On Oct 20, 2004, at 4:28 PM, Guglielmo Dapavo wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Premoli, Roberto [ITPPG/1010] wrote:
| Ok. Adesso woody (testuale) e' sul pc, aehm, volevo dire, sul MAC. | Va bene, la schermata e' ondeggiante, la grafica non si installa, | il kernel l'ho ricompilato ma non so come installarlo. Dove cavolo | e' l'equivalente del lilo?!? C'e' quik che sembra un equivalente, | ma quando ho modificato /etc/quik.conf il mac non ha piu' fatto il | boot.
schermata ondeggiante??? ma che monitor hai? � originale o un monito vga con un adattatore?
ti hanno gi� risposto che l'equivalente di lilo � yaboot.
se invece hai un oldworld, la cosa � leggermete differente:
il kernel deve risiedere nella partizione di macos, quindi devi compilare il kernel e installarlo come di consueto con dpkg -i kernelcompilato.deb
poi monti la partizione di macos con
/mount -t hfs /dev/xyz /mnt
e copi il nuovo kernel da /boot/vmlinux_qualchecosa in /mnt/System Folder/vmlinux
okkio a rinominare prima il vecchio kernel /mnt/System Folder/vmlinux in /mnt/System Folder/vmlinux.old in modo da poter tornare indietro nel caso il tuo nuovo kernel abbia dei problemi a fare il boot
per sapere su quale devide si trova la partizione di Macos:
# df /
per vedere se usi un disco scsi o ide ide = /dev/hda scsi= /dev/sda
poi dai un
fdisk -l /dev/sda
e ti verr� stampata a video la lista delle partizioni.
ciao MaX
Copio e incollo dalla mail su debian-ppc:
It's been a week of reading and fumbling, but I got sarge booting with
quik. I'm hurrying to leave for the day, so I'll post some system
details here and follow up on proceedures if clarification is requested.
Installation: pre-rc2 buisnesscard iso cd of 20040930 initiated via BootX-1.2.2
Machine: PowerMac Beige G3 uname -a Linux ppc2 2.6.8-ppc2.100504-1 #1 Tue Oct 5 11:43:06 EDT 2004 ppc GNU/Linux
hard drive hda: QUANTUM FIREBALL SE4.3A, ATA DISK drive hda: MDMA, cycleTime: 120, accessTime: 75, recTime: 45 hda: Set MDMA timing for mode 2, reg: 0x00211526 hda: Enabling MultiWord DMA 2 hda: max request size: 128KiB hda: 8418816 sectors (4310 MB) w/80KiB Cache, CHS=14848/9/63, (U)DMA
partitions IDE1 master (hda) - 4.3 GB QUANTUM FIREBALL SE4.3A ~ #1 32.3 kB Apple ~ #2 27.6 kB Macintosh ~ #3 37.9 kB Macintosh ~ #4 102.4 kB Macintosh ~ #5 262.1 kB Macintosh ~ #6 262.1 kB Patch Partit ~ #7 314.6 MB hfs+ untitled ~ #8 52.4 MB hfs+ untitled 2 ~ #9 900.0 MB ext2 root ~ #10 1.0 GB ext3 var ~ #11 1.7 GB ext3 usr ~ #12 342.7 MB swap swap
lspci
0000:00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
0000:00:0d.0 USB Controller: OPTi Inc. 82C861 (rev 10)
0000:00:10.0 ff00: Apple Computer Inc. Heathrow Mac I/O (rev 01)
0000:00:12.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro
215GP (
rev 5c)
0000:00:00.0 0600: 1057:0002 (rev 40) 0000:00:0d.0 0c03: 1045:c861 (rev 10) 0000:00:10.0 ff00: 106b:0010 (rev 01) 0000:00:12.0 0300: 1002:4750 (rev 5c)
cpuinfo processor : 0 cpu : 740/750 temperature : 39-41 C (uncalibrated) clock : 233MHz revision : 2.2 (pvr 0008 0202) bogomips : 465.92 machine : Power Macintosh motherboard : AAPL,Gossamer MacRISC detected as : 48 (PowerMac G3 (Gossamer)) pmac flags : 00000000 L2 cache : 512K unified pipelined-syncro-burst memory : 352MB pmac-generation : OldWorld
Open Firmware version 2.01f nvsetenv little-endian? false real-mode? false auto-boot? false diag-switch? false fcode-debug? false oem-banner? false oem-logo? false use-nvramrc? true real-base 0xffffffff real-size 0x100000 virt-base 0xffffffff virt-size 0x100000 load-base 0x600000 pci-probe-list 0xffffffff screen-#columns 0x64 screen-#rows 0x28 selftest-#megs 0x0 boot-device ide/[EMAIL PROTECTED],0:9 boot-file diag-device diag-file input-device kbd output-device screen oem-banner oem-logo nvramrc hex ~ : $D find-device ; ~ : $E device-end ; ~ : $L BLpatch ; : $R BRpatch ; ~ : $X execute ; ~ : $p 0 to my-self property ; ~ : $a " /chosen" $D $p $E ; ~ : &c " ata-enable" $call-parent ; ~ 10 buffer: km ~ dev kbd ~ get-key-map km swap move ~ $E ~ : ck 0 do swap dup 3 >> km + c@ 1 rot 7 and << and or loop ; ~ : bootr 0d word count encode-string " machargs" $a ~ 0 0 1 ck if 0 and else f 3d 0 2 ck if 40 or then then ~ if bye else 1e 0 do ['] boot catch drop 1f4 ms loop then bye ; ~ : myboot boot-command eval ; ~ dev enet ~ ' open constant $M ~ : $M2 $M 710 - $X ; ~ : rl@ -7D9D40 $X ; ~ : chstat begin $M2 $M 14f8 - $X -7D6C20 $X rl@ 400 and 0= until ; ~ : bmstat begin $M2 $M 13F0 - $X rl@ 100 and until ; ~ : xmt1 get-msecs $M 720 - ! chstat $M A00 - $X bmstat chstat ; ~ ' xmt1 ' WRITE 10 + l! ~ 62 ' READ 7 - c! ~ : READ { _p _n ; _a } begin _p _n bead -> _a _a 2+ ~ if _p c@ 80 and 0= else 1 then until _a ; ~ $E ~ dev /packages/obp-tftp ~ : $M over + ['] noop $L ; ~ : $O ['] open + ; ~ : $M1 dup 24 - -1720 $O $X 6 move 14 + ; ~ -5BC $O ' $M1 $L ~ 0 $O E8 $M EC $M F0 $M F4 $M F8 + ' true $L ~ $E ~ dev /packages/mac-parts ~ : $M -7E89E0 $X 8000 alloc-mem 7F00 + 4 -7E89E0 $X ; ~ ' load 268 - ' $M $L ~ ' load 160 + ' 0 $L ~ $E ~ dev ide0 ~ : open use-ata-interface 0 &c -1 ; ~ : set-device-ID set-drive-select ; ~ : reset-atapi-bus reset-ata-bus ; ~ ' reset-ata-bus 2c + ' 2 $L ~ $E ~ dev ide1 ~ : open use-ata-interface 0 &c -1 ; ~ : set-device-ID set-drive-select ; ~ : reset-atapi-bus reset-ata-bus ; ~ ' reset-ata-bus 2c + ' 2 $L ~ $E ~ dev scsi ~ : $M ['] do-cmd + ; ~ : $M2 5 us -5f0 $M $X ; ~ : $M3 -710 $M f over $X $X ; ~ : $M4 1 ms ; ~ -1AC $M ' $M2 $L ~ 100 $M ' $M3 $L ~ 120 $M ' $M4 $L ~ 124 $M ' 1 $L ~ $E ~ unselect-dev boot-command boot
quik.conf ## quik.conf generated by debian-installer ## second image by me. image=Linux fails with unknown-block(0,0)
init-message="QuikBoot (sarge)" default=MyLinux timeout=100 partition=9
## Do not point image= to a symlink, quik can't follow symlinks image=/boot/vmlinux-2.6.8-powerpc ~ root=/dev/hda9 ~ label=Linux ~ read-only ~ ramdisk=/boot/initrd.img-2.6.8-powerpc
image=/boot/vmlinux-2.6.8-ppc2.100504-1 ~ root=/dev/hda9 ~ label=MyLinux ~ read-only ~ ramdisk=/boot/initrd.img-ppc2.100504-1
lsmod - d-i original 2.6.8-powerpc kernel - fails to boot with quik Installed to do the installation
Module Size Used by xfs 585628 0 reiserfs 333464 0 jfs 201284 0 ext3 130736 2 jbd 71576 1 ext3 mbcache 10116 1 ext3 vfat 15968 0 fat 54052 1 vfat ext2 65220 1 af_packet 21352 0 bmac 19120 0 crc32 4832 1 bmac ds 23844 0 yenta_socket 23616 0 pcmcia_core 76788 2 ds,yenta_socket isofs 42296 0 nls_base 8672 4 jfs,vfat,fat,isofs ide_cd 49764 0 cdrom 49660 1 ide_cd ide_disk 27072 5 ide_floppy 23584 0 aec62xx 13500 0 cmd64x 15356 0 generic 5536 0 hpt34x 7040 0 ns87415 6340 0 pdc202xx_new 15836 0 pdc202xx_old 22300 0 sc1200 12776 0 siimage 15712 0 sl82c105 9088 0 trm290 6114 0 via82cxxx 16732 0 mesh 25692 0 usb_storage 84204 0 scsi_mod 113376 2 mesh,usb_storage usbserial 33840 0 usbhid 53952 0 ohci_hcd 26212 0 usbcore 139092 6 usb_storage,usbserial,usbhid,ohci_hcd unix 31992 8
lsmod - custom-rolled 2.6.8 kernel (with :$fakeroot make-kpkg {my version} --added-patches powerpc --initrd kernel_image) Module Size Used by af_packet 21352 2 snd_powermac 41164 0 snd_pcm 116920 1 snd_powermac snd_page_alloc 13480 1 snd_pcm snd_timer 29348 1 snd_pcm snd 64952 3 snd_powermac,snd_pcm,snd_timer soundcore 11812 1 snd mesh 24828 0 scsi_mod 113312 1 mesh ide_cd 49220 0 cdrom 49660 1 ide_cd bmac 17872 0 crc32 4832 1 bmac evdev 11968 0 unix 31992 18
in-kernel config CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_HOTPLUG=y CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y CONFIG_6xx=y CONFIG_ALTIVEC=y CONFIG_TAU=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_PPC_CHRP=y CONFIG_PPC_PMAC=y CONFIG_PPC_PREP=y CONFIG_PPC_OF=y CONFIG_PPCBUG_NVRAM=y CONFIG_HIGHMEM=y CONFIG_KERNEL_ELF=y CONFIG_BINFMT_ELF=y CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_MAC_FLOPPY=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_INITRD=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDEDMA_AUTO=y CONFIG_SCSI_PROC_FS=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_SCSI_LOGGING=y CONFIG_ADB=y CONFIG_ADB_CUDA=y CONFIG_ADB_MACIO=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NET=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_DEV_APPLETALK=y CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_INPUT=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_PSAUX_ENABLE=y CONFIG_SOUND_GAMEPORT=y CONFIG_INPUT_KEYBOARD=y CONFIG_INPUT_MOUSE=y CONFIG_INPUT_MISC=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_NVRAM=y CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y CONFIG_I2C=y CONFIG_I2C_ALGOBIT=y CONFIG_FB=y CONFIG_FB_OF=y CONFIG_FB_ATY_CT=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SND_OSSEMUL=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y CONFIG_HID_FF=y CONFIG_HID_PID=y CONFIG_LOGITECH_FF=y CONFIG_THRUSTMASTER_FF=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_JBD=y CONFIG_FS_MBCACHE=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_NLS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_DEVFS_FS=y CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_HFS_FS=y CONFIG_HFSPLUS_FS=y CONFIG_CRAMFS=y CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_LOCKD_V4=y CONFIG_SMB_NLS_DEFAULT=y CONFIG_PARTITION_ADVANCED=y CONFIG_AMIGA_PARTITION=y CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_ZLIB_INFLATE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_BOOTX_TEXT=y CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MD5=y
I hope this will help d-i/kernel/manual folks to get d-i installing quik
correctly for this type of box.
Ciao - -- Guglielmo
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFBdnX9fi0cgOnlI4wRAo88AJ9xgmtyhxPw6Ez9XkMewR/gsF4rtACfW2eG z1vgHbT6zOJCLRokJ7KQpSM= =a99v -----END PGP SIGNATURE-----
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
