ipv6:/etc/radvd# ifconfig
eth0 Link encap:Ethernet HWaddr 00:D0:B7:3F:16:EA
inet addr:192.168.1.182 Bcast:192.168.255.255 Mask:255.255.0.0
inet6 addr: fe80::2d0:b7ff:fe3f:16ea/10 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:66702 errors:0 dropped:0 overruns:0 frame:3
TX packets:18258 errors:0 dropped:0 overruns:0 carrier:0
collisions:1258 txqueuelen:100
Interrupt:10 Base address:0x2000
alh-ipv6:/etc/radvd# cat /etc/radvd/radvd.conf
interface eth0 {
AdvSendAdvert on;
# prefix 5f15:9100:c2dd:1400:8000::0/80
prefix 5f15:9100:c2dd:1400::0/64
{
AdvOnLink on;
AdvAutonomous on;
};
};
-----Mensaje original-----
De: Yuji Sekiya [mailto:[EMAIL PROTECTED]]
Enviado el: mi�rcoles, 07 de febrero de 2001 19:35
Para: Javier Castillo Alcibar
CC: [email protected]; [EMAIL PROTECTED]
Asunto: Re: (usagi-core 01715) Fw: RE: Bind 9.1 + kernel 2.4.1 +
debian-s table
At Wed, 7 Feb 2001 19:36:14 +0100 ,
Javier Castillo Alcibar <[EMAIL PROTECTED]> wrote:
> ������� I am running radvd to advertise a prefix and I have this experience:
>
> ������� - with a kernel 2.2(no USAGI patch), the interface eth0 learns the Adv Prefix (Scope: Site)
> ������� - with a kernel 2.4.1(plus USAGI patch), the interface does not learn the prefix.
>
> ������� I use the radvd 0.6........I have to config in the kernel/proc any param?
Please use the latest radvd, radvd-0.6.2.
Regards.
-- Yuji Sekiya
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
