On 22 Mag, 17:30, Giovanni Mascellani <[EMAIL PROTECTED]> wrote: > All'incirca 21 May 2007 23:43:52 -0700, stefanocalosso > <[EMAIL PROTECTED]> sembrerebbe aver scritto: > > > > > ~$ dmesg > > host=0, driver=08 > > sd: Current: sense key: Hardware Error > > Additional sense: Logical unit failure > > sdb: test WP failed, assume Write Enabled > > sdb: assuming drive cache: write through > > sdb: unable to read partition table > > [...] > > Ahi ahi ahi, vedo ora questo output e non mi conforta neanche un po'. > Ignora il messaggio che ho mandato poco fa, evidentemente il problema > non è quello. Ed evita anche di mettere la tua pennina in fstab, se vuoi > usarla dinamicamente quella è una pessima soluzione.
perche? rischio di fare dei danni? > > Potresti controllare se ricevi tutta questa caterva di errori anche su > altri sistemi, per esempio su Ubuntu, questo e l'output di dmesg dalla ubuntu di un mio amico... ~$ dmesg [ 0.000000] Linux version 2.6.20-15-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4 [ 0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5320 [ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 131056 [ 0.000000] HighMem 131056 -> 131056 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 131056 [ 0.000000] On node 0 totalpages: 131056 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 991 pages used for memmap [ 0.000000] Normal zone: 125969 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 IntelR ) @ 0x000f8e20 [ 0.000000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 [ 0.000000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff30c0 [ 0.000000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff6f00 [ 0.000000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:3 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:3 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.000000] Detected 2992.744 MHz processor. [ 15.583860] Built 1 zonelists. Total pages: 130033 [ 15.583864] Kernel command line: root=UUID=65004956-f514-4a45- bd54-26d9965554df ro quiet splash [ 15.584019] mapped APIC to ffffd000 (fee00000) [ 15.584022] mapped IOAPIC to ffffc000 (fec00000) [ 15.584025] Enabling fast FPU save and restore... done. [ 15.584028] Enabling unmasked SIMD FPU exception support... done. [ 15.584038] Initializing CPU#0 [ 15.584104] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 15.585393] Console: colour VGA+ 80x25 [ 15.585626] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 15.585825] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 15.593735] Memory: 508736k/524224k available (1992k kernel code, 14968k reserved, 893k data, 328k init, 0k highmem) [ 15.593745] virtual kernel memory layout: [ 15.593746] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 15.593747] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 15.593748] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 15.593750] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 15.593751] .init : 0xc03d7000 - 0xc0429000 ( 328 kB) [ 15.593752] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB) [ 15.593753] .text : 0xc0100000 - 0xc02f2264 (1992 kB) [ 15.593756] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 15.672071] Calibrating delay using timer specific routine.. 5990.08 BogoMIPS (lpj=11980164) [ 15.672112] Security Framework v1.0.0 initialized [ 15.672117] SELinux: Disabled at boot. [ 15.672134] Mount-cache hash table entries: 512 [ 15.672272] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 [ 15.672281] monitor/mwait feature present. [ 15.672283] using mwait in idle threads. [ 15.672289] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 15.672292] CPU: L2 cache: 1024K [ 15.672295] CPU: Physical Processor ID: 0 [ 15.672297] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000041d 00000000 00000000 [ 15.672308] Compat vDSO mapped to ffffe000. [ 15.672312] Remapping vsyscall page to ffffe000 [ 15.672327] Checking 'hlt' instruction... OK. [ 15.688151] SMP alternatives: switching to UP code [ 15.688468] Early unpacking initramfs... done [ 15.959316] ACPI: Core revision 20060707 [ 15.960017] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 15.965233] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [ 15.965257] SMP alternatives: switching to SMP code [ 15.965357] Booting processor 1/1 eip 3000 [ 15.975658] Initializing CPU#1 [ 16.055906] Calibrating delay using timer specific routine.. 5985.85 BogoMIPS (lpj=11971706) [ 16.055919] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 [ 16.055926] monitor/mwait feature present. [ 16.055933] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 16.055936] CPU: L2 cache: 1024K [ 16.055939] CPU: Physical Processor ID: 0 [ 16.055941] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000041d 00000000 00000000 [ 16.056216] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [ 16.056259] Total of 2 processors activated (11975.93 BogoMIPS). [ 16.056388] ENABLING IO-APIC IRQs [ 16.056569] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 16.203852] checking TSC synchronization across 2 CPUs: passed. [ 0.003998] Brought up 2 CPUs [ 0.118765] migration_cost=115 [ 0.119077] Booting paravirtualized kernel on bare hardware [ 0.119164] Time: 6:07:04 Date: 04/18/107 [ 0.119196] NET: Registered protocol family 16 [ 0.119294] EISA bus registered [ 0.119299] ACPI: bus type pci registered [ 0.120597] PCI: PCI BIOS revision 2.10 entry at 0xfae10, last bus=2 [ 0.120600] PCI: Using configuration type 1 [ 0.120602] Setting up standard PCI resources [ 0.137368] ACPI: Interpreter enabled [ 0.137373] ACPI: Using IOAPIC for interrupt routing [ 0.137985] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.137994] PCI: Probing PCI hardware (bus 00) [ 0.138621] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/ TCO [ 0.138625] PCI quirk: region 0480-04bf claimed by ICH4 GPIO [ 0.138818] Boot video device is 0000:01:00.0 [ 0.139083] PCI: Transparent bridge - 0000:00:1e.0 [ 0.139112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.145669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.149565] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.149834] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.150099] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.150365] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.150627] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.150893] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.151156] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.151425] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.151698] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.151709] pnp: PnP ACPI init [ 0.155288] pnp: PnP ACPI: found 14 devices [ 0.155293] PnPBIOS: Disabled by ACPI PNP [ 0.155357] PCI: Using ACPI for IRQ routing [ 0.155361] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.169636] NET: Registered protocol family 8 [ 0.169639] NET: Registered protocol family 20 [ 0.170048] pnp: 00:0c: ioport range 0x400-0x4bf could not be reserved [ 0.170432] PCI: Bridge: 0000:00:01.0 [ 0.170436] IO window: c000-cfff [ 0.170441] MEM window: fc000000-fc0fffff [ 0.170445] PREFETCH window: f8000000-fbffffff [ 0.170450] PCI: Bridge: 0000:00:1e.0 [ 0.170453] IO window: d000-dfff [ 0.170459] MEM window: fc100000-fc1fffff [ 0.170463] PREFETCH window: 30000000-300fffff [ 0.170481] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.170514] NET: Registered protocol family 2 [ 0.223966] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.224057] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.224132] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.224166] TCP: Hash tables configured (established 16384 bind 8192) [ 0.224169] TCP reno registered [ 0.240021] checking if image is initramfs... it is [ 0.778682] Freeing initrd memory: 6750k freed [ 0.779349] audit: initializing netlink socket (disabled) [ 0.779364] audit(1179468424.480:1): initialized [ 0.779557] VFS: Disk quotas dquot_6.5.1 [ 0.779578] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.779631] io scheduler noop registered [ 0.779634] io scheduler anticipatory registered [ 0.779637] io scheduler deadline registered [ 0.779665] io scheduler cfq registered (default) [ 0.779955] isapnp: Scanning for PnP cards... [ 1.133427] isapnp: No Plug & Play device found [ 1.161678] Real Time Clock Driver v1.12ac [ 1.161738] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.161857] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.161991] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.162587] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.162833] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.163090] mice: PS/2 mouse device common for all mice [ 1.163791] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.163959] input: Macintosh mouse button emulation as /class/input/ input0 [ 1.164002] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.164007] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.164259] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.166605] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.166611] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.166734] EISA: Probing bus 0 at eisa.0 [ 1.166777] EISA: Detected 0 cards. [ 1.196858] TCP cubic registered [ 1.196867] NET: Registered protocol family 1 [ 1.196895] Starting balanced_irq [ 1.196905] Using IPI No-Shortcut mode [ 1.196991] input: AT Translated Set 2 keyboard as /class/input/ input1 [ 1.197083] ACPI: (supports S0 S1 S4 S5) [ 1.197141] Magic number: 7:45:115 [ 1.197475] Freeing unused kernel memory: 328k freed [ 1.199478] Time: tsc clocksource has been installed. [ 2.419203] Capability LSM initialized [ 2.459013] ACPI: Fan [FAN] (on) [ 2.464806] ACPI: Thermal Zone [THRM] (29 C) [ 2.941283] SCSI subsystem initialized [ 2.981101] libata version 2.20 loaded. [ 3.020998] ata_piix 0000:00:1f.1: version 2.10ac1 [ 3.021021] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16 [ 3.021044] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 3.021106] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 [ 3.021146] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 [ 3.021168] scsi0 : ata_piix [ 3.024240] usbcore: registered new interface driver usbfs [ 3.024297] usbcore: registered new interface driver hub [ 3.024365] usbcore: registered new device driver usb [ 3.073171] USB Universal Host Controller Interface driver v3.0 [ 3.119054] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.120792] Floppy drive(s): fd0 is 1.44M [ 3.141842] FDC 0 is a post-1991 82077 [ 3.195000] ata1.00: ata_hpa_resize 1: sectors = 320170943, hpa_sectors = 320173056 [ 3.195006] ata1.00: Host Protected Area detected. [ 3.195007] current size : 320170943 sectors (163927 MB) [ 3.195009] native size : 320173056 sectors (163928 MB) [ 3.234787] ata1.00: Native size increased to 320173056 sectors [ 3.234791] ata1.00: ATA-7: Maxtor 6Y160P0, YAR41BW0, max UDMA/133 [ 3.234794] ata1.00: 320173056 sectors, multi 16: LBA48 [ 3.236374] ata1.01: ata_hpa_resize 1: sectors = 586114704, hpa_sectors = 586114704 [ 3.236378] ata1.01: ATA-7: Maxtor 6L300R0, BAJ41G20, max UDMA/133 [ 3.236381] ata1.01: 586114704 sectors, multi 16: LBA48 [ 3.242959] ata1.00: ata_hpa_resize 1: sectors = 320173056, hpa_sectors = 320173056 [ 3.242962] ata1.00: configured for UDMA/133 [ 3.252327] ata1.01: ata_hpa_resize 1: sectors = 586114704, hpa_sectors = 586114704 [ 3.252330] ata1.01: configured for UDMA/133 [ 3.252343] scsi1 : ata_piix [ 3.570641] ata2.00: ATAPI, max UDMA/33 [ 3.734572] ata2.00: configured for UDMA/33 [ 3.734720] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y160P0 YAR4 PQ: 0 ANSI: 5 [ 3.734883] scsi 0:0:1:0: Direct-Access ATA Maxtor 6L300R0 BAJ4 PQ: 0 ANSI: 5 [ 3.735680] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS- H552U US02 PQ: 0 ANSI: 5 [ 3.736083] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 3.736103] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.736109] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.736262] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.736294] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000e300 [ 3.736447] usb usb1: configuration #1 chosen from 1 choice [ 3.736489] hub 1-0:1.0: USB hub found [ 3.736499] hub 1-0:1.0: 2 ports detected [ 3.746884] SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) [ 3.746906] sda: Write Protect is off [ 3.746910] sda: Mode Sense: 00 3a 00 00 [ 3.746942] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.747046] SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) [ 3.747067] sda: Write Protect is off [ 3.747071] sda: Mode Sense: 00 3a 00 00 [ 3.747107] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.747114] sda: sda1 sda2 < sda5 sda6 > [ 3.785214] sd 0:0:0:0: Attached scsi disk sda [ 3.785294] SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB) [ 3.785312] sdb: Write Protect is off [ 3.785316] sdb: Mode Sense: 00 3a 00 00 [ 3.785345] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.785418] SCSI device sdb: 586114704 512-byte hdwr sectors (300091 MB) [ 3.785434] sdb: Write Protect is off [ 3.785438] sdb: Mode Sense: 00 3a 00 00 [ 3.785464] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.785469] sdb: sdb1 < sdb5 > [ 3.805636] sd 0:0:1:0: Attached scsi disk sdb [ 3.811896] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.811931] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 3.811958] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 3.820451] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray [ 3.820460] Uniform CD-ROM driver Revision: 3.20 [ 3.820751] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.838559] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 3.838599] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.838607] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.838643] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.838674] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e000 [ 3.838847] usb usb2: configuration #1 chosen from 1 choice [ 3.838891] hub 2-0:1.0: USB hub found [ 3.838905] hub 2-0:1.0: 2 ports detected [ 3.942519] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16 [ 3.942537] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.942543] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.942578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.942611] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000e100 [ 3.942755] usb usb3: configuration #1 chosen from 1 choice [ 3.942813] hub 3-0:1.0: USB hub found [ 3.942826] hub 3-0:1.0: 2 ports detected [ 4.046398] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17 [ 4.046414] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 4.046420] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 4.046458] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 4.046486] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000e200 [ 4.046636] usb usb4: configuration #1 chosen from 1 choice [ 4.046687] hub 4-0:1.0: USB hub found [ 4.046700] hub 4-0:1.0: 2 ports detected [ 4.132794] Attempting manual resume [ 4.132799] swsusp: Resume From Partition 8:5 [ 4.132801] PM: Checking swsusp image. [ 4.141306] PM: Resume from disk failed. [ 4.150425] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 [ 4.150448] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.150454] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.150489] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 4.150528] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 4.150540] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc200000 [ 4.154438] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.154564] usb usb5: configuration #1 chosen from 1 choice [ 4.154606] hub 5-0:1.0: USB hub found [ 4.154617] hub 5-0:1.0: 8 ports detected [ 4.183392] kjournald starting. Commit interval 5 seconds [ 4.183423] EXT3-fs: mounted filesystem with ordered data mode. [ 4.258312] 8139cp 0000:02:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 4.258318] 8139cp 0000:02:0b.0: Try the "8139too" driver instead. [ 4.259986] 8139too Fast Ethernet driver 0.9.28 [ 4.260032] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 4.260314] eth0: RealTek RTL8139 at 0xe0848000, 00:13:d3:99:e2:d0, IRQ 19 [ 4.260317] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 12.670237] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 12.962863] NET: Registered protocol family 10 [ 12.962997] lo: Disabled Privacy Extensions [ 13.929141] Linux agpgart interface v0.102 (c) Dave Jones [ 13.931884] agpgart: Detected an Intel 865 Chipset. [ 13.935771] agpgart: AGP aperture is 64M @ 0xf4000000 [ 13.976959] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.992318] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.081690] iTCO_vendor_support: vendor-support=0 [ 14.083262] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11- Nov-2006) [ 14.083386] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460) [ 14.083439] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.118532] input: PC Speaker as /class/input/input2 [ 14.155282] intel_rng: FWH not detected [ 14.634508] gameport: EMU10K1 is pci0000:02:02.1/gameport0, io 0xd100, speed 1147kHz [ 14.815465] parport: PnPBIOS parport detected. [ 14.815518] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 14.976721] input: PS2++ Logitech Wheel Mouse as /class/input/ input3 [ 15.098561] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 16 [ 15.102816] Installing spdif_bug patch: Audigy 1 ES [SB0160] [ 15.293525] lp0: using parport0 (interrupt-driven). [ 15.326315] Adding 1734980k swap on /dev/disk/by-uuid/e5d39567- baf6-4a37-9a5f-0bdb90246284. Priority:-1 extents:1 across:1734980k [ 15.421818] EXT3 FS on sda1, internal journal [ 15.625771] kjournald starting. Commit interval 5 seconds [ 15.626039] EXT3 FS on sda6, internal journal [ 15.626045] EXT3-fs: mounted filesystem with ordered data mode. [ 15.655758] kjournald starting. Commit interval 5 seconds [ 15.657115] EXT3 FS on sdb5, internal journal [ 15.657122] EXT3-fs: mounted filesystem with ordered data mode. [ 16.981064] NET: Registered protocol family 17 [ 21.077035] input: Power Button (FF) as /class/input/input4 [ 21.077073] ACPI: Power Button (FF) [PWRF] [ 21.077134] input: Power Button (CM) as /class/input/input5 [ 21.077169] ACPI: Power Button (CM) [PWRB] [ 21.158017] Using specific hotkey driver [ 21.200060] No dock devices found. [ 21.257950] ibm_acpi: ec object not found [ 21.384316] pcc_acpi: loading... [ 23.381898] eth0: no IPv6 routers present [ 26.100789] ppdev: user-space parallel port driver [ 26.278009] [drm] Initialized drm 1.1.0 20060810 [ 26.287225] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 26.288158] [drm] Initialized r128 2.5.0 20030725 on minor 0 [ 26.290286] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 26.290701] agpgart: Device is in legacy mode, falling back to 2.x [ 26.291051] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode [ 26.291943] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [ 26.927224] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 26.927232] apm: disabled - APM is not SMP safe. [ 27.153415] Bluetooth: Core ver 2.11 [ 27.153495] NET: Registered protocol family 31 [ 27.153499] Bluetooth: HCI device and connection manager initialized [ 27.153503] Bluetooth: HCI socket layer initialized [ 27.168848] Bluetooth: L2CAP ver 2.8 [ 27.168855] Bluetooth: L2CAP socket layer initialized [ 27.353606] Bluetooth: RFCOMM socket layer initialized [ 27.353624] Bluetooth: RFCOMM TTY layer initialized [ 27.353628] Bluetooth: RFCOMM ver 1.8 [114155.839473] ISO 9660 Extensions: Microsoft Joliet Level 3 [114155.868395] ISOFS: changing to secondary root [318969.887723] ISO 9660 Extensions: Microsoft Joliet Level 3 [318969.888198] ISOFS: changing to secondary root [391514.179520] usb 5-6: new high speed USB device using ehci_hcd and address 2 [391514.326243] usb 5-6: configuration #1 chosen from 1 choice [391514.933809] usbcore: registered new interface driver libusual [391514.995319] Initializing USB Mass Storage driver... [391514.995425] scsi2 : SCSI emulation for USB Mass Storage devices [391514.995506] usbcore: registered new interface driver usb-storage [391514.995511] USB Mass Storage support registered. [391514.995790] usb-storage: device found at 2 [391514.995793] usb-storage: waiting for device to settle before scanning [391519.993151] usb-storage: device scan complete [391519.994025] scsi 2:0:0:0: Direct-Access Swissbit Victorinox 2.0 2.00 PQ: 0 ANSI: 2 [391524.155479] ready [391524.155975] SCSI device sdc: 4065280 512-byte hdwr sectors (2081 MB) [391524.156596] sdc: Write Protect is off [391524.156601] sdc: Mode Sense: 03 00 00 00 [391524.156605] sdc: assuming drive cache: write through [391524.158720] SCSI device sdc: 4065280 512-byte hdwr sectors (2081 MB) [391524.159345] sdc: Write Protect is off [391524.159349] sdc: Mode Sense: 03 00 00 00 [391524.159353] sdc: assuming drive cache: write through [391524.159358] sdc: sdc1 [391524.160312] sd 2:0:0:0: Attached scsi removable disk sdc [391524.160379] sd 2:0:0:0: Attached scsi generic sg3 type 0 > Per il resto non so perché GNOME si rifiuti di montarla, visto che mi > sembra che hai detto che anche pmount ce la fa (soluzione che ti > consiglio se non trovi di meglio). Ma una volta che pmount ha montato, > GNOME te la vede? Certo, benissimo...
