On 090503, 16:56, Guldo K wrote: > > accidenti, ho fatto ma non funziona > Mi spiace... :-( > Ti posso solo dire che il mio lilo.conf e' cosi': > > image=/boot/vmlinuz-2.4.20-686-1.030503 > label=3Mag03 > append="/dev/hda=ide-scsi"
ho messo append="hdc=ide-scsi" (senza /dev); sara' una questione di link in /dev.... Comunque athlon:~# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 03 Lun: 00 Vendor: YAMAHA Model: CRW8424S Rev: 1.0d Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: SAMSUNG Model: CD-ROM SC-152B Rev: BS02 Type: CD-ROM ANSI SCSI revision: 02 e athlon:~# cdrecord -scanbus Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling Linux sg driver version: 3.1.22 Using libscg version 'schily-0.5' scsibus0: 0,0,0 0) * 0,1,0 1) * 0,2,0 2) * 0,3,0 3) 'YAMAHA ' 'CRW8424S ' '1.0d' Removable CD-ROM 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * scsibus1: 1,0,0 100) 'SAMSUNG ' 'CD-ROM SC-152B ' 'BS02' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * dunque per emulare emula (ho cambiato anche /etc/fstab, nel mount point cdrom si monta il device /dev/scd1, il cdrom EIDE appunto) tuttavvia: athlon:~# cdrdao copy --simulate --speed 8 --eject --on-the-fly --device 0,3,0 --source-device 1,0,0 Cdrdao version 1.1.5 - (C) Andreas Mueller <[EMAIL PROTECTED]> SCSI interface library - (C) Joerg Schilling L-EC encoding library - (C) Heiko Eissfeldt Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'schily-0.5' 0,3,0: YAMAHA CRW8424S Rev: 1.0d Using driver: Generic SCSI-3/MMC - Version 1.2 (options 0x0000) 1,0,0: SAMSUNG CD-ROM SC-152B Rev: BS02 ERROR: No driver found for 'SAMSUNG CD-ROM SC-152B', available drivers: cdd2600 generic-mmc generic-mmc-raw plextor plextor-scan ricoh-mp6200 sony-cdu920 sony-cdu948 taiyo-yuden teac-cdr55 toshiba yamaha-cdr10x ERROR: Cannot setup source device 1,0,0. Mi pare di capire che ora che il cdrom e' visto come dispositivo SCSI ha bisogno di un driver per funzionare... dovro' ricompilare per inserirlo? magari becco il modulo da qualche parte, sapessi quale pero'... Comunque se metto un cd nel cdrom e faccio $ls /cdrom il contenuto lo visualizza, quindi magari non e' questione di driver mancante grazie gianni