After getting servers onto IPv6, I recently had a go at trying to run IPv6 on a LAN with workstations
Currently, for IPv4 a) dhcpd does not run on the router, it runs on a Debian server b) the LAN uses DHCP and dynamic DNS updates between isc-dhcp and bind For IPv6, radvd is on the router: it is not clear whether dhcpd has to run on the router as well or can they be different hosts (e.g. radvd on the router and dhcpd on the Debian server)? This bug suggests that dynamic DNS updates are not possible with Debian, but maybe that is not current information, I put a link to a conflicting report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=619310 Is it strongly recommended to use any of the other dhcpd servers instead of ISC? Another issue is client configuration: it appears that NetworkManager clients are able to work using stateless or stateful config On the other hand, for somebody who does not want NetworkManager, what is the recommended way to configure /etc/network/interfaces? I notice that there are different ways to configure it, e.g. # for stateless iface eth0 inet6 auto # for stateful #iface eth0 inet6 dhcp Is there a way to configure the interfaces file to "just work" on any network, without NetworkManager? When I run ifdown, I notice that the IPv4 address is released and the link is brought down before the dhclient -6 process finishes releasing it's IP, the process then gets stuck for a while and logs various errors Should NetworkManager and the interfaces file always bring up both IPv4 or IPv6 whenever possible or is it just one or the other? -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
