Package: kernel-image-2.6.7-1-686-smp Severity: normal On a newly-installed Dell PowerEdge 2600 I get the following on boot:
hw_random hardware driver 1.0.0 loaded kobject_register failed for aic79xx (-17) [kobject_register+91/96] kobject_register+0x5b/0x60 [bus_add_driver+80/176] bus_add_driver+0x50/0xb0 [pci_register_driver+110/160] pci_register_driver+0x6e/0xa0 [__crc_msleep+1554966/6815478] ahd_linux_pci_init+0xf/0x20 [aic79xx] [__crc_msleep+1518092/6815478] ahd_linux_detect+0x45/0x90 [aic79xx] [__crc_pm_idle+1110416/5541136] ahd_linux_init+0xf/0x22 [aic79xx] [sys_init_module+280/576] sys_init_module+0x118/0x240 [sysenter_past_esp+82/113] sysenter_past_esp+0x52/0x71 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[EMAIL PROTECTED]> and others Unable to handle kernel paging request at virtual address f9bdf67c printing eip: c01b3b60 *pde = 3601e067 *pte = 00000000 Oops: 0002 [#1] PREEMPT SMP Modules linked in: eepro100 piix hw_random uhci_hcd usbcore pciehp shpchp pci_hotplug evdev e100 mii e1000 cfi_cmdset_0001 jedec_probe gen_probe ich2rom mtdcore chipreg capability commoncap bonding ide_cd ide_core cdrom rtc isofs reiserfs sd_mod megaraid aic7xxx scsi_mod unix font vesafb cfbcopyarea cfbimgblt cfbfillrect CPU: 0 EIP: 0060:[kobject_add+112/256] Not tain ted EFLAGS: 00010292 (2.6.7-1-686-smp) EIP is at kobject_add+0x70/0x100 eax: c030cea4 ebx: f9b3d400 ecx: f9bdf67c edx: f9b3d41c esi: ffffffea edi: c030ceac ebp: f9b3d3e4 esp: f635df3c ds: 007b es: 007b ss: 0068 Process modprobe (pid: 1855, threadinfo=f635c000 task=f61a91e0) Stack: c030ceac f9b3d400 f9b3d400 ffffffea 00000000 c01b3c18 f9b3d400 f9b3d400 c030ce40 f9b3d400 c030ce40 c0204340 f9b3d400 f9b3a89a f9b3d3c0 00000001 f9b3d460 c02d4784 c01be5ce f9b3d3e4 c02d47a0 f9b3d9e0 f635c000 f8a1f01c Call Trace: [kobject_register+40/96] kobject_register+0x28/0x60 [bus_add_driver+80/176] bus_add_driver+0x50/0xb0 [pci_register_driver+110/160] pci_register_driver+0x6e/0xa0 [__crc_pm_idle+1110429/5541136] eepro100_init_module+0x1c/0x28 [eepro100] [sys_init_module+280/576] sys_init_module+0x118/0x240 [sysenter_past_esp+82/113] sysenter_past_esp+0x52/0x71 Code: 89 11 89 4a 04 8b 43 28 8b 30 8d 4e 48 89 c8 ba ff ff 00 00 The machine continues to boot happily, however. When I boot a Dell PowerEdge 2650, however, it produces similar problems trying to modprobe for aic7xxx and hangs (sorry I can't provide a trace - it never gets to mount a filesystem). It doesn't have an Adaptec SCSI card. Note that there is no problem booting with kernel-image-2.6.6-2-686-smp on either of these machines. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.7-1-686 Locale: LANG=en_GB, LC_CTYPE=en_GB This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.
