Giuliano Cardozo Medalha [mailto:[EMAIL PROTECTED] wrote:
> Dear Sr. > My name is Giuliano and I am a Debian user from Brazil (sorry > about my english) > I am configuring an IPv6 tunnel to connect to 6bone via RNP2. > The basic setup to test configuration is: > I have 4 machines > The first one is called IPv6_A and has the following configuration: > ---------------------------------------------------------------------- > eth0 - 192.168.0.1 / 24 > eth1 - fe80:1000::1/32 - gateway for the first IPv6 LAN > sixbone - logical tunnel interface pointing to IPv4 addr 192.168.0.2. > To configure interfaces I used the /etc/network/interfaces script. > To configure tunnel I used the following commands: > ip tunnel add sixbone mode sit remote 192.168.0.2 > ip link set sixbone up > ifconfig sixbone tunnel ::192.168.0.2 > route -A inet6 add 2000::0/3 sixbone > ------------------------------------------------------- > The second one is linked to the first one to a cross cable via eth0 > eth0 - 192.168.0.2 / 24 > eth1 - fe80:1000::1/32 - gateway for the second IPv6 LAN > sixbone - logical tunnel interface poinitng toIPv4 addr 192.168.0.1 You can't use fe80's on those links, well.... you can but it will break something eventually. Check: http://www.ipng.nl/index.php3?page=setup.html&forcepage=linuxdebian.html How you can do this in a nice way on debian (great work by the way for the person(s) who did this ;) You can find uplinks to the 6bone from: http://hs247.com http://dmoz.org/Computers/Internet/Protocols/IP/IPng/ You should pick a close one wherever possible, ofcourse thats your choice ;) Another nice way to do it is: 'apt-get install freenet6' which is another thing I quite like. Greets, Jeroen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
