Gianluca wrote: > Salve, > in un sistema debian testing ho queste interfacce: > > eth0 Link encap:Ethernet HWaddr 00:40:33:57:48:C9 > inet addr:192.168.1.254 Bcast:192.168.1.255 Mask:255.255.255.0 > > > eth1 Link encap:Ethernet HWaddr 00:50:FC:04:58:AF > inet addr:83.211.***.*** Bcast:83.211.***.*** > Mask:255.255.255.248 > > eth2 Link encap:Ethernet HWaddr 00:50:FC:04:5A:0F > inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0 > > eth2:0 Link encap:Ethernet HWaddr 00:50:FC:04:5A:0F > inet addr:192.168.0.1 Bcast:192.168.255.255 Mask:255.255.0.0 > > Questa è la tabella di routing: > > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use > Iface > 83.211.***.*** * 255.255.255.248 U 0 0 > 0 eth1 > 10.0.0.0 * 255.255.255.0 U 0 0 > 0 eth2 > 192.168.1.0 * 255.255.255.0 U 0 0 > 0 eth0 > 192.168.0.0 * 255.255.0.0 U 0 0 > 0 eth2 > default 83.211.***.*** 0.0.0.0 UG 0 0 > 0 eth1 > > Il forwarding è impostato: > > cat /proc/sys/net/ipv4/ip_forward > > 1 > > Posso sapere perché un client con ip appartenente alla rete 192.168.1.0 > non riesce a raggiungere nessun client appartenente alle reti > 192.168.0.0 e 10.0.0.0 e viceversa? > > Il firewall contiene solo le impostazioni per il NAT e tutti i client > appartenenti alle varie reti private escono correttamente su internet, > perché tra loro non si vedono? Dove sbaglio? > > Grazie, > Gianluca > > p.s. penso sia chiaro che al posto di *** ci sono i valori corretti. > Non si vedono perchè appunto appartengono a sotto-reti diverse!!!
-- Per REVOCARE l'iscrizione alla lista, inviare un email a [EMAIL PROTECTED] con oggetto "unsubscribe". Per problemi inviare un email in INGLESE a [EMAIL PROTECTED] To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]