Tenetevi forte.
Ho collegato una tastiera PS2 e ho fatto il login.
Ho pensato subito "avr� scelto il kernel vecchio... non quello con cui ho
dialogato ieri sera".
Ma per sfizio ho dato un uname -a
AHHHHHHHHHHHHHHHHHHHHH!!!!!!!
Ho aggiornato il Kernel!!!!!! :-))))))))))))))))))
E funziona!!! :-)
Sta sera offro da bere a tutti!!!

Allego la buona nuova. Forse sembrer� eccessivo ma lo vedo come un primo passo
verso la liberazione! ;-)

Ho eseguito anche dmesg come consigliato. E per sfizio ho allegato anche quello.
Sembra che i moduli USB ci siano. Ma
dar� una meglio occhiata pi� tardi.
Alla peggio cmq uso la tastiera PS2 (o l'adattatore della USB) per scoprire come
fare andare direttamente la USB.
Ciao!!!
Linux version 2.4.22 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian 
prerelease)) #1 Thu Sep 18 00:58:44 CEST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
 BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
 BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131068
zone(0): 4096 pages.
zone(1): 126972 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=miokernel ro root=301
Initializing CPU#0
Detected 1822.514 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3630.69 BogoMIPS
Memory: 514912k/524272k available (2113k kernel code, 8972k reserved, 843k 
data, 108k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(TM) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1990, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Coda Kernel/Venus communications, v5.3.18, [EMAIL PROTECTED]
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
NTFS driver v1.1.22 [Flags: R/O]
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI 
ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
lp0: using parport0 (polling).
Non-volatile memory driver v1.2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit 
encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient!
NET3 PLIP version 2.4-parport [EMAIL PROTECTED]
plip0: Parallel port at 0x378, not using IRQ.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: MAXTOR 6L040J2, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive
hdc: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
hdd: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: setmax LBA 78177792, native  66055248
hda: 66055248 sectors (33820 MB) w/1819KiB Cache, CHS=4111/255/63
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=9964/255/63
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM drive, 256kB Cache
Partition check:
 hda: hda1 hda2
 hdb: hdb1 hdb2 < hdb5 >
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Via 686a/8233/8235 audio driver 1.9.1-ac3
PCI: Found IRQ 4 for device 00:11.5
IRQ routing conflict for 00:11.5, have irq 3, want irq 4
via82cxxx: Six channel audio available
PCI: Setting latency timer of device 00:11.5 to 64
via82cxxx: timeout while reading AC97 codec (0x8000000)
ac97_codec: AC97 Audio codec, id: ADS112 (Unknown)
via82cxxx: board #1 at 0xE000, IRQ 3
es1371: version v0.32 time 00:59:50 Sep 18 2003
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 3 for device 00:10.0
IRQ routing conflict for 00:10.0, have irq 10, want irq 3
IRQ routing conflict for 00:10.1, have irq 10, want irq 3
IRQ routing conflict for 00:10.2, have irq 10, want irq 3
IRQ routing conflict for 00:10.3, have irq 10, want irq 3
host/uhci.c: USB UHCI at I/O 0xb800, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.1
IRQ routing conflict for 00:10.0, have irq 10, want irq 3
IRQ routing conflict for 00:10.1, have irq 10, want irq 3
IRQ routing conflict for 00:10.2, have irq 10, want irq 3
IRQ routing conflict for 00:10.3, have irq 10, want irq 3
host/uhci.c: USB UHCI at I/O 0xb400, IRQ 10
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.2
IRQ routing conflict for 00:10.0, have irq 10, want irq 3
IRQ routing conflict for 00:10.1, have irq 10, want irq 3
IRQ routing conflict for 00:10.2, have irq 10, want irq 3
IRQ routing conflict for 00:10.3, have irq 10, want irq 3
host/uhci.c: USB UHCI at I/O 0xb000, IRQ 10
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usbscanner
scanner.c: 0.4.13:USB Scanner Driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 108k freed
Adding Swap: 979956k swap-space (priority -1)
spurious 8259A interrupt: IRQ7.
Linux Orion 2.4.22 #1 Thu Sep 18 00:58:44 CEST 2003 i686 unknown

Rispondere a