Un saluto a tutta la lista. Scusate se invado di nuovo la lista ma ho il "mal di testa" a forza di "sbattere" su questo problema. Allora: Ho una Debian/Etch con kernel 2.6.18-3-i686 Al momento dell'istallazione il wi-fi non funzionava. Ho installato il modulo preso dal reposity "contrib". Ho scaricato il "firmware 3.0" dal sito. Ho seguito alla lettera le idicazioni dell'amico su, http://www.redstarlabs.org/2006/11/21/intel-pro-wireless-ipw2200-su-debian-unstable/ ma il wi-fi funziona a "giorni alterni". Ho provato a postare su "google" la sequenza dell'errore, come avevo gia' fatto in precedenza ma niente :-( Io mi sto studiando i vari "dmesg" e li confronto con il comando "diff" ma non ne vengo a capo. Ho notato che funziona, non sempre ma il piu' delle volte, quando e "spento" l'interuttore posto a lato del portatile e, naturalmente, non riesce a fare nessuna connessione, "accendo" l'interuttore ma niente. Una sola volta, di quelle buone, accendendo l'interuttore e' partita la ricerca automatica. Per il resto e' "lotto" :-) Sapessi almeno dove guardare :-) Nelle ricerche sono finito anche in Giappone dove la lingua mi totalmente ostica :-) Beh! per chi volesse metto in allegato i "dmesg" di quando funziona e no per non intasare gia' questa lunga lettera.
Ciao Genki ):o)) ---------------------------------------------- This message has been scanned for viruses and dangerous content by Jambo MailScanner, and is believed to be clean. --------------------------------------------- "easy access to the world"
Linux version 2.6.18-3-686 (Debian 2.6.18-7) ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffdfffc (usable) BIOS-e820: 000000001ffdfffc - 000000001fffffc0 (ACPI data) BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131039 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126943 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 TOSINV ) @ 0x000e5010 ACPI: RSDT (v001 INSYDE RSDT_000 0x00000100 ABCD 0x00010200) @ 0x1fff89f7 ACPI: FADT (v001 TOSINV FACP_000 0x00000100 0000 0x00010200) @ 0x1ffffb30 ACPI: MCFG (v001 INSYDE MCFG_000 0x30303030 0000 0x30303030) @ 0x1ffffbc0 ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x1fff8be5 ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x1fff8a2b ACPI: DSDT (v001 TOSINV SONOMA 0x00001004 INTL 0x02002036) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000) Detected 1862.182 MHz processor. Built 1 zonelists. Total pages: 131039 Kernel command line: root=/dev/sda3 ro Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0140a000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 512056k/524156k available (1543k kernel code, 11560k reserved, 574k data, 196k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3727.82 BogoMIPS (lpj=7455651) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9f9ff 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 0c20) CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs migration_cost=0 checking if image is initramfs... it is Freeing initrd memory: 4385k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xea8f4, last bus=6 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1300-133f claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs *5 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11 ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode. ACPI: Power Resource [PUT2] (on) ACPI: Power Resource [PFA1] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:06:06.0 PCI: Bridge: 0000:00:01.0 IO window: c000-dfff MEM window: c0000000-cfffffff PREFETCH window: 90000000-9fffffff PCI: Bridge: 0000:00:1c.0 IO window: a000-bfff MEM window: bc000000-bfffffff PREFETCH window: 8c000000-8fffffff PCI: Bridge: 0000:00:1c.1 IO window: 8000-9fff MEM window: b8000000-bbffffff PREFETCH window: 88000000-8bffffff PCI: Bus 7, cardbus bridge: 0000:06:06.0 IO window: 00006000-000060ff IO window: 00006400-000064ff PREFETCH window: 80000000-81ffffff MEM window: b2000000-b3ffffff PCI: Bridge: 0000:00:1e.0 IO window: 6000-7fff MEM window: b0000000-b7ffffff PREFETCH window: 80000000-87ffffff ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1168641809.764:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt for device 0000:00:1e.3 disabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 196k freed Time: tsc clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: Transitioning device [FAN1] to D3 ACPI: Transitioning device [FAN1] to D3 ACPI: Fan [FAN1] (off) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x1 Time: acpi_pm clocksource has been installed. ACPI: Thermal Zone [TZCR] (50 C) ACPI: Thermal Zone [TZVR] (50 C) ACPI: Thermal Zone [TZVL] (50 C) ACPI: Thermal Zone [TZCL] (41 C) usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected SCSI subsystem initialized libata version 2.00 loaded. ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001260 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14 scsi0 : ata_piix ata1.00: ATA-6, max UDMA/100, 156301488 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.00: applying bridge limits ata1.00: configured for UDMA/100 Vendor: ATA Model: FUJITSU MHV2080A Rev: 0040 Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 scsi1 : ata_piix ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 Vendor: MATSHITA Model: DVD-RAM UJ-831S Rev: 1.40 Type: CD-ROM ANSI SCSI revision: 05 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6 PCI: setting IRQ 6 as level-triggered ACPI: PCI Interrupt 0000:06:06.2[C] -> Link [LNKG] -> GSI 6 (level, low) -> IRQ 6 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[6] MMIO=[b0000000-b00007ff] Max Packet=[2048] IR/IT contexts=[4/8] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3 sd 0:0:0:0: Attached scsi disk sda Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. irq 11: nobody cared (try booting with the "irqpoll" option) [<c014037f>] __report_bad_irq+0x2b/0x69 [<c014056c>] note_interrupt+0x1af/0x1e7 [<e086349e>] usb_hcd_irq+0x23/0x50 [usbcore] [<c013fb83>] handle_IRQ_event+0x23/0x49 [<c013fc5c>] __do_IRQ+0xb3/0xe8 [<c01050e5>] do_IRQ+0x43/0x52 [<c01036b6>] common_interrupt+0x1a/0x20 [<c013fb77>] handle_IRQ_event+0x17/0x49 [<c013fc3c>] __do_IRQ+0x93/0xe8 [<c01050e5>] do_IRQ+0x43/0x52 [<c01036b6>] common_interrupt+0x1a/0x20 [<c02810a0>] _spin_unlock_irqrestore+0x8/0x9 [<e08897db>] ohci_devctl+0x5a/0x55a [ohci1394] [<e08e2ff9>] csr1212_generate_csr_image+0x309/0x35c [ieee1394] [<e08db01c>] hpsb_reset_bus+0x1c/0x22 [ieee1394] [<c012ac30>] run_workqueue+0x78/0xb5 [<e08dcbfd>] delayed_reset_bus+0x0/0xc9 [ieee1394] [<c012b51a>] worker_thread+0xd9/0x10b [<c0117778>] default_wake_function+0x0/0xc [<c012b441>] worker_thread+0x0/0x10b [<c012d893>] kthread+0xc2/0xef [<c012d7d1>] kthread+0x0/0xef [<c0101005>] kernel_thread_helper+0x5/0xb handlers: [<e086347b>] (usb_hcd_irq+0x0/0x50 [usbcore]) [<e086347b>] (usb_hcd_irq+0x0/0x50 [usbcore]) [<e086347b>] (usb_hcd_irq+0x0/0x50 [usbcore]) Disabling IRQ #11 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d1221d56] eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v1.5 addr 0xbc000000 irq 11 Yukon-EC (0xb6) rev 1 sky2 eth1: addr 00:a0:d1:22:1d:56 Linux agpgart interface v0.101 (c) Dave Jones sky2 0000:02:00.0: No interrupt generated using MSI, switching to INTx mode. agpgart: Detected an Intel 915GM Chipset. agpgart: AGP aperture is 256M @ 0x0 intel_rng: FWH not detected Yenta: CardBus bridge found at 0000:06:06.0 [1179:ff10] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b22, devctl 0x66 input: PC Speaker as /class/input/input1 sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman Yenta TI: socket 0000:06:06.0 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:06:06.0 falling back to parallel PCI interrupts slamr: module license 'Smart Link Ltd.' taints kernel. slamr: SmartLink AMRMO modem. Real Time Clock Driver v1.12ac parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Yenta TI: socket 0000:06:06.0 no PCI interrupts. Fish. Please report. Yenta: no PCI IRQ, CardBus support disabled for this socket. Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings. irda_init() NET: Registered protocol family 23 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> Yenta: ISA IRQ mask 0x0018, PCI irq 0 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a pcmcia: parent PCI bridge I/O window: 0x6000 - 0x7fff cs: IO port probe 0x6000-0x7fff: clean. pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb7ffffff pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0) ACPI: PCI Interrupt 0000:06:06.4[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 mmc0: SDHCI at 0xb000a000 irq 11 DMA mmc1: SDHCI at 0xb000a100 irq 11 DMA mmc2: SDHCI at 0xb000a200 irq 11 DMA slamr: probe 8086:266d ICH4 card... PCI: Enabling device 0000:00:1e.3 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1e.3 to 64 slamr: mc97 codec is SIL27 slamr: slamr0 is ICH4 card. ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0mq ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:06:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0 input: SynPS/2 Synaptics TouchPad as /class/input/input2 cs: IO port probe 0x100-0x3af: excluding 0x118-0x11f 0x300-0x307 0x310-0x31f 0x370-0x37f cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. ts: Compaq touchscreen protocol output ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Unable to initialize device after 5 attempts. ipw2200: failed to register network device ACPI: PCI interrupt for device 0000:06:04.0 disabled ipw2200: probe of 0000:06:04.0 failed with error -5 ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1e.2 to 64 intel8x0_measure_ac97_clock: measured 55483 usecs intel8x0: clocking to 48000 Adding 867468k swap on /dev/sda8. Priority:-1 extents:1 across:867468k EXT3 FS on sda3, internal journal loop: loaded (max 8 devices) ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.27 [Flags: R/W MODULE]. NTFS volume version 3.1. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. sky2 eth0: enabling interface ACPI: Battery Slot [BAT1] (battery present) ACPI: AC Adapter [AC] (off-line) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Power Button (CM) [PWRB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.25.0 20060524 on minor 0 powernow: This module only works with AMD K7 CPUs acpi-cpufreq: CPU0 - ACPI performance management activated. [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs usb 1-2: new low speed USB device using uhci_hcd and address 2 usb 1-2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Logitech Optical USB Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Linux version 2.6.18-3-686 (Debian 2.6.18-7) ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffdfffc (usable) BIOS-e820: 000000001ffdfffc - 000000001fffffc0 (ACPI data) BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131039 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126943 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 TOSINV ) @ 0x000e5010 ACPI: RSDT (v001 INSYDE RSDT_000 0x00000100 ABCD 0x00010200) @ 0x1fff89f7 ACPI: FADT (v001 TOSINV FACP_000 0x00000100 0000 0x00010200) @ 0x1ffffb30 ACPI: MCFG (v001 INSYDE MCFG_000 0x30303030 0000 0x30303030) @ 0x1ffffbc0 ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x1fff8be5 ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x1fff8a2b ACPI: DSDT (v001 TOSINV SONOMA 0x00001004 INTL 0x02002036) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000) Detected 1862.050 MHz processor. Built 1 zonelists. Total pages: 131039 Kernel command line: root=/dev/sda3 ro Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0140a000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 512056k/524156k available (1543k kernel code, 11560k reserved, 574k data, 196k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3727.82 BogoMIPS (lpj=7455655) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9f9ff 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 0c20) CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs migration_cost=0 checking if image is initramfs... it is Freeing initrd memory: 4385k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xea8f4, last bus=6 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1300-133f claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs *5 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11 ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode. ACPI: Power Resource [PUT2] (on) ACPI: Power Resource [PFA1] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:06:06.0 PCI: Bridge: 0000:00:01.0 IO window: c000-dfff MEM window: c0000000-cfffffff PREFETCH window: 90000000-9fffffff PCI: Bridge: 0000:00:1c.0 IO window: a000-bfff MEM window: bc000000-bfffffff PREFETCH window: 8c000000-8fffffff PCI: Bridge: 0000:00:1c.1 IO window: 8000-9fff MEM window: b8000000-bbffffff PREFETCH window: 88000000-8bffffff PCI: Bus 7, cardbus bridge: 0000:06:06.0 IO window: 00006000-000060ff IO window: 00006400-000064ff PREFETCH window: 80000000-81ffffff MEM window: b2000000-b3ffffff PCI: Bridge: 0000:00:1e.0 IO window: 6000-7fff MEM window: b0000000-b7ffffff PREFETCH window: 80000000-87ffffff ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1168641138.760:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt for device 0000:00:1e.3 disabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI No-Shortcut mode Time: tsc clocksource has been installed. ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 196k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: Transitioning device [FAN1] to D3 ACPI: Transitioning device [FAN1] to D3 ACPI: Fan [FAN1] (off) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x1 Time: acpi_pm clocksource has been installed. ACPI: Thermal Zone [TZCR] (56 C) ACPI: Thermal Zone [TZVR] (37 C) ACPI: Thermal Zone [TZVL] (38 C) ACPI: Thermal Zone [TZCL] (38 C) usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected SCSI subsystem initialized libata version 2.00 loaded. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001260 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14 scsi0 : ata_piix ata1.00: ATA-6, max UDMA/100, 156301488 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.00: applying bridge limits ata1.00: configured for UDMA/100 Vendor: ATA Model: FUJITSU MHV2080A Rev: 0040 Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 scsi1 : ata_piix ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 Vendor: MATSHITA Model: DVD-RAM UJ-831S Rev: 1.40 Type: CD-ROM ANSI SCSI revision: 05 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6 PCI: setting IRQ 6 as level-triggered ACPI: PCI Interrupt 0000:06:06.2[C] -> Link [LNKG] -> GSI 6 (level, low) -> IRQ 6 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[6] MMIO=[b0000000-b00007ff] Max Packet=[2048] IR/IT contexts=[4/8] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3 sd 0:0:0:0: Attached scsi disk sda Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. irq 11: nobody cared (try booting with the "irqpoll" option) [<c014037f>] __report_bad_irq+0x2b/0x69 [<c014056c>] note_interrupt+0x1af/0x1e7 [<e086349e>] usb_hcd_irq+0x23/0x50 [usbcore] [<c013fb83>] handle_IRQ_event+0x23/0x49 [<c013fc5c>] __do_IRQ+0xb3/0xe8 [<c01050e5>] do_IRQ+0x43/0x52 [<c01036b6>] common_interrupt+0x1a/0x20 [<c013fb77>] handle_IRQ_event+0x17/0x49 [<c013fc3c>] __do_IRQ+0x93/0xe8 [<c01050e5>] do_IRQ+0x43/0x52 [<c01036b6>] common_interrupt+0x1a/0x20 [<c02810a0>] _spin_unlock_irqrestore+0x8/0x9 [<e08897db>] ohci_devctl+0x5a/0x55a [ohci1394] [<e08e2ff9>] csr1212_generate_csr_image+0x309/0x35c [ieee1394] [<e08db01c>] hpsb_reset_bus+0x1c/0x22 [ieee1394] [<c012ac30>] run_workqueue+0x78/0xb5 [<e08dcbfd>] delayed_reset_bus+0x0/0xc9 [ieee1394] [<c012b51a>] worker_thread+0xd9/0x10b [<c0117778>] default_wake_function+0x0/0xc [<c012b441>] worker_thread+0x0/0x10b [<c012d893>] kthread+0xc2/0xef [<c012d7d1>] kthread+0x0/0xef [<c0101005>] kernel_thread_helper+0x5/0xb handlers: [<e086347b>] (usb_hcd_irq+0x0/0x50 [usbcore]) [<e086347b>] (usb_hcd_irq+0x0/0x50 [usbcore]) [<e086347b>] (usb_hcd_irq+0x0/0x50 [usbcore]) Disabling IRQ #11 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d1221d56] eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: AGP aperture is 256M @ 0x0 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v1.5 addr 0xbc000000 irq 11 Yukon-EC (0xb6) rev 1 sky2 eth1: addr 00:a0:d1:22:1d:56 sky2 0000:02:00.0: No interrupt generated using MSI, switching to INTx mode. intel_rng: FWH not detected input: PC Speaker as /class/input/input1 Yenta: CardBus bridge found at 0000:06:06.0 [1179:ff10] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b22, devctl 0x66 sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman Real Time Clock Driver v1.12ac ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> slamr: module license 'Smart Link Ltd.' taints kernel. slamr: SmartLink AMRMO modem. parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Yenta TI: socket 0000:06:06.0 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:06:06.0 falling back to parallel PCI interrupts ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0mq ipw2200: Copyright(c) 2003-2006 Intel Corporation irda_init() NET: Registered protocol family 23 Yenta TI: socket 0000:06:06.0 no PCI interrupts. Fish. Please report. Yenta: no PCI IRQ, CardBus support disabled for this socket. Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings. Yenta: ISA IRQ mask 0x0018, PCI irq 0 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a pcmcia: parent PCI bridge I/O window: 0x6000 - 0x7fff cs: IO port probe 0x6000-0x7fff: clean. pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb7ffffff pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0) ACPI: PCI Interrupt 0000:06:06.4[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 mmc0: SDHCI at 0xb000a000 irq 11 DMA mmc1: SDHCI at 0xb000a100 irq 11 DMA mmc2: SDHCI at 0xb000a200 irq 11 DMA slamr: probe 8086:266d ICH4 card... PCI: Enabling device 0000:00:1e.3 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1e.3 to 64 slamr: mc97 codec is SIL27 slamr: slamr0 is ICH4 card. ACPI: PCI Interrupt 0000:06:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1e.2 to 64 cs: IO port probe 0x100-0x3af: excluding 0x118-0x11f 0x300-0x307 0x310-0x31f 0x370-0x37f cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0 input: SynPS/2 Synaptics TouchPad as /class/input/input2 ts: Compaq touchscreen protocol output intel8x0_measure_ac97_clock: measured 55461 usecs intel8x0: clocking to 48000 Adding 867468k swap on /dev/sda8. Priority:-1 extents:1 across:867468k EXT3 FS on sda3, internal journal loop: loaded (max 8 devices) ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.27 [Flags: R/W MODULE]. NTFS volume version 3.1. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. sky2 eth0: enabling interface ACPI: Battery Slot [BAT1] (battery present) ACPI: AC Adapter [AC] (off-line) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Power Button (CM) [PWRB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver eth2: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.25.0 20060524 on minor 0 powernow: This module only works with AMD K7 CPUs acpi-cpufreq: CPU0 - ACPI performance management activated. [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs eth2: no IPv6 routers present usb 1-1: new low speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Logitech Optical USB Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver
