Package: kernel-image-2.6.8-2-386
Version: 2.6.8-13
Severity: normal
Kernel oopses with AVM B1. dmesg and ksymmops is
attached. I'd be happy to give more information.
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i586)
Kernel: Linux 2.6.8-2-386
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Versions of packages kernel-image-2.6.8-2-386 depends on:
ii coreutils [fileutils] 5.2.1-2 The GNU core utilities
ii fileutils 5.2.1-2 The GNU file management utilities
ii initrd-tools 0.1.77 tools to create initrd image for p
ii module-init-tools 3.2-pre1-2 tools for managing Linux kernel mo
-- no debconf information
capiinit start:
CAPI Subsystem Rev 1.1.2.8
capifs: Rev 1.1.2.3
capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
b1: revision 1.1.2.2
b1isa: revision 1.1.2.3
kcapi: Controller 1: b1isa-150 attached
b1isa: AVM B1 ISA at i/o 0x150, irq 12, revision 1
b1isa-150: card 1 "B1" ready.
b1isa-150: card 1 Protocol: DSS1
b1isa-150: card 1 Linetype: point to point
b1isa-150: B1-card (3.09-10) now active
kcapi: card 1 "b1isa-150" ready.
capiinit stop:
kcapi: card 1 down.
Unable to handle kernel paging request at virtual address c8a1c4dc
printing eip:
c8a1c4dc
*pde = 01234067
*pte = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: capi capifs kernelcapi nfsd exportfs lockd sunrpc cls_fw ipt_MARK ipt_length iptable_mangle sch_htb ipt_MASQUERADE ipt_LOG ipt_state iptable_nat ip_conntrack iptable_filter ip_tables ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt af_packet ipv6 ohci_hcd usbcore ali_agp agpgart pcspkr rtc floppy parport_pc parport evdev dm_mod capability commoncap 3c59x e100 mii ppp_generic slhc eeprom w83781d i2c_sensor i2c_ali15x3 i2c_core msr cpuid ext3 jbd ide_generic ide_disk alim15x3 pdc202xx_new ide_core raid1 md unix font vesafb cfbcopyarea cfbimgblt cfbfillrect
CPU: 0
EIP: 0060:[<c8a1c4dc>] Not tainted
EFLAGS: 00010282 (2.6.8-2-386)
EIP is at 0xc8a1c4dc
eax: c8a66560 ebx: c3de9cc8 ecx: 00000000 edx: c05c3f5c
esi: c8a66560 edi: c8a66560 ebp: 00000400 esp: c05c3f34
ds: 007b es: 007b ss: 0068
Process capiinit (pid: 4881, threadinfo=c05c2000 task=c6c8e2b0)
Stack: c8a5f958 c3de9cc8 c70594e0 c015d845 c70594e0 c8a66560 40018000 00000000
00100073 00000000 00000000 00000000 00000000 c3af0ba0 c05c3fac 00000400
c014480a c3af0ba0 40018000 00000400 c05c3fac c3af0ba0 fffffff7 401448a0
Call Trace:
[<c8a5f958>] controller_show+0x15/0x53 [kernelcapi]
[<c015d845>] seq_read+0xd6/0x23d
[<c014480a>] vfs_read+0xaf/0xd9
[<c01449e6>] sys_read+0x3b/0x63
[<c0105f97>] syscall_call+0x7/0xb
Code: Bad EIP value.
[EMAIL PROTECTED]:~# ksymoops < oops.txt
ksymoops 2.4.9 on i586 2.6.8-2-386. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.8-2-386/ (default)
-m /boot/System.map-2.6.8-2-386 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Error (regular_file): read_ksyms stat /proc/ksyms failed
ksymoops: No such file or directory
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Unable to handle kernel paging request at virtual address c8a1c4dc
c8a1c4dc
*pde = 01234067
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c8a1c4dc>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282 (2.6.8-2-386)
eax: c8a66560 ebx: c3de9cc8 ecx: 00000000 edx: c05c3f5c
esi: c8a66560 edi: c8a66560 ebp: 00000400 esp: c05c3f34
ds: 007b es: 007b ss: 0068
Stack: c8a5f958 c3de9cc8 c70594e0 c015d845 c70594e0 c8a66560 40018000 00000000
00100073 00000000 00000000 00000000 00000000 c3af0ba0 c05c3fac 00000400
c014480a c3af0ba0 40018000 00000400 c05c3fac c3af0ba0 fffffff7 401448a0
Call Trace:
[<c8a5f958>] controller_show+0x15/0x53 [kernelcapi]
[<c015d845>] seq_read+0xd6/0x23d
[<c014480a>] vfs_read+0xaf/0xd9
[<c01449e6>] sys_read+0x3b/0x63
[<c0105f97>] syscall_call+0x7/0xb
Code: Bad EIP value.
>>EIP; c8a1c4dc <__crc_acpi_evaluate_reference+7cee6/22285e> <=====
>>eax; c8a66560 <__crc_acpi_evaluate_reference+c6f6a/22285e>
>>ebx; c3de9cc8 <__crc_in_group_p+f8ba0/108953>
>>edx; c05c3f5c <pg0+25ff5c/6fbdbd>
>>esi; c8a66560 <__crc_acpi_evaluate_reference+c6f6a/22285e>
>>edi; c8a66560 <__crc_acpi_evaluate_reference+c6f6a/22285e>
>>esp; c05c3f34 <pg0+25ff34/6fbdbd>
Trace; c8a5f958 <__crc_acpi_evaluate_reference+c0362/22285e>
Trace; c015d845 <seq_read+d6/23d>
Trace; c014480a <vfs_read+af/d9>
Trace; c01449e6 <sys_read+3b/63>
Trace; c0105f97 <syscall_call+7/b>
1 warning and 1 error issued. Results may not be reliable.
[EMAIL PROTECTED]:~#
Linux version 2.6.8-2-386 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian
1:3.3.5-6)) #1 Mon Jan 24 03:01:58 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ffc000 (usable)
BIOS-e820: 0000000007ffc000 - 0000000007fff000 (ACPI data)
BIOS-e820: 0000000007fff000 - 0000000008000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB LOWMEM available.
On node 0 totalpages: 32764
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 28668 pages, LIFO batch:6
HighMem zone: 0 pages, LIFO batch:1
DMI 2.0 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f81a0
ACPI: RSDT (v001 ASUS P5A 0x58582e31 ASUS 0x31303030) @ 0x07ffc000
ACPI: FADT (v001 ASUS P5A 0x58582e31 ASUS 0x31303030) @ 0x07ffc080
ACPI: BOOT (v001 ASUS P5A 0x58582e31 ASUS 0x31303030) @ 0x07ffc040
ACPI: DSDT (v001 ASUS P5A 0x00001000 MSFT 0x01000001) @ 0x00000000
ACPI: PM-Timer IO Port: 0xec08
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=900 video=vga16:off
acpi=force devfs=mount
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 512 (order 9: 4096 bytes)
PM-Timer running at invalid rate: 200% of normal - aborting.
Detected 400.953 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 122416k/131056k available (1335k kernel code, 8084k reserved, 733k
data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 792.57 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000
CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4360k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf06c0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fd1d0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xd200, dseg 0xf0000
pnp: 00:11: ioport range 0x290-0x297 has been reserved
pnp: 00:11: ioport range 0x40b-0x40b has been reserved
pnp: 00:11: ioport range 0x480-0x49f has been reserved
pnp: 00:11: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:11: ioport range 0xec00-0xec3f has been reserved
pnp: 00:11: ioport range 0xe800-0xe83f has been reserved
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:09.1[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:0f.0[A]: no GSI
Simple Boot Flag at 0x46 set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI interrupt 0000:00:09.1[A] -> GSI 9 (level, low) -> IRQ 9
ttyS14 at I/O 0xd800 (irq = 9) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4360 blocks [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Mounted devfs on /dev
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: raid1 personality registered as nr 3
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20269: IDE controller at PCI slot 0000:00:0c.0
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11
PDC20269: chipset revision 2
PDC20269: 100% native mode on irq 11
ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio
hde: IC35L120AVV207-0, ATA DISK drive
Using anticipatory io scheduler
ide2 at 0xb800-0xb807,0xb402 on irq 11
hde: max request size: 1024KiB
hde: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host2/bus0/target0/lun0: p1
hdg: IC35L120AVV207-0, ATA DISK drive
ide3 at 0xb000-0xb007,0xa802 on irq 11
hdg: max request size: 1024KiB
hdg: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host2/bus1/target0/lun0: p1
ALI15X3: IDE controller at PCI slot 0000:00:0f.0
ACPI: PCI interrupt 0000:00:0f.0[A]: no GSI
ALI15X3: chipset revision 193
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:pio
hda: ST32122A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 4124736 sectors (2111 MB) w/128KiB Cache, CHS=4092/16/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2
hdc: ST32532A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 128KiB
hdc: 4995648 sectors (2557 MB) w/128KiB Cache, CHS=4956/16/63, UDMA(33)
/dev/ide/host0/bus1/target0/lun0: p1 p2 p3
md: md0 stopped.
md: bind<hdc1>
md: bind<hda1>
raid1: raid set md0 active with 2 out of 2 mirrors
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 60472k swap on /dev/hda2. Priority:-1 extents:1
Adding 68536k swap on /dev/hdc2. Priority:-2 extents:1
EXT3 FS on md0, internal journal
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
e100: eth0: e100_probe: addr 0xde800000, irq 5, MAC addr 00:02:B3:29:7A:84
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd000. Vers LK1.1.19
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED]
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdg1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hde1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
inserting floppy driver for 2.6.8-2-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Real Time Clock Driver v1.12
input: PC Speaker
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected ALi M1541 chipset
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: AGP aperture is 64M @ 0xe0000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:00:02.0: ALi Corporation USB 1.1 Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 9, pci mem c8916000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
