On Thu, Aug 7, 2008 at 11:41 PM, Alberto <[EMAIL PROTECTED]> wrote: > Sera, dopo aver realizzato l'immagine di wxp, mi sono cimentato con > l'installazione di debian testing (terminata poco fa). > > L'hd l'ho partizionato nel seguente modo (anche se credo di aver fatto > una caxxata :) ) > > ###################### > # fdisk -l > Disk /dev/sda: 100.0 GB, 100030242816 bytes > 255 heads, 63 sectors/track, 12161 cylinders > Units = cylinders of 16065 * 512 = 8225280 bytes > Disk identifier: 0xd53d826f > > Device Boot Start End Blocks Id System > /dev/sda1 1 1305 10482381 7 HPFS/NTFS > /dev/sda2 1306 1439 1076355 b W95 FAT32 > (swap di wxp) > /dev/sda3 1470 12161 85883490 5 Extended > /dev/sda4 * 1440 1469 240975 83 Linux > /dev/sda5 12101 12161 489982+ 82 Linux swap / > Solaris > /dev/sda6 1470 1499 240912 83 Linux > /dev/sda7 1500 2411 7325608+ 83 Linux > /dev/sda8 6386 12099 45897673+ 83 Linux > /dev/sda9 2412 2593 1461883+ 83 Linux > /dev/sda10 2594 2775 1461883+ 83 Linux > /dev/sda11 2776 3930 9277506 83 Linux > > Partition table entries are not in disk order > ###################### > > montati in questo modo > ###################### > # df -h > Filesystem Dimens. Usati Disp. Uso% Montato su > /dev/sda4 236M 153M 83M 65% / > tmpfs 1008M 0 1008M 0% /lib/init/rw > udev 10M 144K 9,9M 2% /dev > tmpfs 1008M 0 1008M 0% /dev/shm > /dev/sda6 236M 48M 188M 21% /boot > /dev/sda11 8,8G 164M 8,2G 2% /home > /dev/sda8 44G 181M 43G 1% /media/share > /dev/sda9 1,4G 33M 1,4G 3% /tmp > /dev/sda7 7,0G 2,0G 5,0G 29% /usr > /dev/sda10 1,4G 1014M 414M 72% /var > ###################### > > Dopo aver installato grub ed aver riavviato il sistema sono iniziati i > primi problemi: > > PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved > > che ho risolto aggiungendo pci=nommconf; ho dovuto inoltre cambiare / > dev/hda* con /dev/sda* (anche in fstab) > ###################### > title Debian GNU/Linux, kernel 2.6.25-2-amd64 > root (hd0,5) > kernel /vmlinuz-2.6.25-2-amd64 root=/dev/hda4 ro quiet > initrd /initrd.img-2.6.25-2-amd64 > > title NUOVO Debian GNU/Linux, kernel 2.6.25-2-amd64 > root (hd0,5) > kernel /vmlinuz-2.6.25-2-amd64 root=/dev/sda4 ro quiet > pci=nommconf > initrd /initrd.img-2.6.25-2-amd64 > ###################### > > ###################### > # cat /etc/fstab > # /etc/fstab: static file system information. > # > # <file system> <mount point> <type> <options> <dump> <pass> > proc /proc proc defaults 0 0 > /dev/sda4 / reiserfs defaults 0 1 > /dev/sda6 /boot reiserfs notail 0 2 > /dev/sda11 /home ext3 defaults 0 2 > /dev/sda8 /media/share ext3 defaults 0 2 > /dev/sda9 /tmp reiserfs defaults 0 2 > /dev/sda7 /usr reiserfs defaults 0 2 > /dev/sda10 /var reiserfs defaults 0 2 > /dev/sda5 none swap sw 0 0 > /dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0 > ###################### > > Il problema รจ che dopo queste modifiche all'avvio devo comunque > inserire /dev/sda5 manualmente per far partire il tutto.
Risolto tutto semplicemendo aggiornando initramfs con questo comando update-initramfs -u -k all > Ho chiesto un po in giro, ma finora non ho avuto chiarimenti, potete aiutarmi > > grazie > > ###################### > #dmesg > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Linux version 2.6.25-2-amd64 (Debian 2.6.25-7) > ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian > 4.1.2-23)) #1 SMP Mon Jul 14 11:05:23 UTC 2008 > [ 0.000000] Command line: root=/dev/sda4 ro quiet pci=nommconf > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 > (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 > (reserved) > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 > (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 > (usable) > [ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI > data) > [ 0.000000] BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI > NVS) > [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 > (reserved) > [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 > used > [ 0.000000] Entering add_active_range(0, 256, 524240) 1 entries of > 3200 used > [ 0.000000] end_pfn_map = 1048576 > [ 0.000000] DMI 2.3 present. > [ 0.000000] ACPI: RSDP 000F7870, 0014 (r0 ACPIAM) > [ 0.000000] ACPI: RSDT 7FFD0000, 0034 (r1 A M I OEMRSDT 7000705 > MSFT 97) > [ 0.000000] ACPI: FACP 7FFD0200, 0084 (r2 A M I OEMFACP 7000705 > MSFT 97) > [ 0.000000] ACPI: DSDT 7FFD0430, 765B (r1 1ABZX 1ABZX001 1 > INTL 2002026) > [ 0.000000] ACPI: FACS 7FFDE000, 0040 > [ 0.000000] ACPI: APIC 7FFD0390, 0054 (r1 A M I OEMAPIC 7000705 > MSFT 97) > [ 0.000000] ACPI: MCFG 7FFD03F0, 003C (r1 A M I OEMMCFG 7000705 > MSFT 97) > [ 0.000000] ACPI: OEMB 7FFDE040, 0046 (r1 A M I AMI_OEM 7000705 > MSFT 97) > [ 0.000000] Scanning NUMA topology in Northbridge 24 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-000000007ffd0000 > [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 > used > [ 0.000000] Entering add_active_range(0, 256, 524240) 1 entries of > 3200 used > [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffd0000 > [ 0.000000] NODE_DATA [000000000000c000 - 0000000000012fff] > [ 0.000000] bootmap [0000000000013000 - 0000000000022fff] pages > 10 > [ 0.000000] early res: 0 [0-fff] BIOS data page > [ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE > [ 0.000000] early res: 2 [200000-63d2f7] TEXT DATA BSS > [ 0.000000] early res: 3 [3790f000-37fef641] RAMDISK > [ 0.000000] early res: 4 [9fc00-a0bff] EBDA > [ 0.000000] early res: 5 [8000-bfff] PGTABLE > [ 0.000000] No mptable found. > [ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD - >>ffff810001200000 on node 0 > [ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD - >>ffff810001600000 on node 0 > [ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD - >>ffff810001a00000 on node 0 > [ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD - >>ffff810001e00000 on node 0 > [ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD - >>ffff810002200000 on node 0 > [ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD - >>ffff810002600000 on node 0 > [ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD - >>ffff810002a00000 on node 0 > [ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD - >>ffff810002e00000 on node 0 > [ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD - >>ffff810003200000 on node 0 > [ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD - >>ffff810003600000 on node 0 > [ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD - >>ffff810003a00000 on node 0 > [ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD - >>ffff810003e00000 on node 0 > [ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD - >>ffff810004200000 on node 0 > [ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD - >>ffff810004600000 on node 0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0 -> 4096 > [ 0.000000] DMA32 4096 -> 1048576 > [ 0.000000] Normal 1048576 -> 1048576 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0 -> 159 > [ 0.000000] 0: 256 -> 524240 > [ 0.000000] On node 0 totalpages: 524143 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 1093 pages reserved > [ 0.000000] DMA zone: 2850 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 7111 pages used for memmap > [ 0.000000] DMA32 zone: 513033 pages, LIFO batch:31 > [ 0.000000] Normal zone: 0 pages used for memmap > [ 0.000000] Movable zone: 0 pages used for memmap > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] Processor #0 (Bootup-CPU) > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl > dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low > level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Setting APIC routing to flat > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000e0000 > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - > 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 88000000 (gap: > 80000000:7f780000) > [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs > [ 0.000000] PERCPU: Allocating 35096 bytes of per cpu data > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. > Total pages: 515883 > [ 0.000000] Policy zone: DMA32 > [ 0.000000] Kernel command line: root=/dev/sda4 ro quiet > pci=nommconf > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) > [ 0.000000] TSC calibrated against PM_TIMER > [ 0.000002] time.c: Detected 1800.057 MHz processor. > [ 0.004000] Console: colour VGA+ 80x25 > [ 0.004000] console [tty0] enabled > [ 0.004000] Checking aperture... > [ 0.004000] Node 0: aperture @ 7ec000000 size 32 MB > [ 0.004000] Aperture beyond 4GB. Ignoring. > [ 0.004000] No AGP bridge found > [ 0.004000] Memory: 2056244k/2096960k available (2184k kernel code, > 40328k reserved, 1012k data, 372k init) > [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated > [ 0.084007] Calibrating delay using timer specific routine.. > 3602.47 BogoMIPS (lpj=7204953) > [ 0.084063] Security Framework initialized > [ 0.084070] SELinux: Disabled at boot. > [ 0.084074] Capability LSM initialized > [ 0.084320] Dentry cache hash table entries: 262144 (order: 9, > 2097152 bytes) > [ 0.086270] Inode-cache hash table entries: 131072 (order: 8, > 1048576 bytes) > [ 0.087198] Mount-cache hash table entries: 256 > [ 0.087388] Initializing cgroup subsys ns > [ 0.087393] Initializing cgroup subsys cpuacct > [ 0.087414] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 0.087417] CPU: L2 Cache: 1024K (64 bytes/line) > [ 0.087420] CPU 0/0 -> Node 0 > [ 0.087441] SMP alternatives: switching to UP code > [ 0.088014] Freeing SMP alternatives: 23k freed > [ 0.088028] ACPI: Core revision 20070126 > [ 0.140836] Using local APIC timer interrupts. > [ 0.144010] APIC timer calibration result 12500396 > [ 0.144012] Detected 12.500 MHz APIC timer. > [ 0.144081] Brought up 1 CPUs > [ 0.144179] CPU0 attaching sched-domain: > [ 0.144183] domain 0: span 00000001 > [ 0.144185] groups: 00000001 > [ 0.144408] net_namespace: 1016 bytes > [ 0.144412] Booting paravirtualized kernel on bare hardware > [ 0.144639] NET: Registered protocol family 16 > [ 0.144853] ACPI: bus type pci registered > [ 0.144935] PCI: Using configuration type 1 > [ 0.151059] ACPI: EC: Look up EC in DSDT > [ 0.157091] ACPI: Interpreter enabled > [ 0.157094] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.157118] ACPI: Using IOAPIC for interrupt routing > [ 0.167523] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data > = 0x62 > [ 0.167526] ACPI: EC: driver started in poll mode > [ 0.167656] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.168500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.168730] ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0.P0P1._PRT] > [ 0.187286] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 > 14 15) > [ 0.187468] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 > 14 15) > [ 0.187645] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 > 14 15) > [ 0.187823] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 > 14 15) > [ 0.188000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 > 14 15) > [ 0.188185] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12 > 14 15) > [ 0.188364] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 > 14 15) > [ 0.188544] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 > 14 15) > [ 0.188702] ACPI: Power Resource [GFAN] (off) > [ 0.188781] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 0.188813] pnp: PnP ACPI init > [ 0.188820] ACPI: bus type pnp registered > [ 0.189029] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 > (active) > [ 0.189094] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 > (active) > [ 0.189154] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 > (active) > [ 0.189279] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 > PNP030b (active) > [ 0.189465] pnp 00:04: Plug and Play ACPI device, IDs SYN0a04 > SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) > [ 0.189521] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 > (active) > [ 0.189577] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 > (active) > [ 0.190465] pnp 00:07: Plug and Play ACPI device, IDs PNP0510 > (active) > [ 0.191107] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 > (active) > [ 0.191267] 00:09: calling quirk 0xffffffff8035ba3a: > quirk_system_pci_resources+0x0/0x173() > [ 0.191323] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 > (active) > [ 0.191540] 00:0a: calling quirk 0xffffffff8035ba3a: > quirk_system_pci_resources+0x0/0x173() > [ 0.191591] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 > (active) > [ 0.191714] 00:0b: calling quirk 0xffffffff8035ba3a: > quirk_system_pci_resources+0x0/0x173() > [ 0.191766] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 > (active) > [ 0.191866] 00:0c: calling quirk 0xffffffff8035ba3a: > quirk_system_pci_resources+0x0/0x173() > [ 0.191917] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 > (active) > [ 0.192343] 00:0d: calling quirk 0xffffffff8035ba3a: > quirk_system_pci_resources+0x0/0x173() > [ 0.192397] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 > (active) > [ 0.192854] pnp: PnP ACPI: found 14 devices > [ 0.192856] ACPI: ACPI bus type pnp unregistered > [ 0.193049] usbcore: registered new interface driver usbfs > [ 0.193115] usbcore: registered new interface driver hub > [ 0.193159] usbcore: registered new device driver usb > [ 0.193305] PCI: Using ACPI for IRQ routing > [ 0.193308] PCI: If a device doesn't work, try "pci=routeirq". If > it helps, post a report > [ 0.204029] ACPI: RTC can wake from S4 > [ 0.216034] pnp: the driver 'system' has been registered > [ 0.216034] system 00:09: ioport range 0xa00-0xa0f has been > reserved > [ 0.216034] system 00:09: driver attached > [ 0.216034] system 00:0a: ioport range 0x480-0x48f has been > reserved > [ 0.216034] system 00:0a: ioport range 0x4d0-0x4d1 has been > reserved > [ 0.216034] system 00:0a: ioport range 0x800-0x8df has been > reserved > [ 0.216034] system 00:0a: ioport range 0x8e0-0x8ff has been > reserved > [ 0.216034] system 00:0a: iomem range 0xfff80000-0xffffffff could > not be reserved > [ 0.216034] system 00:0a: iomem range 0xffe80000-0xffefffff could > not be reserved > [ 0.216034] system 00:0a: iomem range 0xffb80000-0xffbfffff could > not be reserved > [ 0.216034] system 00:0a: iomem range 0xfed00000-0xfed003ff has > been reserved > [ 0.216034] system 00:0a: driver attached > [ 0.216034] system 00:0b: iomem range 0xfec00000-0xfec00fff has > been reserved > [ 0.216034] system 00:0b: iomem range 0xfee00000-0xfee00fff could > not be reserved > [ 0.216034] system 00:0b: driver attached > [ 0.216034] system 00:0c: iomem range 0xe0000000-0xefffffff has > been reserved > [ 0.216034] system 00:0c: driver attached > [ 0.216034] system 00:0d: iomem range 0x0-0x9ffff could not be > reserved > [ 0.216034] system 00:0d: iomem range 0xc0000-0xcffff has been > reserved > [ 0.216034] system 00:0d: iomem range 0xe0000-0xfffff could not be > reserved > [ 0.216034] system 00:0d: iomem range 0x100000-0x7fffffff could not > be reserved > [ 0.216034] system 00:0d: iomem range 0x0-0x0 could not be reserved > [ 0.216034] system 00:0d: driver attached > [ 0.216034] PCI: Bridge: 0000:00:01.0 > [ 0.216034] IO window: disabled. > [ 0.216034] MEM window: 0xfa200000-0xfe2fffff > [ 0.216034] PREFETCH window: > 0x00000000bde00000-0x00000000ddefffff > [ 0.216034] PCI: Bus 2, cardbus bridge: 0000:00:0a.0 > [ 0.216034] IO window: 0x00001000-0x000010ff > [ 0.216034] IO window: 0x00001400-0x000014ff > [ 0.216034] PREFETCH window: 0x88000000-0x8bffffff > [ 0.216034] MEM window: 0x8c000000-0x8fffffff > [ 0.216034] PCI: Setting latency timer of device 0000:00:01.0 to 64 > [ 0.216034] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, > low) -> IRQ 17 > [ 0.216034] NET: Registered protocol family 2 > [ 0.252055] IP route cache hash table entries: 65536 (order: 7, > 524288 bytes) > [ 0.252055] TCP established hash table entries: 262144 (order: 10, > 4194304 bytes) > [ 0.253008] TCP bind hash table entries: 65536 (order: 8, 1048576 > bytes) > [ 0.253931] TCP: Hash tables configured (established 262144 bind > 65536) > [ 0.253935] TCP reno registered > [ 0.268062] checking if image is initramfs... it is > [ 0.716101] Switched to high resolution mode on CPU 0 > [ 0.834012] Freeing initrd memory: 7041k freed > [ 0.841042] audit: initializing netlink socket (disabled) > [ 0.841056] type=2000 audit(1218145593.840:1): initialized > [ 0.841264] Total HugeTLB memory allocated, 0 > [ 0.841353] VFS: Disk quotas dquot_6.5.1 > [ 0.841383] Dquot-cache hash table entries: 512 (order 0, 4096 > bytes) > [ 0.841481] io scheduler noop registered > [ 0.841483] io scheduler anticipatory registered > [ 0.841485] io scheduler deadline registered > [ 0.841496] io scheduler cfq registered (default) > [ 0.841562] pci 0000:01:00.0: Boot video device > [ 0.841651] PCI: Setting latency timer of device 0000:00:01.0 to 64 > [ 0.841678] assign_interrupt_mode Found MSI capability > [ 0.841704] Allocate Port Service[0000:00:01.0:pcie00] > [ 0.844532] Real Time Clock Driver v1.12ac > [ 0.844626] Linux agpgart interface v0.103 > [ 0.844629] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, > IRQ sharing enabled > [ 0.844812] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > [ 0.844987] pnp: the driver 'serial' has been registered > [ 0.845168] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, > low) -> IRQ 18 > [ 0.845175] ACPI: PCI interrupt for device 0000:00:02.6 disabled > [ 0.845958] brd: module loaded > [ 0.846043] input: Macintosh mouse button emulation as /class/input/ > input0 > [ 0.846145] pnp: the driver 'i8042 kbd' has been registered > [ 0.846155] i8042 kbd 00:03: driver attached > [ 0.846189] pnp: the driver 'i8042 aux' has been registered > [ 0.846201] i8042 aux 00:04: driver attached > [ 0.846235] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at > 0x60,0x64 irq 1,12 > [ 0.848737] i8042.c: Detected active multiplexing controller, rev > 1.1. > [ 0.849919] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 0.849924] serio: i8042 AUX0 port at 0x60,0x64 irq 12 > [ 0.849927] serio: i8042 AUX1 port at 0x60,0x64 irq 12 > [ 0.849930] serio: i8042 AUX2 port at 0x60,0x64 irq 12 > [ 0.849932] serio: i8042 AUX3 port at 0x60,0x64 irq 12 > [ 0.860165] mice: PS/2 mouse device common for all mice > [ 0.860165] cpuidle: using governor ladder > [ 0.860165] cpuidle: using governor menu > [ 0.860165] TCP cubic registered > [ 0.860165] NET: Registered protocol family 1 > [ 0.860165] NET: Registered protocol family 17 > [ 0.860166] registered taskstats version 1 > [ 0.860166] Freeing unused kernel memory: 372k freed > [ 0.890697] input: AT Translated Set 2 keyboard as /class/input/ > input1 > [ 0.948721] ACPI: Transitioning device [FN00] to D3 > [ 0.948773] ACPI: PNP0C0B:00 is registered as cooling_device0 > [ 0.948779] ACPI: Fan [FN00] (off) > [ 0.954408] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > [ 0.954457] ACPI: ACPI0007:00 is registered as cooling_device1 > [ 0.954462] ACPI: Processor [CPU1] (supports 8 throttling states) > [ 0.968916] ACPI: LNXTHERM:01 is registered as thermal_zone0 > [ 0.970245] ACPI: Thermal Zone [THRM] (70 C) > [ 1.524399] No dock devices found. > [ 1.545881] SCSI subsystem initialized > [ 1.592308] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller > (OHCI) Driver > [ 1.592338] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, > low) -> IRQ 20 > [ 1.592354] ohci_hcd 0000:00:03.0: OHCI Host Controller > [ 1.592551] ohci_hcd 0000:00:03.0: new USB bus registered, assigned > bus number 1 > [ 1.592574] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfebff000 > [ 1.592613] libata version 3.00 loaded. > [ 1.650365] usb usb1: configuration #1 chosen from 1 choice > [ 1.650394] hub 1-0:1.0: USB hub found > [ 1.650407] hub 1-0:1.0: 3 ports detected > [ 1.745765] sdhci: Secure Digital Host Controller Interface driver > [ 1.745769] sdhci: Copyright(c) Pierre Ossman > [ 1.752334] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 1.752338] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.752341] usb usb1: Product: OHCI Host Controller > [ 1.752343] usb usb1: Manufacturer: Linux 2.6.25-2-amd64 ohci_hcd > [ 1.752345] usb usb1: SerialNumber: 0000:00:03.0 > [ 1.752379] ACPI: PCI Interrupt 0000:00:03.1[b] -> GSI 21 (level, > low) -> IRQ 21 > [ 1.752396] ohci_hcd 0000:00:03.1: OHCI Host Controller > [ 1.752459] ohci_hcd 0000:00:03.1: new USB bus registered, assigned > bus number 2 > [ 1.752480] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfebfe000 > [ 1.810389] usb usb2: configuration #1 chosen from 1 choice > [ 1.810421] hub 2-0:1.0: USB hub found > [ 1.810434] hub 2-0:1.0: 3 ports detected > [ 1.912356] usb usb2: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 1.912361] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.912363] usb usb2: Product: OHCI Host Controller > [ 1.912366] usb usb2: Manufacturer: Linux 2.6.25-2-amd64 ohci_hcd > [ 1.912368] usb usb2: SerialNumber: 0000:00:03.1 > [ 1.912400] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, > low) -> IRQ 22 > [ 1.912418] ohci_hcd 0000:00:03.2: OHCI Host Controller > [ 1.912473] ohci_hcd 0000:00:03.2: new USB bus registered, assigned > bus number 3 > [ 1.912494] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfebfd000 > [ 1.913303] Marking TSC unstable due to TSC halts in idle > [ 1.938348] usb usb3: configuration #1 chosen from 1 choice > [ 1.938378] hub 3-0:1.0: USB hub found > [ 1.938389] hub 3-0:1.0: 2 ports detected > [ 1.956265] usb 1-2: new full speed USB device using ohci_hcd and > address 2 > [ 1.960328] usb usb3: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 1.960331] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.960333] usb usb3: Product: OHCI Host Controller > [ 1.960335] usb usb3: Manufacturer: Linux 2.6.25-2-amd64 ohci_hcd > [ 1.960337] usb usb3: SerialNumber: 0000:00:03.2 > [ 1.960400] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, > low) -> IRQ 23 > [ 1.960409] ehci_hcd 0000:00:03.3: EHCI Host Controller > [ 1.960461] ehci_hcd 0000:00:03.3: new USB bus registered, assigned > bus number 4 > [ 1.960499] PCI: cache line size of 64 is not supported by device > 0000:00:03.3 > [ 1.960507] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfebfc000 > [ 2.088281] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, > driver 10 Dec 2004 > [ 2.088413] usb usb4: configuration #1 chosen from 1 choice > [ 2.088445] hub 4-0:1.0: USB hub found > [ 2.088454] hub 4-0:1.0: 8 ports detected > [ 2.104362] usb usb4: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 2.104365] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.104368] usb usb4: Product: EHCI Host Controller > [ 2.104370] usb usb4: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd > [ 2.104372] usb usb4: SerialNumber: 0000:00:03.3 > [ 2.104430] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, > low) -> IRQ 18 > [ 2.160553] ssb: Sonics Silicon Backplane found on PCI device > 0000:00:09.0 > [ 2.160625] ACPI: PCI Interrupt 0000:00:0a.1[b] -> GSI 18 (level, > low) -> IRQ 18 > [ 2.200510] firewire_ohci: Added fw-ohci device 0000:00:0a.1, OHCI > version 1.0 > [ 2.200616] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded > [ 2.200644] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, > low) -> IRQ 19 > [ 2.200932] eth0: RTL8169sb/8110sb at 0xffffc200008b0c00, > 00:15:f2:dc:8d:81, XID 10000000 IRQ 19 > [ 2.201767] sdhci: SDHCI controller found at 0000:00:0a.2 > [1180:0822] (rev 17) > [ 2.201777] ACPI: PCI Interrupt 0000:00:0a.2[C] -> GSI 19 (level, > low) -> IRQ 19 > [ 2.201790] sdhc0:slot0: Will use DMA mode even though HW doesn't > fully claim to support it. > [ 2.201827] mmc0: SDHCI at 0xfebf9400 irq 19 DMA > [ 2.212519] pata_sis 0000:00:02.5: version 0.5.2 > [ 2.213811] scsi0 : pata_sis > [ 2.215180] scsi1 : pata_sis > [ 2.215978] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma > 0xffa0 irq 14 > [ 2.215981] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma > 0xffa8 irq 15 > [ 2.248539] usb 1-2: device not accepting address 2, error -62 > [ 2.256906] ata1.00: ATA-7: FUJITSU MHV2100AT PL, 000000A0, max > UDMA/100 > [ 2.256910] ata1.00: 195371568 sectors, multi 16: LBA > [ 2.268549] hub 1-0:1.0: unable to enumerate USB device on port 2 > [ 2.305343] ata1.00: configured for UDMA/100 > [ 2.317439] firewire_core: created device fw0: GUID > 00e01800034f9bb7, S400 > [ 2.361411] usb 4-4: new high speed USB device using ehci_hcd and > address 2 > [ 2.373817] ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.00, max UDMA/ > 33 > [ 2.401445] usb 4-4: configuration #1 chosen from 1 choice > [ 2.401445] usb 4-4: New USB device found, idVendor=0402, > idProduct=5602 > [ 2.401445] usb 4-4: New USB device strings: Mfr=0, Product=1, > SerialNumber=0 > [ 2.401445] usb 4-4: Product: USB2.0 Camera > [ 2.453882] ata2.00: configured for UDMA/33 > [ 2.454010] scsi 0:0:0:0: Direct-Access ATA FUJITSU > MHV2100A 0000 PQ: 0 ANSI: 5 > [ 2.455723] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM > UJ-841S 1.00 PQ: 0 ANSI: 5 > [ 2.461128] Uniform Multi-Platform E-IDE driver > [ 2.461132] ide: Assuming 33MHz system bus speed for PIO modes; > override with idebus=xx > [ 2.491091] Driver 'sd' needs updating - please use bus_type > methods > [ 2.491197] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors > (100030 MB) > [ 2.491216] sd 0:0:0:0: [sda] Write Protect is off > [ 2.491219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 2.491246] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 2.491311] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors > (100030 MB) > [ 2.491327] sd 0:0:0:0: [sda] Write Protect is off > [ 2.491330] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 2.491356] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 2.491360] sda:<4>Driver 'sr' needs updating - please use > bus_type methods > [ 2.527615] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9<3>hub > 4-0:1.0: unable to enumerate USB device on port 6 > [ 2.535664] sda10 sda11 > sda4 > [ 2.535904] sd 0:0:0:0: [sda] Attached SCSI disk > [ 2.540656] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/ > form2 cdda tray > [ 2.540662] Uniform CD-ROM driver Revision: 3.20 > [ 2.540729] sr 1:0:0:0: Attached scsi CD-ROM sr0 > [ 2.560705] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 2.560729] sr 1:0:0:0: Attached scsi generic sg1 type 5 > [ 2.745150] usb 3-2: new full speed USB device using ohci_hcd and > address 2 > [ 2.852814] usb 3-2: configuration #1 chosen from 1 choice > [ 2.857150] usb 3-2: New USB device found, idVendor=0b05, > idProduct=1712 > [ 2.857154] usb 3-2: New USB device strings: Mfr=0, Product=0, > SerialNumber=3 > [ 2.857157] usb 3-2: SerialNumber: 0194E8-5B-0002 > [ 3.178730] ReiserFS: sda4: found reiserfs format "3.6" with > standard journal > [ 3.178741] ReiserFS: sda4: using ordered data mode > [ 3.194214] ReiserFS: sda4: journal params: device sda4, size 8192, > journal first block 18, max trans len 1024, max batch 900, max commit > age 30, max trans age 30 > [ 3.194993] ReiserFS: sda4: checking transaction log (sda4) > [ 3.202397] ReiserFS: sda4: Using r5 hash to sort names > [ 5.212626] input: Power Button (FF) as /class/input/input2 > [ 5.237493] ACPI: Power Button (FF) [PWRF] > [ 5.237590] input: Power Button (CM) as /class/input/input3 > [ 5.266081] ACPI: Power Button (CM) [PWRB] > [ 5.266164] input: Lid Switch as /class/input/input4 > [ 5.277747] ACPI: EC: non-query interrupt received, switching to > interrupt mode > [ 5.279616] ACPI: Lid Switch [LID] > [ 5.279699] input: Sleep Button (CM) as /class/input/input5 > [ 5.309500] ACPI: Sleep Button (CM) [SLPB] > [ 5.309519] asus-laptop: Asus Laptop Support version 0.42 > [ 5.312294] asus-laptop: A6Km model detected > [ 5.316376] Registered led device: asus::mail > [ 5.446982] ACPI: AC Adapter [AC0] (on-line) > [ 5.565040] ACPI: Battery Slot [BAT0] (battery absent) > [ 5.655058] ACPI: device:05 is registered as cooling_device2 > [ 5.655205] input: Video Bus as /class/input/input6 > [ 5.685533] ACPI: Video Device [VGA] (multi-head: yes rom: no > post: no) > [ 6.432663] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, > low) -> IRQ 18 > [ 6.537182] Bluetooth: Core ver 2.11 > [ 6.581645] NET: Registered protocol family 31 > [ 6.581648] Bluetooth: HCI device and connection manager > initialized > [ 6.581654] Bluetooth: HCI socket layer initialized > [ 6.605198] Bluetooth: HCI USB driver ver 2.9 > [ 6.607809] usbcore: registered new interface driver hci_usb > [ 7.085274] b43-phy0: Broadcom 4318 WLAN found > [ 7.146097] input: PC Speaker as /class/input/input7 > [ 7.161849] phy0: Selected rate control algorithm 'pid' > [ 7.239668] NET: Registered protocol family 23 > [ 7.257591] intel8x0_measure_ac97_clock: measured 53220 usecs > [ 7.257595] intel8x0: clocking to 48000 > [ 7.311314] Broadcom 43xx driver loaded [ Features: PMLR, Firmware- > ID: FW13 ] > [ 7.311382] Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1107] > [ 7.438491] Yenta: ISA IRQ mask 0x0cb8, PCI irq 17 > [ 7.438495] Socket status: 30000006 > [ 7.710167] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, > low) -> IRQ 18 > [ 7.813669] MC'97 1 converters and GPIO not ready (0xff00) > [ 7.828181] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, > caps: 0xa04713/0x10008 > [ 7.866243] input: SynPS/2 Synaptics TouchPad as /class/input/ > input8 > [ 7.896876] pnp: the driver 'parport_pc' has been registered > [ 7.896895] parport_pc 00:08: reported by Plug and Play ACPI > [ 7.896920] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] > [ 7.993715] parport_pc 00:08: driver attached > [ 9.149822] Adding 489972k swap on /dev/sda5. Priority:-1 extents: > 1 across:489972k > [ 10.448504] loop: module loaded > [ 12.805969] ReiserFS: sda6: found reiserfs format "3.6" with > standard journal > [ 12.805980] ReiserFS: sda6: using ordered data mode > [ 12.806308] ReiserFS: sda6: journal params: device sda6, size 8192, > journal first block 18, max trans len 1024, max batch 900, max commit > age 30, max trans age 30 > [ 12.808050] ReiserFS: sda6: checking transaction log (sda6) > [ 12.809679] ReiserFS: sda6: Using r5 hash to sort names > [ 12.905724] kjournald starting. Commit interval 5 seconds > [ 12.905876] EXT3 FS on sda11, internal journal > [ 12.905882] EXT3-fs: mounted filesystem with ordered data mode. > [ 12.936802] kjournald starting. Commit interval 5 seconds > [ 12.937135] EXT3 FS on sda8, internal journal > [ 12.937140] EXT3-fs: mounted filesystem with ordered data mode. > [ 12.959651] ReiserFS: sda9: found reiserfs format "3.6" with > standard journal > [ 12.959665] ReiserFS: sda9: using ordered data mode > [ 12.959963] ReiserFS: sda9: journal params: device sda9, size 8192, > journal first block 18, max trans len 1024, max batch 900, max commit > age 30, max trans age 30 > [ 12.961583] ReiserFS: sda9: checking transaction log (sda9) > [ 12.975030] ReiserFS: sda9: Using r5 hash to sort names > [ 12.991150] ReiserFS: sda7: found reiserfs format "3.6" with > standard journal > [ 12.991150] ReiserFS: sda7: using ordered data mode > [ 12.992866] ReiserFS: sda7: journal params: device sda7, size 8192, > journal first block 18, max trans len 1024, max batch 900, max commit > age 30, max trans age 30 > [ 12.994625] ReiserFS: sda7: checking transaction log (sda7) > [ 13.003829] ReiserFS: sda7: Using r5 hash to sort names > [ 13.015869] ReiserFS: sda10: found reiserfs format "3.6" with > standard journal > [ 13.015869] ReiserFS: sda10: using ordered data mode > [ 13.015943] ReiserFS: sda10: journal params: device sda10, size > 8192, journal first block 18, max trans len 1024, max batch 900, max > commit age 30, max trans age 30 > [ 13.016852] ReiserFS: sda10: checking transaction log (sda10) > [ 13.027957] ReiserFS: sda10: Using r5 hash to sort names > [ 13.961367] r8169: eth0: link up > [ 15.199716] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile > Technology MT-34 processors (1 cpu cores) (version 2.20.00) > [ 15.199716] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa > [ 15.199716] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc > [ 15.199716] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16 > [ 16.410383] lp0: using parport0 (interrupt-driven). > [ 16.425072] ppdev: user-space parallel port driver > [ 16.603304] NET: Registered protocol family 10 > [ 16.604056] lo: Disabled Privacy Extensions > [ 16.707136] Clocksource tsc unstable (delta = -93933502 ns) > [ 18.601058] pcmcia: Detected deprecated PCMCIA ioctl usage from > process: discover. > [ 18.601065] pcmcia: This interface will soon be removed from the > kernel; please expect breakage unless you upgrade to new tools. > [ 18.601069] pcmcia: see > http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html > for details. > [ 18.897030] warning: `avahi-daemon' uses 32-bit capabilities > (legacy support in use) > [ 19.871648] hub 4-0:1.0: unable to enumerate USB device on port 2 > [ 20.079953] usb 2-1: new low speed USB device using ohci_hcd and > address 2 > [ 20.204811] usb 2-1: configuration #1 chosen from 1 choice > [ 20.213145] usb 2-1: New USB device found, idVendor=046d, > idProduct=c025 > [ 20.213151] usb 2-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 20.213154] usb 2-1: Product: USB-PS/2 Optical Mouse > [ 20.213156] usb 2-1: Manufacturer: B16_b_02 > [ 20.521860] usbcore: registered new interface driver hiddev > [ 20.529090] input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/ > input9 > [ 20.560891] input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 > Optical Mouse] on usb-0000:00:03.1-1 > [ 20.560914] usbcore: registered new interface driver usbhid > [ 20.560918] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > [ 20.857362] Bluetooth: L2CAP ver 2.9 > [ 20.857366] Bluetooth: L2CAP socket layer initialized > [ 20.969512] Bluetooth: RFCOMM socket layer initialized > [ 20.969528] Bluetooth: RFCOMM TTY layer initialized > [ 20.969530] Bluetooth: RFCOMM ver 1.8 > [ 21.161126] input: b43-phy0 as /class/input/input10 > [ 21.285456] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 21.285516] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 24.199955] input: b43-phy0 as /class/input/input11 > [ 24.272352] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 24.272359] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 32.373236] eth0: no IPv6 routers present > [ 35.311744] input: b43-phy0 as /class/input/input12 > [ 35.376381] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 35.376389] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 44.670075] input: b43-phy0 as /class/input/input13 > [ 44.735393] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 44.735401] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 49.858738] input: b43-phy0 as /class/input/input14 > [ 49.930078] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 49.930085] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 55.829033] input: b43-phy0 as /class/input/input15 > [ 55.900251] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 55.900258] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 64.320733] input: b43-phy0 as /class/input/input16 > [ 64.389153] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 64.389160] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 73.839868] input: b43-phy0 as /class/input/input17 > [ 73.927763] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 73.927770] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 77.762368] input: b43-phy0 as /class/input/input18 > [ 77.833779] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 77.833786] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 116.909182] input: b43-phy0 as /class/input/input19 > [ 116.984642] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 116.984649] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 126.575579] input: b43-phy0 as /class/input/input20 > [ 126.646733] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 126.646740] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 139.447587] input: b43-phy0 as /class/input/input21 > [ 139.519293] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 139.519300] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 154.212834] input: b43-phy0 as /class/input/input22 > [ 154.284279] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 154.284286] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 171.660612] input: b43-phy0 as /class/input/input23 > [ 171.738223] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 171.738232] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > [ 201.266586] input: b43-phy0 as /class/input/input24 > [ 201.334465] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found > or load failed. > [ 201.334472] b43-phy0 ERROR: You must go to > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and > download the latest firmware (version 4). > -- Per REVOCARE l'iscrizione alla lista, inviare un email a [EMAIL PROTECTED] con oggetto "unsubscribe". Per problemi inviare un email in INGLESE a [EMAIL PROTECTED] To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]