On Wed, Jan 12, 2005 at 01:00:05PM +0100, maximilian attems wrote: > On Tue, 11 Jan 2005, Philip Armstrong wrote: > > Linux version 2.6.10-1-686 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian > > 1:3.3.5-5)) #1 Sun Jan 9 01:40:18 EST 2005 > .. > > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > > PIIX4: IDE controller at PCI slot 0000:00:07.1 > > PCI: Unable to reserve I/O region #5:[EMAIL PROTECTED] for device > > 0000:00:07.1 > that smells bad > > Probing IDE interface ide0... > > hda: IBM-DADA-26480, ATA DISK drive > > hdb: MATSHITADVD-ROM SR-8171, ATAPI CD/DVD-ROM drive > > Probing IDE interface ide1... > > ide1: Wait for ready failed before probe ! > > Probing IDE interface ide2... > > ide2: Wait for ready failed before probe ! > > Probing IDE interface ide3... > > ide3: Wait for ready failed before probe ! > > Probing IDE interface ide4... > > ide4: Wait for ready failed before probe ! > > Probing IDE interface ide5... > > ide5: Wait for ready failed before probe ! > > elevator: using anticipatory as default io scheduler > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > hda: max request size: 128KiB > > hda: 12594960 sectors (6448 MB) w/460KiB Cache, CHS=13328/15/63 > > hda: cache flushes not supported > > /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 > > > 2.6.9 is borked for piix, but 2.6.10 works for other, > aboves doesn't look like ide breakage, > but could be related to acpi. > > can you try to boot 2.6.10 appended with "pci=noacpi" > and post that dmesg.
ACPI is disabled anyway -- the BIOS on this laptop is pre 1999. I'll try explicitly disabling it though. Phil -- http://www.kantaka.co.uk/ .oOo. public key: http://www.kantaka.co.uk/gpg.txt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
