If you use iptables... set up explicit allow rules... for instance: iptables -I INPUT 1 -s 202.a(network address) -i eth0 -j ACCEPT iptables -I OUTPUT 1 -o 202.a(network address) -o eth0 -j ACCEPT iptables -I OUTPUT 2 -o eth0 -j ACCEPT
This will setup the rules in the proper order, and you can reset the counters any time you wish, or write a script to collect/reset them and import them to an mrtg compatible file. -Roger On Fri, 23 Aug 2002 13:04:01 +0800 "Sanjeev \"Ghane\" Gupta" <[EMAIL PROTECTED]> wrote: > Folks, > > I am running SQUID for a client, in transparent mode, woody, 2.4.19. The > edge router sends all port 80 to me, I send out to the router on the same > interface. I can capture total traffic on the interface. The users are on > 202.a.x.y. > > What I need is a way to see: > Traffic on eth0 to and from 202.a > Traffic on eth0 to and from all other nets > > This way, I can clearly see what reduction in traffic is occuring. I can > get figures from SQUID, but these do not tally with the edge router's view, > which shows practically no difference between incoming and outgoing on the > port. If SQUID is caching, outgoing should be more, as the SQUID acts as a > source for some objects, right? > > Any way to do this? > > -- > Sanjeev > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
pgpxoWQK4KPAF.pgp
Description: PGP signature
