Hi there,
some weeks ago my Handspring Visor stopped syncing with KPilot. I assume
it happend, when I switched to newer udev which kicked out hotplug from
my Debian testing. I hoped the next update would fix it, but it didn't
up to today.
Whenever I press the hotsync-button Kpilot shows 30% of
hotsync-completion and the Visor will show a message like "The
connection between your handheld computer and the desktop was lost. Some
of your data was NOT backed up ...". Non of the conduits are being run.
From syslog I can see, that visor is being disconnected right after
connection is successfully processed. But I can't figure why?
I use
- kdepim/kpilot 4:3.5.5.dfsg.1-1
- udev 0.100-2.3
- hotplug not installed
The syslog with udev_log="debug" is attached. Also kpilot-log.
Any ideas?
Marc
Nov 26 17:30:13 localhost kernel: hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0002
Nov 26 17:30:13 localhost kernel: ehci_hcd 0000:00:02.2: GetStatus port 1
status 001803 POWER sig=j CSC CONNECT
Nov 26 17:30:13 localhost kernel: hub 3-0:1.0: port 1, status 0501, change
0001, 480 Mb/s
Nov 26 17:30:13 localhost kernel: hub 3-0:1.0: debounce: port 1: total 100ms
stable 100ms status 0x501
Nov 26 17:30:13 localhost kernel: ehci_hcd 0000:00:02.2: port 1 full speed -->
companion
Nov 26 17:30:13 localhost kernel: ehci_hcd 0000:00:02.2: GetStatus port 1
status 003001 POWER OWNER sig=se0 CONNECT
Nov 26 17:30:13 localhost kernel: hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
Nov 26 17:30:13 localhost kernel: ohci_hcd 0000:00:02.0: GetStatus
roothub.portstatus [0] = 0x00010101 CSC PPS CCS
Nov 26 17:30:13 localhost kernel: hub 1-0:1.0: port 1, status 0101, change
0001, 12 Mb/s
Nov 26 17:30:13 localhost kernel: hub 1-0:1.0: debounce: port 1: total 100ms
stable 100ms status 0x101
Nov 26 17:30:13 localhost kernel: ohci_hcd 0000:00:02.0: GetStatus
roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Nov 26 17:30:13 localhost kernel: usb 1-1: new full speed USB device using
ohci_hcd and address 5
Nov 26 17:30:13 localhost kernel: ohci_hcd 0000:00:02.0: GetStatus
roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Nov 26 17:30:13 localhost kernel: usb 1-1: ep0 maxpacket = 16
Nov 26 17:30:13 localhost kernel: usb 1-1: default language 0x0409
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1734 forked, pid
[5594], 'add' 'usb', 0 seconds old
Nov 26 17:30:13 localhost kernel: usb 1-1: new device strings: Mfr=1,
Product=2, SerialNumber=0
Nov 26 17:30:13 localhost kernel: usb 1-1: Product: Handspring Visor
Nov 26 17:30:13 localhost kernel: usb 1-1: Manufacturer: Handspring Inc
Nov 26 17:30:13 localhost kernel: usb 1-1: uevent
Nov 26 17:30:13 localhost kernel: usb 1-1: configuration #1 chosen from 1 choice
Nov 26 17:30:13 localhost udevd-event[5594]: wait_for_sysfs: file
'/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/bus' appeared after 0 loops
Nov 26 17:30:13 localhost udevd-event[5594]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost kernel: usb 1-1: adding 1-1:1.0 (config #1, interface
0)
Nov 26 17:30:13 localhost kernel: usb 1-1:1.0: uevent
Nov 26 17:30:13 localhost kernel: drivers/usb/core/inode.c: creating file '005'
Nov 26 17:30:13 localhost kernel: hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
Nov 26 17:30:13 localhost udevd-event[5594]: pass_env_to_socket: passed 202
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5594]: udev_event_run: seq 1734 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1734, pid [5594] exit
with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1735 forked, pid
[5595], 'add' 'usb', 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5595]: wait_for_sysfs: file
'/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/bus' appeared after 0
loops
Nov 26 17:30:13 localhost udevd-event[5595]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5595]: run_program: '/sbin/modprobe
usb:v082Dp0100d0100dc00dsc00dp00icFFisc00ip00'
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1737 forked, pid
[5597], 'add' 'module', 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1738 forked, pid
[5598], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: usbcore: registered new driver usbserial
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1739 forked, pid
[5599], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial
support registered for generic
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1740 forked, pid
[5600], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: usbserial_generic 1-1:1.0: usb_probe_interface
Nov 26 17:30:13 localhost kernel: usbserial_generic 1-1:1.0:
usb_probe_interface - got id
Nov 26 17:30:13 localhost kernel: usbcore: registered new driver
usbserial_generic
Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial
Driver core
Nov 26 17:30:13 localhost udevd-event[5597]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5597]: pass_env_to_socket: passed 113
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5597]: udev_event_run: seq 1737 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1737, pid [5597] exit
with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5598]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5598]: pass_env_to_socket: passed 132
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5598]: udev_event_run: seq 1738 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1738, pid [5598] exit
with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5599]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5599]: pass_env_to_socket: passed 142
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5599]: udev_event_run: seq 1739 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1739, pid [5599] exit
with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5600]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5600]: pass_env_to_socket: passed 148
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5600]: udev_event_run: seq 1740 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1740, pid [5600] exit
with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1741 forked, pid
[5601], 'add' 'module', 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1742 forked, pid
[5602], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial
support registered for Handspring Visor / Palm OS
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1743 forked, pid
[5603], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial
support registered for Sony Clie 3.5
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1744 forked, pid
[5604], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial
support registered for Sony Clie 5.0
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1745 forked, pid
[5605], 'add' 'drivers', 0 seconds old
Nov 26 17:30:13 localhost kernel: visor 1-1:1.0: usb_probe_interface
Nov 26 17:30:13 localhost kernel: visor 1-1:1.0: usb_probe_interface - got id
Nov 26 17:30:13 localhost udevd-event[5601]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5601]: pass_env_to_socket: passed 105
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5601]: udev_event_run: seq 1741 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1741, pid [5601] exit
with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5602]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5602]: pass_env_to_socket: passed 138
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5602]: udev_event_run: seq 1742 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1742, pid [5602] exit
with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5603]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5603]: pass_env_to_socket: passed 144
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5603]: udev_event_run: seq 1743 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1743, pid [5603] exit
with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5604]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5604]: pass_env_to_socket: passed 140
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5604]: udev_event_run: seq 1744 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1744, pid [5604] exit
with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5605]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:13 localhost udevd-event[5605]: pass_env_to_socket: passed 124
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5605]: udev_event_run: seq 1745 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1745, pid [5605] exit
with 0, 0 seconds old
Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS: port 1,
is for Generic use
Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS: port 2,
is for HotSync use
Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS: Number
of ports: 2
Nov 26 17:30:13 localhost kernel: visor 1-1:1.0: Handspring Visor / Palm OS
converter detected
Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS converter
now attached to ttyUSB0
Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS converter
now attached to ttyUSB1
Nov 26 17:30:13 localhost kernel: usbcore: registered new driver visor
Nov 26 17:30:13 localhost kernel: drivers/usb/serial/visor.c: USB HandSpring
Visor / Palm OS driver
Nov 26 17:30:13 localhost udevd-event[5595]: run_program: '/sbin/modprobe'
returned with status 0
Nov 26 17:30:13 localhost udevd-event[5595]: pass_env_to_socket: passed 322
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:13 localhost udevd-event[5595]: udev_event_run: seq 1735 finished
Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1735, pid [5595] exit
with 0, 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1736 forked, pid
[5606], 'add' 'usb_device', 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1746 forked, pid
[5607], 'add' 'usb-serial', 0 seconds old
Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1748 forked, pid
[5608], 'add' 'usb-serial', 0 seconds old
Nov 26 17:30:13 localhost udevd-event[5606]: run_program: '/bin/sh -c
'K=usbdev1.5; K=${K#usbdev}; printf bus/usb/%03i/%03i ${K%%.*} ${K#*.}''
Nov 26 17:30:13 localhost udevd-event[5606]: run_program: '/bin/sh' (stdout)
'bus/usb/001/005'
Nov 26 17:30:13 localhost udevd-event[5606]: run_program: '/bin/sh' returned
with status 0
Nov 26 17:30:13 localhost udevd-event[5606]: udev_rules_get_name: rule applied,
'usbdev1.5' becomes 'bus/usb/001/005'
Nov 26 17:30:13 localhost udevd-event[5606]: udev_db_get_device: no db file to
read /dev/.udev/db/[EMAIL PROTECTED]@usbdev1.5: No such file or directory
Nov 26 17:30:13 localhost udevd-event[5606]: udev_node_add: creating device
node '/dev/bus/usb/001/005', major = '189', minor = '4', mode = '0664', uid =
'0', gid = '0'
Nov 26 17:30:13 localhost udevd-event[5606]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:14 localhost udevd-event[5606]: pass_env_to_socket: passed 271
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:14 localhost udevd-event[5606]: udev_event_run: seq 1736 finished
Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1736, pid [5606] exit
with 0, 1 seconds old
Nov 26 17:30:14 localhost udevd-event[5607]: wait_for_sysfs: file
'/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/ttyUSB0/bus' appeared
after 0 loops
Nov 26 17:30:14 localhost udevd-event[5607]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:14 localhost udevd-event[5607]: pass_env_to_socket: passed 219
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:14 localhost udevd-event[5607]: udev_event_run: seq 1746 finished
Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1746, pid [5607] exit
with 0, 1 seconds old
Nov 26 17:30:14 localhost udevd[5584]: udev_event_run: seq 1747 forked, pid
[5610], 'add' 'tty', 1 seconds old
Nov 26 17:30:14 localhost udevd-event[5608]: wait_for_sysfs: file
'/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/ttyUSB1/bus' appeared
after 0 loops
Nov 26 17:30:14 localhost udevd-event[5608]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:14 localhost udevd-event[5608]: pass_env_to_socket: passed 219
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:14 localhost udevd-event[5608]: udev_event_run: seq 1748 finished
Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1748, pid [5608] exit
with 0, 1 seconds old
Nov 26 17:30:14 localhost udevd[5584]: udev_event_run: seq 1749 forked, pid
[5611], 'add' 'tty', 1 seconds old
Nov 26 17:30:14 localhost udevd-event[5610]: udev_rules_get_name: add symlink
'pilot'
Nov 26 17:30:14 localhost udevd-event[5610]: udev_rules_get_name: no node name
set, will use kernel name 'ttyUSB0'
Nov 26 17:30:14 localhost udevd-event[5610]: udev_db_get_device: no db file to
read /dev/.udev/db/[EMAIL PROTECTED]@ttyUSB0: No such file or directory
Nov 26 17:30:14 localhost udevd-event[5610]: udev_node_add: creating device
node '/dev/ttyUSB0', major = '188', minor = '0', mode = '0660', uid = '0', gid
= '20'
Nov 26 17:30:14 localhost udevd-event[5610]: udev_node_add: creating symlink
'/dev/pilot' to 'ttyUSB0'
Nov 26 17:30:14 localhost udevd-event[5610]: udev_node_symlink: creating
symlink '/dev/pilot' to 'ttyUSB0'
Nov 26 17:30:14 localhost udevd-event[5610]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:14 localhost udevd-event[5610]: pass_env_to_socket: passed 283
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:14 localhost udevd-event[5610]: udev_event_run: seq 1747 finished
Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1747, pid [5610] exit
with 0, 1 seconds old
Nov 26 17:30:14 localhost udevd-event[5611]: udev_rules_get_name: add symlink
'pilot'
Nov 26 17:30:14 localhost udevd-event[5611]: udev_rules_get_name: no node name
set, will use kernel name 'ttyUSB1'
Nov 26 17:30:14 localhost udevd-event[5611]: udev_db_get_device: no db file to
read /dev/.udev/db/[EMAIL PROTECTED]@ttyUSB1: No such file or directory
Nov 26 17:30:14 localhost udevd-event[5611]: udev_node_add: creating device
node '/dev/ttyUSB1', major = '188', minor = '1', mode = '0660', uid = '0', gid
= '20'
Nov 26 17:30:14 localhost udevd-event[5611]: udev_node_add: creating symlink
'/dev/pilot' to 'ttyUSB1'
Nov 26 17:30:14 localhost udevd-event[5611]: udev_node_symlink: link
'/dev/pilot' points to different target 'ttyUSB0', delete it
Nov 26 17:30:14 localhost udevd-event[5611]: udev_node_symlink: creating
symlink '/dev/pilot' to 'ttyUSB1'
Nov 26 17:30:14 localhost udevd-event[5611]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:14 localhost udevd-event[5611]: pass_env_to_socket: passed 283
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:14 localhost udevd-event[5611]: udev_event_run: seq 1749 finished
Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1749, pid [5611] exit
with 0, 1 seconds old
Nov 26 17:30:14 localhost kernel: ohci_hcd 0000:00:02.0: urb f4db6b40 path 1
ep2in 5e160000 cc 5 --> status -110
Nov 26 17:30:14 localhost udevd[5584]: udev_event_run: seq 1750 forked, pid
[5612], 'remove' 'usb', 0 seconds old
Nov 26 17:30:14 localhost udevd[5584]: udev_event_run: seq 1751 forked, pid
[5613], 'remove' 'usb_device', 0 seconds old
Nov 26 17:30:14 localhost kernel: hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
Nov 26 17:30:14 localhost kernel: ohci_hcd 0000:00:02.0: GetStatus
roothub.portstatus [0] = 0x00030100 PESC CSC PPS
Nov 26 17:30:14 localhost kernel: hub 1-0:1.0: port 1, status 0100, change
0003, 12 Mb/s
Nov 26 17:30:14 localhost kernel: usb 1-1: USB disconnect, address 5
Nov 26 17:30:14 localhost kernel: usb 1-1: usb_disable_device nuking all URBs
Nov 26 17:30:14 localhost kernel: usb 1-1: unregistering interface 1-1:1.0
Nov 26 17:30:14 localhost kernel: visor 1-1:1.0: device disconnected
Nov 26 17:30:14 localhost kernel: usb 1-1:1.0: uevent
Nov 26 17:30:14 localhost kernel: usb 1-1: unregistering device
Nov 26 17:30:14 localhost kernel: usb 1-1: uevent
Nov 26 17:30:14 localhost kernel: hub 1-0:1.0: debounce: port 1: total 100ms
stable 100ms status 0x100
Nov 26 17:30:16 localhost udevd-event[5612]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:16 localhost udevd-event[5612]: pass_env_to_socket: passed 328
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:16 localhost udevd-event[5612]: udev_event_run: seq 1750 finished
Nov 26 17:30:16 localhost udevd[5584]: udev_done: seq 1750, pid [5612] exit
with 0, 2 seconds old
Nov 26 17:30:16 localhost udevd[5584]: udev_event_run: seq 1752 forked, pid
[5614], 'remove' 'usb', 2 seconds old
Nov 26 17:30:16 localhost udevd-event[5613]: udev_db_get_device: found a
symlink as db file
Nov 26 17:30:16 localhost udevd-event[5613]: udev_node_remove: removing device
node '/dev/bus/usb/001/005'
Nov 26 17:30:16 localhost udevd-event[5613]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:16 localhost udevd-event[5613]: pass_env_to_socket: passed 277
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:16 localhost udevd-event[5613]: udev_event_run: seq 1751 finished
Nov 26 17:30:16 localhost udevd[5584]: udev_done: seq 1751, pid [5613] exit
with 0, 2 seconds old
Nov 26 17:30:16 localhost udevd-event[5614]: pass_env_to_socket: passed -1
bytes to socket '/org/kernel/udev/monitor',
Nov 26 17:30:16 localhost udevd-event[5614]: pass_env_to_socket: passed 179
bytes to socket '/org/freedesktop/hal/udev_event',
Nov 26 17:30:16 localhost udevd-event[5614]: udev_event_run: seq 1752 finished
Nov 26 17:30:16 localhost udevd[5584]: udev_done: seq 1752, pid [5614] exit
with 0, 2 seconds old
Version: KPilot 4.6.0 (blivit)
Version: pilot-link 0.12.1
Version: KDE 3.5.5
Version: Qt 3.3.7
HotSync-Protokoll
17:51:02 KPilot Dämon wird gestartet ...
17:51:03 Der Status des Dämons ist "läuft nicht"
17:51:03 Pilot-Gerät /dev/ttyUSB1 existiert nicht. Das Gerät ist wahrscheinlich ein USB-Gerät und erscheint erst während einem Abgleich.
17:51:44 Geräteverbindung hergestellt.
